Post-synthesis incorporation of Al into germanosilicate ITH zeolites : the influence of treatment conditions on the acidic properties and catalytic behavior in tetrahydropyranylation

M. S. thanks the Czech Science Foundation for support through the project 14-30898P. M. O. acknowledges the Czech Science Foundation for the project 13-17593P. R. E. M. thanks the EPSRC for funding (EP/K025112/1 and EP/L014475/1).Post-synthesis alumination of germanosilicate medium-pore ITH zeolites was shown to be an effective procedure for tuning their acidity. Treatment of ITH zeolites synthesized with different chemical compositions (i.e. Si/Ge = 2.5, 4.4 and 5.8) with aqueous Al(NO3)3 solution led to the formation of strong Brønsted and Lewis acid sites and an increasing fraction of ultramicro- and meso-pores in Ge-rich ITH samples (Si/Ge = 2.5 and 4.4). The concentration of Al incorporated into the framework increases with decreasing Si/Ge ratio of the parent ITH. The increasing temperature of alumination from 80 to 175 °C (HT conditions) resulted in (1) a 1.5-2-fold increase in the concentration of Brønsted acid sites formed and (2) a decreasing fraction of framework Al atoms detectable with base probe molecules (i.e. pyridine, 2,6-di-tert-butylpyridine), i.e. an increased concentration of the "inner" acid sites. The activity of prepared Al-substituted ITH zeolites in tetrahydropyranylation of alcohols is enhanced with increasing amount of accessible acid sites in bulky crystals (e.g. alumination at lower temperature) or with increasing total concentration of acid centres within tiny ITH crystals (e.g. alumination under HT conditions). This trend became more prominent with increasing kinetic diameter of the substrate molecules under investigation (methanol <1-propanol <1-hexanol).PostprintPeer reviewe

Liquid Metal Boosting Stability of Methanol to Hydrocarbons Conversion

International audienc

Total Oxidation of Toluene and Propane over Supported Co3O4 Catalysts: Effect of Structure/Acidity of MWW Zeolite and Cobalt Loading

International audienceA set of supported Co3O4 catalysts have been designed and prepared to study the effect of textural characteristics and Brønsted acid sites concentration of MWW zeolite support, as well as cobalt loading on catalyst activity. Detailed characterization of the catalysts with a thorough study on their performance in the total oxidation of toluene and propane revealed that MCM-22 is the optimal support and that increasing Si/Al and decreasing external surface of MCM-22 positively affect the activity of supported Co3O4 catalysts, which is determined by their low-temperature reducibility. The activity of the Co/MCM-22 catalysts increased with cobalt content (5-20 wt %), consistent with enhancing the amount of low-temperature reducible Co3O4. The optimized catalyst containing 20% Co supported on dealuminated MCM-22 presented high turnover frequency (TOF) values in both toluene (2.6 × 10-5 s-1 at 270 °C) and propane (3.9 × 10-5 s-1 at 215 °C) oxidation and was characterized by outstanding cycling stability, long-term durability, water tolerance, and sintering resistance

The ADOR mechanism for the synthesis of new zeolites

This work was supported by the Czech Science Foundation Grant No. P106/12/G015 (Centre of Excellence) and Grant No. 14-30898P (MS only). W.J.R acknowledges partial financial support provided by the National Science Centre Poland with a grant approved under No. DEC-2011/03/B/ST5/01551. R.E.M. thanks the Royal Society for provision of an industry fellowship and the E.P.S.R.C. for funding (EP/K025112/1 and EP/L014475/1).A novel methodology, called ADOR (assembly-disassembly-organisation-reassembly), for the synthesis of zeolites is reviewed here in detail. The ADOR mechanism stems from the fact that certain chemical weakness against a stimulus may be present in a zeolite framework, which can then be utilized for the preparation of new solids through successive manipulation of the material. In this review, we discuss the critical factors of germanosilicate zeolites required for application of the ADOR protocol and describe the mechanism of hydrolysis, organisation and condensation to form new zeolites starting from zeolite UTL. Last but not least, we discuss the potential of this methodology to form other zeolites and the prospects for future investigations.PostprintPeer reviewe

The ADOR mechanism for the synthesis of new zeolites

A novel methodology, called ADOR (assembly-disassembly-organisation-reassembly), for the synthesis of zeolites is reviewed here in detail. The ADOR mechanism stems from the fact that certain chemical weakness against a stimulus may be present in a zeolite framework, which can then be utilized for the preparation of new solids through successive manipulation of the material. In this review, we discuss the critical factors of germanosilicate zeolites required for application of the ADOR protocol and describe the mechanism of hydrolysis, organisation and condensation to form new zeolites starting from zeolite UTL. Last but not least, we discuss the potential of this methodology to form other zeolites and the prospects for future investigations

Post-synthesis incorporation of Al into germanosilicate ITH zeolites:the influence of treatment conditions on the acidic properties and catalytic behavior in tetrahydropyranylation

Post-synthesis alumination of germanosilicate medium-pore ITH zeolites was shown to be an effective procedure for tuning their acidity. Treatment of ITH zeolites synthesized with different chemical compositions (i.e. Si/Ge = 2.5, 4.4 and 5.8) with aqueous Al(NO3)3 solution led to the formation of strong Brønsted and Lewis acid sites and an increasing fraction of ultramicro- and meso-pores in Ge-rich ITH samples (Si/Ge = 2.5 and 4.4). The concentration of Al incorporated into the framework increases with decreasing Si/Ge ratio of the parent ITH. The increasing temperature of alumination from 80 to 175 °C (HT conditions) resulted in (1) a 1.5-2-fold increase in the concentration of Brønsted acid sites formed and (2) a decreasing fraction of framework Al atoms detectable with base probe molecules (i.e. pyridine, 2,6-di-tert-butylpyridine), i.e. an increased concentration of the "inner" acid sites. The activity of prepared Al-substituted ITH zeolites in tetrahydropyranylation of alcohols is enhanced with increasing amount of accessible acid sites in bulky crystals (e.g. alumination at lower temperature) or with increasing total concentration of acid centres within tiny ITH crystals (e.g. alumination under HT conditions). This trend became more prominent with increasing kinetic diameter of the substrate molecules under investigation (methanol &lt;1-propanol &lt;1-hexanol).</p

Liquid metals for boosting stability of zeolite catalysts in the conversion of methanol to hydrocarbons

Abstract Methanol-to-hydrocarbons (MTH) process has been considered one of the most practical approaches for producing value-added products from methanol. However, the commonly used zeolite catalysts suffer from rapid deactivation due to coke deposition and require regular regeneration treatments. We demonstrate that low-melting-point metals, such as Ga, can effectively promote more stable methanol conversion in the MTH process by slowing coke deposition and facilitating the desorption of carbonaceous species from the zeolite. The ZSM-5 zeolite physically mixed with liquid gallium exhibited an enhanced lifetime in the MTH reaction, which increased by a factor of up to ~14 as compared to the parent ZSM-5. These results suggest an alternative route to the design and preparation of deactivation-resistant zeolite catalysts