1,613 research outputs found
Toroidal ripple transport of beam ions in the mega-ampeĢre spherical tokamak
The transport of injected beam ions due to toroidalmagnetic field ripple in the mega-ampĆØre spherical tokamak (MAST) is quantified using a full orbit particle tracking code, with collisional slowing-down and pitch-angle scattering by electrons and bulk ions taken into account. It is shown that the level of ripple losses is generally rather low, although it depends sensitively on the major radius of the outer midplane plasma edge; for typical values of this parameter in MAST plasmas, the reduction in beam heating power due specifically to ripple transport is less than 1%, and the ripple contribution to beam ion diffusivity is of the order of 0.1 mĀ² sā»Ā¹ or less. It is concluded that ripple effects make only a small contribution to anomalous transport rates that have been invoked to account for measured neutron rates and plasma stored energies in some MAST discharges. Delayed (non-prompt) losses are shown to occur close to the outer midplane, suggesting that banana-drift diffusion is the most likely cause of the ripple-induced losses.This work was funded by the RCUK Energy Programme
under Grant EP/I501045, by the Australian Research Council,
and by the European Communities under the Contract of
Association between EURATOM and CCFE
Featural and configurational processes in the recognition of faces of different familiarity
Previous research suggests that face recognition may involve both configurational and piecemeal (featural) processing. To explore the relationship between these processing modes, we examined the patterns of recognition impairment produced by blurring, inversion, and scrambling, both singly and in various combinations. Two tasks were used: recognition of unfamiliar faces (seen once before) and recognition of highly familiar faces (celebrities). The results provide further support for a configurational - featural distinction. Recognition performance remained well above chance if faces were blurred, scrambled, inverted, or simultaneously inverted and scrambled: each of these manipulations disrupts either configurational or piecemeal processing, leaving the other mode available as a route to recognition. However, blurred/scrambled and blurred/inverted faces were recognised at or near chance levels, presumably because both configurational processing and featural processing were disrupted. Similar patterns of effects were found for both familiar and unfamiliar faces, suggesting that the relationship between configurational and featural processing is qualitatively similar in both cases
Calibration of the high-frequency magnetic fluctuation diagnostic in plasma devices
The increasing reservoirs of energetic particles which drive high-frequency modes, together with advances in the understanding of magnetohydrodynamics, have led to a need for higher-frequency (50 kHz to >20MHz) measurements of magnetic field fluctuations in magnetic fusion devices such as tokamaks. This article uses transmission line equations to derive the voltage response of a Mirnov coil at the digitizer end of a transmission line of length ā. It is shown that, depending on the terminations of the line, resonances can occur even for ā/Ī»āŖ”1, with Ī» the wavelength of a fluctuation in the transmission line. A lumped-circuit model based on the approach of Heeter et al. [R. F. Heeter, A. F. Fasoli, S. Ali-Arshad, and J. M. Moret. Rev. Sci. Instrum.71, 4092 (2000)] is extended to enable the inclusion simultaneously of both serial resistance and parallel conductance elements. As originally proposed by Heeter et al. the lumped-circuit model offers the advantage of remote calibration; this may be of particular value when upgrading existing systems to operate at frequencies above the original design specification. It is formally shown that the transmission line equations for the transfer function and measured impedance reduce to those of the lumped circuit model of Heeter et al. under specific conditions. The result extends the use of the lumped-circuit model of Heeter et al., which can be used to extract the transfer function from measurement of the impedance, beyond the case of an open-circuit termination. Although the numerical procedure does exhibit some problems associated with non-uniqueness, it provides a simple calibration method for systems that are not well defined. Using typical parameters for a high-frequency Mirnov coil installed on the Joint European Torus (JET) tokamak, the lumped-circuit approximation agrees with the steady-state transmission line model to within 0.015Ā° in phase and 22% in amplitude for frequencies up to 1 MHz. A matched termination, though eliminating line resonances and reducing the length of time for the system to reach steady state, is inappropriate for the JET-type coils which exhibit significant temperature-dependent resistance. Finally, for fluctuations of finite duration, a method of computing the discrepancy due to the simplifying assumption of Fourier-stationary conditions is described.This work was funded jointly by the United Kingdom
