Design and Experimental Testing of a Solar Box Cooker with Paraffin Wax as Thermal Energy Storage Using Maiduguri Weather Condition

The performance of paraffin wax as phase change material (PCM) for thermal energy storage (TES) was investigated using a Solar Box Cooker (SBC) exposed to Maiduguri weather condition. Temperature and energy generated by SBC were experimentally established. The result shows tremendous improvement in energy storage compared to SBCs without TES in existence within Maiduguri and environs. The measured temperature and energy generated by the PCM in the experiment were 118oC and 4164.5KJ respectively, an adequate temperature and energy for cooking during off-sunshine hours and beyond. First figure of merit (F1) and second figure of merit (F2) were deduced to be 0.13 and 0.44 with overall SBC efficiency (ɳ) of 63% qualifying the SBC to grade A based on the Bureau of Indian Standards (BIS

Application of Stearic Acid for Solar Thermal Energy Storage in a Double Compartment Solar Box Cooker

Energy storage in some form is the need of the hour to even out the mismatch between energy supply and demand. Thermal Energy Storage (TES) system employing a phase change material (PCM) has been widely considered as an effective way to store and retrieve energy due to its high heat storage capacity at almost constant temperature during the phase change. In this work, an energy storage system was designed to study the heat transfer characteristics of stearic acid (as a phase change material in a double compartment solar box cooker (DCSBC) fabricated using wooden materials with high thermal energy storage system. In order to analyze the various characteristics of the PCM, the Bureau of Indian Standards (BIS) was used throughout the experiment. Investigations were performed to determine the first and second figure of merits (F1 and F2) of compartments 1 and 2 (C1 and C2) simultaneously. The results for F1 were found to be (C1= 0.14 and C2= 0.15) and F2 were (C1=0.47 and C2= 0.4) while the overall thermal efficiency of the cooker after water boiling test for C1 with 2.5kg and C2 with 3kg of water were deduced to be 77% for C1 and 92% for C2 after six hours of the load test, showing considerable temperature increase and extension of heat retention making possible to cook the dinner and even breakfast the next day

Maritime Carrier's Liability for Loss of or Damage to Goods under the Hague Rules, Visby Rules and the Hamburg Rules, Compared with His Liability as an Operator under the Relevant Rules of the International Multimodal Transport Convention

The system of the carrier's liability, in respect of carriage of goods, is a very controversial issue which raises many difficulties in solving the problems thereto related, whether in national laws or in international Conventions. The present thesis, dealing with the carrier's liability, consists of five chapters and final conclusions. The first four chapters concentrate, theoretically, practically and in detail on analysing and comparing the liability regimes in relation to the carrier's liability under the Hague/Visby Rules and the Hamburg Rules, in order to ascertain which is more conducive to international certainty and uniformity. The Hague/Visby Rules and the Hamburg Rules have played a vital role in the international transport industry. They are correspondingly discussed in the thesis. Chapter five is devoted to discussion of the liability of the multimodal transport operator as one of the most important parts of the International Multimodal Transport Convention (1980). The chapter also evaluates the situation when, in the future, the Convention comes into force. In its structure the thesis is divided as follows; chapter one deals with a brief history and the scope of application of the Rules. The liability of the carrier and the limitation of the carrier's liability are considered in chapters two and three. Chapter four deals with the procedures of action for lost or damaged cargo. The liability of the multimodal transport operator for loss or damage to the goods under the 1980 United Nations Multimodal Transport of Goods Convention is dealt with in chapter five

Combustion Modeling of a Fixed Bed Downdraft Biomass Gasifier Using Computational Fluid Dynamics Design

Thermochemical conversion of biomass in a gasifier for the production of syngas provides the enabling technology for efficient biomass resource utilization. Gasification is a complex process involving the interactions of numerous parameters, hence CFD tool is usually utilized to numerically optimize the design and operation of the gasifier reactor for improved performance. The gasification of multiple biomass usually requires a complex set of facilities for experimental set up in order to determine the optimum operating conditions for maximum gas yield. When this is not available, it can pose a bottle-neck to process development and optimization.  In this study, the GAMBIT and FLUENT were used to model and simulate the gasifier reactor with emphasis on the combustion and gasification (reduction) zones in order to maximize the thermal output of the combustor by an optimization of biomass fuel types. Model validation was achieved by showing a close agreement between numerical and experimental results within the same configuration, particularly to show the effect of temperature on the gasification of Fixed Bed Downdraft gasifier. The fraction of initial moisture content, air flow rate, temperature of the pyrolysis zone, and chemical composition of the biomass were the required input data for the model to predict the gasification temperature. Computations were carried out for rice husk, saw dust and corn cobs as gasifier fuels, whereby air was used as the oxidizing agent. The porosity and oxidizer velocity were varied between 0.1 – 0.5 and 5 – 15 m/s respectively. The predicted results compared with experimental data showed good agreement. The simulated temperature gradient also indicated that rich fuel combustion zone was greater for rice husk - corn cobs, an indication that improved gasification and pyrolysis were present

