Numerical analysis of unsteady cavitating turbulent flow and shedding horse-shoe vortex structure around a twisted hydrofoil

AbstractCavitating turbulent flow around hydrofoils was simulated using the Partially-Averaged Navier–Stokes (PANS) method and a mass transfer cavitation model with the maximum density ratio (ρl/ρv,clip) effect between the liquid and the vapor. The predicted cavity length and thickness of stable cavities as well as the pressure distribution along the suction surface of a NACA66(MOD) hydrofoil compare well with experimental data when using the actual maximum density ratio (ρl/ρv,clip=43391) at room temperature. The unsteady cavitation patterns and their evolution around a Delft twisted hydrofoil were then simulated. The numerical results indicate that the cavity volume fluctuates dramatically as the cavitating flow develops with cavity growth, destabilization, and collapse. The predicted three dimensional cavity structures due to the variation of attack angle in the span-wise direction and the shedding cycle as well as its frequency agree fairly well with experimental observations. The distinct side-lobes of the attached cavity and the shedding U-shaped horse-shoe vortex are well captured. Furthermore, it is shown that the shedding horse-shoe vortex includes a primary U-shaped vapor cloud and two secondary U-shaped vapor clouds originating from the primary shedding at the cavity center and the secondary shedding at both cavity sides. The primary shedding is related to the collision of a radially-diverging re-entrant jet and the attached cavity surface, while the secondary shedding is due to the collision of side-entrant jets and the radially-diverging re-entrant jet. The local flow fields show that the interaction between the circulating flow and the shedding vapor cloud may be the main mechanism producing the cavitating horse-shoe vortex. Two side views described by iso-surfaces of the vapor volume fraction for a 10% vapor volume, and a non-dimensional Q-criterion equal to 200 are used to illustrate the formation, roll-up and transport of the shedding horse-shoe vortex. The predicted height of the shedding horse-shoe vortex increases as the vortex moves downstream. It is shown that the shape of the horse-shoe vortex for the non-dimensional Q-criterion is more complicated than that of the 10% vapor fraction iso-surface and is more consistent with the experiments. Further, though the time-averaged lift coefficient predicted by the PANS calculation is about 12% lower than the experimental value, it is better than other predictions based on RANS solvers

Large Eddy Simulation and theoretical investigations of the transient cavitating vortical flow structure around a NACA66 hydrofoil

AbstractCompared to non-cavitating flow, cavitating flow is much complex owing to the numerical difficulties caused by cavity generation and collapse. In this paper, the cavitating flow around a NACA66 hydrofoil is studied numerically with particular emphasis on understanding the cavitation structures and the shedding dynamics. Large Eddy Simulation (LES) was coupled with a homogeneous cavitation model to calculate the pressure, velocity, vapor volume fraction and vorticity around the hydrofoil. The predicted cavitation shedding dynamics behavior, including the cavity growth, break-off and collapse downstream, agrees fairly well with experiment. Some fundamental issues such as the transition of a cavitating flow structure from 2D to 3D associated with cavitation–vortex interaction are discussed using the vorticity transport equation for variable density flow. A simplified one-dimensional model for the present configuration is adopted and calibrated against the LES results to better clarify the physical mechanism for the cavitation induced pressure fluctuations. The results verify the relationship between pressure fluctuations and the cavity shedding process (e.g. the variations of the flow rate and cavity volume) and demonstrate that the cavity volume acceleration is the main source of the pressure fluctuations around the cavitating hydrofoil. This research provides a better understanding of the mechanism driving the cavitation excited pressure pulsations, which will facilitate development of engineering designs to control these vibrations

High-throughput dielectrophoretic cell sorting assisted by cell sliding on scalable electrode tracks made of conducting-PDMS

Dielectrophoresis (DEP) as a label-free cell separation approach in microdevices has been extensively investigated for a variety of applications. 3D microelectrodes made of conducting-PDMS inherit the merit of volumetric electrodes for generating influential DEP force throughout the entire channel depth and meanwhile, exploit low-cost fabrication process by soft lithography. However, the configuration of conducting-PDMS electrodes is limited to being embedded in sidewall of flow chamber, which leads to rather low flow rate and difficulties in extension of the flow rate. We previously reported a more effective configuration with 3D interdigitated electrodes made of silicon that assist cell sliding along solid tracks, yet such device requires expensive silicon dry etching and, moreover, the track appears to be patterned with non-straight and wavy outline, which not only hinders the flow rate but also allows cell sliding to occur only along its downstream side. Here we demonstrate low-cost silver-PDMS electrode-track featuring ideally straight outline that induces rather uniform drag to drive smooth cell sliding. Such design achieves live and dead cell separation at flow rate twice as that of silicon tracks with cell loading concentration 10 times higher. It also fully utilizes the track to enable cell sliding on both of the up- and down-stream sides. Notably, we also demonstrate that this track is expandable to be V-shape for more advanced bidirectional cell sliding, which is showcased here by tumor cells separation from lymphocytes at 1.2 mL/h. Such results greatly enhance the throughput as compared to the state-of-art conducting-PDMS based cell separator