Engineering and Physical Sciences Research Council and by EURATOM
On steady poloidal and toroidal flows in tokamak plasmas
The effects of poloidal and toroidalflows on tokamakplasma equilibria are examined in the magnetohydrodynamic limit. āTransonicā poloidal flows of the order of the sound speed multiplied by the ratio of poloidal magnetic field to total field Bā/B can cause the (normally elliptic) GradāShafranov (GS) equation to become hyperbolic in part of the solution domain. It is pointed out that the range of poloidal flows for which the GS equation is hyperbolic increases with plasma beta and Bā/B, thereby complicating the problem of determining spherical tokamakplasma equilibria with transonic poloidal flows. It is demonstrated that the calculation of the hyperbolicity criterion can be easily modified when the assumption of isentropic flux surfaces is replaced with the more tokamak-relevant one of isothermal flux surfaces. On the basis of the latter assumption, a simple expression is obtained for the variation of density on a flux surface when poloidal and toroidalflows are simultaneously present. Combined with Thomson scattering measurements of density and temperature, this expression could be used to infer information on poloidal and toroidalflows on the high field side of a tokamakplasma, where direct measurements of flows are not generally possible. It is demonstrated that there are four possible solutions of the Bernoulli relation for the plasma density when the flux surfaces are assumed to be isothermal, corresponding to four distinct poloidal flow regimes. Finally, observations and first principles-based theoretical modeling of poloidal flows in tokamakplasmas are briefly reviewed and it is concluded that there is no clear evidence for the occurrence of supersonic poloidal flows.This work was jointly funded by the Australian Government
through International Science Linkages Grant No.
CG130047, the Australian National University, the United
Kingdom Engineering and Physical Sciences Research
Council, and by the European Communities under the contract
of Association between EURATOM and CCFE
Magnetohydrodynamic normal mode analysis of plasma with equilibrium pressure anisotropy
In this work, we generalise linear magnetohydrodynamic (MHD) stability theory
to include equilibrium pressure anisotropy in the fluid part of the analysis. A
novel 'single-adiabatic' (SA) fluid closure is presented which is complementary
to the usual 'double-adiabatic' (CGL) model and has the advantage of naturally
reproducing exactly the MHD spectrum in the isotropic limit. As with MHD and
CGL, the SA model neglects the anisotropic perturbed pressure and thus loses
non-local fast-particle stabilisation present in the kinetic approach. Another
interesting aspect of this new approach is that the stabilising terms appear
naturally as separate viscous corrections leaving the isotropic SA closure
unchanged. After verifying the self-consistency of the SA model, we re-derive
the projected linear MHD set of equations required for stability analysis of
tokamaks in the MISHKA code. The cylindrical wave equation is derived
analytically as done previously in the spectral theory of MHD and clear
predictions are made for the modification to fast-magnetosonic and slow ion
sound speeds due to equilibrium anisotropy.Comment: 19 pages. This is an author-created, un-copyedited version of an
article submitted for publication in Plasma Physics and Controlled Fusion.
IOP Publishing Ltd is not responsible for any errors or omissions in this
version of the manuscript or any version derived from i
Nonaxisymmetric, multi-region relaxed magnetohydrodynamic equilibrium solutions
We describe a magnetohydrodynamic (MHD) constrained energy functional for
equilibrium calculations that combines the topological constraints of ideal MHD
with elements of Taylor relaxation.
Extremizing states allow for partially chaotic magnetic fields and
non-trivial pressure profiles supported by a discrete set of ideal interfaces
with irrational rotational transforms.
Numerical solutions are computed using the Stepped Pressure Equilibrium Code,
SPEC, and benchmarks and convergence calculations are presented.Comment: Submitted to Plasma Physics and Controlled Fusion for publication
with a cluster of papers associated with workshop: Stability and Nonlinear
Dynamics of Plasmas, October 31, 2009 Atlanta, GA on occasion of 65th
birthday of R.L. Dewar. V2 is revised for referee
- ā¦