Situation of wastewater treatment of natural rubber latex processing in the Southeastern region, Vietnam: Review paper

Rubber tree is one of the main plants which play an important role in the economy of Southeastern region, Vietnam. Approximately 90% of Vietnamese natural rubber latex is exported as raw products. The preliminary process of natural rubber latex discharges a large amount of wastewater to the environment. In Vietnam, there are many available technologies set up and operated for treatment wastewater of rubber latex processing. However, the effluent quality is still poor and the concentration of pollutants is higher than the required national technical regulation on the effluent of the natural rubber processing industry (QCVN 01:2008/BTNMT). Thus, this paper summarizes various technologies and methods currently applied for the treatment of latex processing wastewater in Vietnam. Additionally, the new effective methods being researched and applied in Thailand and Malaysia are also mentioned (countries with the highest production of natural rubber in the world). This paper also provides a screening of treatment technologies for reducing environmental pollution and contributing to high-quality effluent for meeting the required standard.Cao su là một trong những cây trồng chính và đóng vai trò quan trọng trong nền kinh tế của miền Đông Nam Bộ, Việt Nam. Sản phẩm từ cây cao su thiên nhiên tại Việt Nam chủ yếu là xuất khẩu (khoảng 90%), tuy nhiên chỉ mới là dạng cao su thiên nhiên sơ chế. Quá trình sơ chế mủ cao su thiên nhiên thải bỏ một lượng lớn nước thải vào môi trường. Ở Việt Nam, hiện tại có rất nhiều công nghệ xử lý nước thải sơ chế mủ cao su đã được thiết lập và vận hành. Tuy nhiên, nồng độ ô nhiễm trong nước thải sau quá trình xử lý còn cao so với tiêu chuẩn yêu cầu (QCVN 01:2008/BTNMT). Vì vậy, bài báo này tóm tắt những công nghệ và phương pháp khác nhau được sử dụng để xử lý nước thải sơ chế mủ cao su tại Việt Nam gần đây. Thêm vào đó, những phương pháp mới và hiệu quả đang được nghiên cứu và áp dụng tại Malaysia và Thái Lan, những quốc gia có sản lượng sản xuất mủ cao su cao nhất trên thế giới cũng được giới thiệu. Bài báo này cũng cung cấp sự đa dạng của những phương pháp xử lý nhằm giảm thiểu ô nhiễm môi trường và góp phần đảm bảo chất lượng nước đầu ra đạt tiêu chuẩn cho phép

Advanced control strategy of back-to-back PWM converters in PMSG wind power system

This paper proposes a control scheme of back-to-back PWM converters for the permanent magnet synchronous generator (PMSG) wind turbine system. The DC-link voltage can be controlled at the machine-side converter (MSC), while the grid-side converter (GSC) controls the grid active power for a maximum power point tracking (MPPT). At the grid fault condition, the DC-link voltage controller is designed using a feedback linearization (FL) theory. For the MPPT, a proportional control loop is added to the torque control to reduce the influence of the inertia moment in the wind turbines, which can improve its dynamic performance. The validity of this control algorithm has been verified by the simulation of the 2-MW PMSG wind turbine system

Research on the stability of the 3D frame on coral foundation subjected to impact load

This article presents an application of the finite element method (FEM) for the stability analysis of 3D frame (space bar system) on the coral foundation impacted by collision impulse. One-way joints between the rod and the coral foundation are described by the contact element. Numerical analysis shows the effect of some factors on the stability of the bar system on coral foundation. The results of this study can be used for stability analysis of the bar system on coral foundation subjected to sea wave load

The Right Way to be Human in Quốc Âm Thi Tập of Nguyen Trai and its Significance to Vietnam’s Modern Society

Nguyen Trai–a national hero, an excellent culturist, a judicious politician, an outstanding military counsellor, a genius diplomat and a great poet.The article does not aim to present the whole concept of Nguyen Trai, but rather to analyze his concept of the right way to be human in his work “Quốc âm thi tập” (Collected poems in the National Language) and from there put forward its significance in Vietnam’s modern society. Keywords: Collected poems in the National Language; The right way to be human; Wanting a peaceful life; Loyalty to the king -Patriotism