Determination of Single Sampling Attribute Plans Based Upon Dodge Roaming Model with Application

Bayesian sampling plans for production inspection involve using a sampling method to assess the features of the plan, under the assumption that defect rates fluctuate randomly among different production batches. This results in a likelihood distribution  that can be established through experience and the quality information at hand. In this study, the parameters  of a single Bayesian sampling plan were determined using the Beta-Binomial distribution, and were subsequently contrasted with parameters from other single sampling plans. Based on research findings, (Ala corporation for soft drinks) oversees the control of product quality. Since the variable fluctuates randomly between manufacturing batches, 120 batches were selected to calculate the defect rate by analyzing batch size and number of defective items. Applying Bayesian and decision-making models can lead to the development of a single sampling inspection procedure that closely approximates the actual quality level. When the decision-making model was used, the researchers discovered that the sample size was smaller and led to lower inspection costs compared to other inspection plans

Electrochemical impedance spectroscopy analysis of hole transporting material free mesoporous and planar perovskite solar cells

The future photovoltaic technologies based on perovskite materials are aimed to build low tech, truly economical, easily fabricated, broadly deployable, and trustworthy solar cells. Hole transport material (HTM) free perovskite solar cells (PSCs) are among the most likely architectures which hold a distinctive design and provide a simple way to produce large-area and cost-effective manufacture of PSCs. Notably, in the monolithic scheme of the HTM-free PSCs, all layers can be printed using highly reproducible and morphology-controlled methods, and this design has successfully been demonstrated for industrial-scale fabrication. In this review article, we comprehensively describe the recent advancements in the different types of mesoporous (nanostructured) and planar HTM-free PSCs. In addition, the effect of various nanostructures and mesoporous layers on their performance is discussed using the electrochemical impedance spectroscopy (EIS) technique. We bring together the different perspectives that researchers have developed to interpret and analyze the EIS data of the HTM-free PSCs. Their analysis using the EIS tool, the limitations of these studies, and the future work directions to overcome these limitations to enhance the performance of HTM-free PSCs are comprehensively considered.This publication was made possible by NPRP award (NPRP11S-1210-170080) from Qatar National Research Fund (a member of Qatar Foundation). The findings made herein are solely the responsibility of the authors

Monodromy of Cyclic Coverings of the Projective Line

We show that the image of the pure braid group under the monodromy action on the homology of a cyclic covering of degree d of the projective line is an arithmetic group provided the number of branch points is sufficiently large compared to the degree.Comment: 47 pages (to appear in Inventiones Mathematicae

Fixed-wing MAV attitude stability in atmospheric turbulence, part 1: Suitability of conventional sensors

Fixed-wing Micro-Aerial Vehicles (MAVs) need effective sensors that can rapidly detect turbulence induced motion perturbations. Current MAV attitude control systems rely on inertial sensors. These systems can be described as reactive; detecting the disturbance only after the aircraft has responded to the disturbing phenomena. In this part of the paper, the current state of the art in reactive attitude sensing for fixed-wing MAVs are reviewed. A scheme for classifying the range of existing and emerging sensing techniques is presented. The features and performance of the sensing approaches are discussed in the context of their application to MAV attitude control systems in turbulent environments. It is found that the use of single sensors is insufficient for MAV control in the presence of turbulence and that potential gains can be realised from multi-sensor systems. A successive paper to be published in this journal will investigate novel attitude sensors which have the potential to improve attitude control of MAVs in Turbulenc

Long-Term Stability Analysis of 3D and 2D/3D Hybrid Perovskite Solar Cells Using Electrochemical Impedance Spectroscopy

Despite the remarkable progress in perovskite solar cells (PSCs), their instability and rapid degradation over time still restrict their commercialization. A 2D capping layer has been proved to overcome the stability issues; however, an in-depth understanding of the complex degradation processes over a prolonged time at PSC interfaces is crucial for improving their stability. In the current work, we investigated the stability of a triple cation 3D ([(FA0.83MA0.17)Cs0.05]Pb(I0.83Br0.17)3) and 2D/3D PSC fabricated by a layer-by-layer deposition technique (PEAI-based 2D layer over triple cation 3D perovskite) using a state-of-art characterization technique: electrochemical impedance spectroscopy (EIS). A long-term stability test over 24 months was performed on the 3D and 2D/3D PSCs with an initial PCE of 18.87% and 20.21%, respectively, to suggest a more practical scenario. The current-voltage (J-V) and EIS results showed degradation in both the solar cell types; however, a slower degradation rate was observed in 2D/3D PSCs. Finally, the quantitative analysis of the key EIS parameters affected by the degradation in 3D and 2D/3D PSCs were discussed.This publication was made possible by NPRP award [NPRP11S-1210-170080] from Qatar National Research Fund (a member of Qatar Foundation). The findings made herein are solely the responsibility of the authors