Robust Backdoor Detection for Deep Learning via Topological Evolution Dynamics

A backdoor attack in deep learning inserts a hidden backdoor in the model to trigger malicious behavior upon specific input patterns. Existing detection approaches assume a metric space (for either the original inputs or their latent representations) in which normal samples and malicious samples are separable. We show that this assumption has a severe limitation by introducing a novel SSDT (Source-Specific and Dynamic-Triggers) backdoor, which obscures the difference between normal samples and malicious samples. To overcome this limitation, we move beyond looking for a perfect metric space that would work for different deep-learning models, and instead resort to more robust topological constructs. We propose TED (Topological Evolution Dynamics) as a model-agnostic basis for robust backdoor detection. The main idea of TED is to view a deep-learning model as a dynamical system that evolves inputs to outputs. In such a dynamical system, a benign input follows a natural evolution trajectory similar to other benign inputs. In contrast, a malicious sample displays a distinct trajectory, since it starts close to benign samples but eventually shifts towards the neighborhood of attacker-specified target samples to activate the backdoor. Extensive evaluations are conducted on vision and natural language datasets across different network architectures. The results demonstrate that TED not only achieves a high detection rate, but also significantly outperforms existing state-of-the-art detection approaches, particularly in addressing the sophisticated SSDT attack. The code to reproduce the results is made public on GitHub.Comment: 18 pages. To appear in IEEE Symposium on Security and Privacy 202

Characterization of ultra-deeply buried middle Triassic Leikoupo marine carbonate petroleum system (!) in the Western Sichuan depression, China

Ultra-deeply buried (>5000 m) marine carbonate reservoirs have gradually become important exploration targets. This research focuses on providing an understanding of the basic elements of the ultra-deeply buried Middle Triassic Leikoupo marine carbonate petroleum system within the Western Sichuan Depression, China. Comprehensive analyses of organic geochemistry, natural gas, and C–H–He–Ne–Ar isotope compositions suggest that the reservoir is charged with compound gases from four source rock units including the Permian Longtan, Middle Triassic Leikoupo, Late Triassic Maantang and Xiaotangzi formations. Approximately a 50-m thick outcrop and 100-m length of drilling cores were examined in detail, and 108 samples were collected from six different exploration wells in order to conduct petrographic and petrophysical analyses. Thin-section and scanning electron microscope (SEM) observations, helium porosity and permeability measurements, mercury injection capillary pressure (MICP) analysis, and wire-line logging (5,500–6,900 m) indicate that the reservoir lithologies include argillaceous algal limestones, dolograinstones, crystalline dolostones, and microbially-derived stromatolitic and thrombolitic dolostones. Reservoir properties exhibit extreme heterogeneity due to different paleogeographic environmental controls and mutual interactions between constructive (e.g., epigenetic paleo-karstification, burial dissolution, structural movement, pressure-solution and dolomitization) and destructive (e.g., physical/chemical compaction, cementation, infilling, recrystallization, and replacement) diagenetic processes. An unconformity-related epigenetic karstification zone was identified in the uppermost fourth member of the Leikoupo Formation, which has developed secondary solution-enhanced pores, vugs, and holes that resulted in higher porosity (1.8–14.2%) and permeability (0.2–7.7 mD). The homogeneity and tightness of the reservoir increases with depth below the unconformity, and it is characterized by primary intergranular and intracrystalline pores, solution pores, fractures, stylolites, and micropores with a lower helium porosity (0.6–4.1%) and permeability (0.003–125.2 mD). Regional seals consist of the Late Triassic Xujiahe Formation, comprised of ~300 m of mudstones that are overlain by ~5,000-m thick of Jurassic to Quaternary continental argillaceous overburden rocks. Effective traps are dominated by a combination of structural-stratigraphic types. Paleo- reservoir crude oil cracking, wet-gases, and dry-gases from three successive hydrocarbon generation processes supplied the sufficient hydrocarbon resources. The homogenization temperatures of the hydrocarbon-associated aqueous fluid inclusions range from 98–130 °C and 130–171 °C, which suggests hydrocarbon charging occurred between 220–170 Ma and 130–90 Ma, respectively. One-dimensional basin evolution models combined with structural geologic and seismic profiles across wells PZ1-XQS1-CK1-XCS1-TS1 show that hydrocarbon migration and entrapment mainly occurred via the unconformity and interconnected fault-fracture networks with migration and charging driven by formation overpressure, abnormal fluid flow pressure, and buoyancy forces during the Indosinian and Yanshanian orogenies, with experiencing additional transformation occurring during the Himalayan orogeny. The predicted estimated reserves reached ~300 × 109 m3. The results provide excellent scientific implications for similar sedimentary basin studies, it is believed that abundant analogous deeply buried marine carbonate hydrocarbon resources yet to be discovered in China and elsewhere worldwide in the near future