Research and Design of an X-Band UHF Power Amplifier

Introduction. A method for designing power amplifiers for use in the transmitting channels of X-band transceiver modules is investigated. The design process was aimed at optimizing the relationship between the basic amplifier characteristics, including the operating frequency band, output power level, output linearity, high harmonics suppression, etc.  Aim. Investigation of a method for designing an X-band UHF power amplifier, which is capable of optimizing the relationship between its main characteristics.  Materials and methods. Theoretical calculations were combined with experimental studies into the design of a UHF power amplifier. The stages of the design process are described in detail, including major ideas, principal circuits, and strip circuits. Evaluations were conducted using the Keysight ADS high frequency circuit simulation tool.  Results. A method for designing X-band UHF power amplifiers on the basis of a close combination of theory, simulation, and experimental adjustment was described in detail.  Conclusion. A prototype of an X-band PA was developed; an approach to developing a methodology for manufacturing, measuring, and testing X-band PAs is described.Introduction. A method for designing power amplifiers for use in the transmitting channels of X-band transceiver modules is investigated. The design process was aimed at optimizing the relationship between the basic amplifier characteristics, including the operating frequency band, output power level, output linearity, high harmonics suppression, etc.  Aim. Investigation of a method for designing an X-band UHF power amplifier, which is capable of optimizing the relationship between its main characteristics.  Materials and methods. Theoretical calculations were combined with experimental studies into the design of a UHF power amplifier. The stages of the design process are described in detail, including major ideas, principal circuits, and strip circuits. Evaluations were conducted using the Keysight ADS high frequency circuit simulation tool.  Results. A method for designing X-band UHF power amplifiers on the basis of a close combination of theory, simulation, and experimental adjustment was described in detail.  Conclusion. A prototype of an X-band PA was developed; an approach to developing a methodology for manufacturing, measuring, and testing X-band PAs is described

Isolation and characterization of chlorpyrifos-degrading bacteria in tea-growing soils

The excess use of pesticides in the agricultural sector has caused environmental pollution and affected the complete ecosystem. Among the various commonly used pesticides, chlorpyrifos (CPF) is widely used against multiple agrarian pests due to its effectiveness and higher insecticidal activities. However, along with its beneficial usage, CPF has various residual effects on the environment, causing multiple negative impacts on aquatic organisms and human health. Consequently, methods for eliminating CPF in the background are essential. Among the currently available approaches to CPF remediation, biological methods using microorganisms are eco-friendly and cost-effective. Therefore, this study was conducted to isolate and characterize chlorpyrifos-degrading bacteria from the tea-growing soil of Vietnam. For this, soil samples were collected from the 20 tea-growing areas of Vietnam. From the collected samples, three bacterial strains viz., Methylobacterium populi CNN2, Ensifer adhaerens VNN3, and Acinetobacter pittii CNN4 have been isolated by using streak plate method and identified based on 16S rRNA gene analysis. The study results showed that under laboratory conditions, E. adhaerens VNN3 had the highest CPF degradation ability and was followed by the strain M. populi CNN2. In liquid medium, CPF concentration (100 mg/L) was reduced by 95.2% and 81.4% by E.adhaerens VNN3 and M. populi CNN2, respectively, after 72 h. Further, under in-vitro conditions, the concentration of CPF was reduced from 500 mg/kg to 112 ± 1.73 (77.6%) and 197 ± 2.08 mg/kg (60.6%) by E. adhaerens VNN3 and M. populi CNN2, respectively. Based on the obtained results, it can be concluded that E. adhaerens VNN3 and M. populi CNN2 can be used for CPF-contaminated agricultural soil remediation

Low-Dose CT Image Denoising using Image Decomposition and Sparse Representation

X-ray computed tomography (CT) is now a widely used imaging modality for numerous medical purposes. The risk of high X-ray radiation may induce genetic, cancerous and other diseases, demanding the development of new image processing methods that are able to enhance the quality of low-dose CT images. However, lowering the radiation dose increases the noise in acquired images and hence affects important diagnostic information. This paper contributes an efficient denoising method for low-dose CT images. A noisy image is decomposed into three component images of low, medium and high frequency bands; noise is mainly presented in the medium and high component images. Then, by exploiting the fact that a small image patch of the noisy image can be approximated by a linear combination of several elements in a given dictionary of noise-free image patches generated from noise-free images taken at nearly the same position with the noisy image, noise in these medium and high component images are effectively eliminated.Specifically, we give new solutions for image decomposition to easily control the filter parameters, for dictionary construction to improve the effectiveness and reduce the running-time. Instead of using a large dataset of patches, only a structured small part of patches extracted from the raw data is used to form a dictionary, to be used in sparse coding. In addition, we illustrate the effectiveness of the proposed method in preserving image details which are subtle but clinically important. Experimental results conducted on both synthetic and real noise data demonstrate that the proposed method is competitive with the state-of-the-art methods