Risk and Protective Factors for the Mental Wellbeing of Deployed Healthcare Workers During the COVID-19 Pandemic in China: A Qualitative Study.

Background: Though many literatures documented burnout and occupational hazard among healthcare workers and frontliners during pandemic, not many adopted a systemic approach to look at the resilience among this population. Another under-studied population was the large numbers of global healthcare workers who have been deployed to tackle the crisis of COVID-19 pandemic in the less resourceful regions. We investigated both the mental wellbeing risk and protective factors of a deployed healthcare workers (DHWs) team in Wuhan, the epicenter of the virus outbreak during 2020. Method: A consensual qualitative research approach was adopted with 25 DHWs from H province through semi-structured interviews after 3 months of deployment period. Results: Inductive-Deductive thematic coding with self-reflexivity revealed multi-layered risk and protective factors for DHWs at the COVID-19 frontline. Intensive working schedule and high-risk environment, compounded by unfamiliar work setting and colleagues; local culture adaptation; isolation from usual social circle, strained the DHWs. Meanwhile, reciprocal relationships and "familial relatedness" with patients and colleagues; organizational support to the DHWs and their immediate families back home, formed crucial wellbeing resources in sustaining the DHWs. The dynamic and dialectical relationships between risk and protective factors embedded in multiple layers of relational contexts could be mapped into a socio-ecological framework. Conclusion: Our multidisciplinary study highlights the unique social connectedness between patient-DHWs; within DHWs team; between deploying hospital and DHWs; and between DHWs and the local partners. We recommend five organizational strategies as mental health promotion and capacity building for DHWs to build a resilient network and prevent burnout at the disaster frontline

Metal-free photo-induced sulfidation of aryl iodide and other chalcogenation

A photo-induced C-S radical cross-coupling of aryl iodides and disulfides under transition-metal and external photosensitizer free conditions for the synthesis of aryl sulfides at room temperature has been presented, which features mild reaction conditions, broad substrate scope, high efficiency, and good functional group compatibility. The developed methodology could be readily applied to forge C-S bond in the field of pharmaceutical and material science

Alterations in brain structure and function associated with pediatric growth hormone deficiency: A multi-modal magnetic resonance imaging study

IntroductionPediatric growth hormone deficiency (GHD) is a disease resulting from impaired growth hormone/insulin-like growth factor-1 (IGF-1) axis but the effects of GHD on children’s cognitive function, brain structure and brain function were not yet fully illustrated.MethodsFull Wechsler Intelligence Scales for Children, structural imaging, diffusion tensor imaging, and resting-state functional magnetic resonance imaging were assessed in 11 children with GHD and 10 matched healthy controls.Results(1) The GHD group showed moderate cognitive impairment, and a positive correlation existed between IGF-1 levels and cognitive indices. (2) Mean diffusivity was significantly increased in both corticospinal tracts in GHD group. (3) There were significant positive correlations between IGF-1 levels and volume metrics of left thalamus, left pallidum and right putamen but a negative correlation between IGF-1 levels and cortical thickness of the occipital lobe. And IGF-1 levels negatively correlated with fractional anisotropy in the superior longitudinal fasciculus and right corticospinal tract. (4) Regional homogeneity (ReHo) in the left hippocampus/parahippocampal gyrus was negatively correlated with IGF-1 levels; the amplitude of low-frequency fluctuation (ALFF) and ReHo in the paracentral lobe, postcentral gyrus and precentral gyrus were also negatively correlated with IGF-1 levels, in which region ALFF fully mediates the effect of IGF-1 on working memory index.ConclusionMultiple subcortical, cortical structures, and regional neural activities might be influenced by serum IGF-1 levels. Thereinto, ALFF in the paracentral lobe, postcentral gyrus and precentral gyrus fully mediates the effect of IGF-1 on the working memory index