Avaliação qualitativa em modelo experimental fotoelástico do sistema de força gerado pela mola "T" centralizada com pré-ativações preconizadas por Burstone Qualitative evaluation in photoelastic experimental models of the force system generated by T-springs placed in the center of the interbracket space with pre-activations advocated by Burstone

OBJETIVO: avaliar o sistema de forças gerado pela mola T centralizada no espaço interbraquete, com pré-ativação preconizada por Burstone. MÉTODOS: utilizando-se modelos fotoelásticos, a mola T com pré-ativações preconizadas por Burstone, confeccionada com fio retangular de titânio-molibdênio (TMA) de secção 0,017"x 0,025", centralizada e com ativação de 6mm, 3mm e em posição neutra. Para melhor confiabilidade dos resultados, os testes foram repetidos em três modelos igualmente duplicados e confeccionados pelo mesmo operador. Utilizou-se uma distância interbraquetes de 27mm. Para compreensão dos resultados, as franjas foram visualizadas através do polariscópio, fotografadas e analisadas qualitativamente. RESULTADOS: por meio da análise qualitativa da ordem de franjas no modelo fotoelástico, notou-se que, nas extremidades de retração e ancoragem, ambas apresentaram simetria no sistema de força, em toda extensão radicular.OBJECTIVE: To evaluate the force system generated by T-springs placed in the center of the interbracket space using the pre-activations advocated by Burstone. METHODS: Photoelastic models were used to assess T-springs fabricated with 0.017x0.025-in rectangular titanium-molybdenum alloy wire (TMA), centrally positioned, with 6.0 mm activation, 3 mm activation, and in neutral position. To ensure reliable results, tests were repeated on three photoelastic models equally duplicated and fabricated by the same operator. An interbracket distance of 27.0 mm was used. For a better understanding of the results, the fringes were viewed in a polariscope, then photographed and qualitatively analyzed. RESULTS: Through qualitative analysis of the fringe order in the photoelastic model it was noted that both the retraction and anchorage ends displayed force system symmetry across the full extent of the root

Scientific use of the finite element method in Orthodontics

INTRODUCTION: The finite element method (FEM) is an engineering resource applied to calculate the stress and deformation of complex structures, and has been widely used in orthodontic research. With the advantage of being a non-invasive and accurate method that provides quantitative and detailed data on the physiological reactions possible to occur in tissues, applying the FEM can anticipate the visualization of these tissue responses through the observation of areas of stress created from applied orthodontic mechanics. OBJECTIVE: This article aims at reviewing and discussing the stages of the finite element method application and its applicability in Orthodontics. RESULTS: FEM is able to evaluate the stress distribution at the interface between periodontal ligament and alveolar bone, and the shifting trend in various types of tooth movement when using different types of orthodontic devices. Therefore, it is necessary to know specific software for this purpose. CONCLUSIONS: FEM is an important experimental method to answer questions about tooth movement, overcoming the disadvantages of other experimental methods.Introdução: o Método de Elementos Finitos (MEF) é um recurso da Engenharia empregado para calcular o estresse e a deformação de estruturas complexas, e tem sido amplamente utilizado nas pesquisas em Ortodontia. Apresenta a vantagem de ser um método não-invasivo e preciso, que fornece dados quantitativos e detalhados acerca das reações fisiológicas que podem ocorrer nos tecidos. Objetivo: esse artigo pretende realizar uma revisão da literatura sobre as etapas para realização do Método de Elementos Finitos, bem como de sua aplicabilidade na Ortodontia. Resultados: o MEF é capaz de avaliar a distribuição do estresse na interface entre o ligamento periodontal e o osso alveolar, bem como a tendência de deslocamento em diversos tipos de movimentos dentários, quando utilizados diferentes tipos de aparelhos. Para tanto, é necessário conhecimento de softwares específicos para esse fim. Conclusões: o MEF é um importante método experimental que pode esclarecer questionamentos acerca da movimentação dentária, superando as desvantagens de outros métodos experimentais

Comparison surface characteristics and chemical composition of conventional metallic and Nickel-Free brackets

This study aims at comparing conventional and nickel-free metal bracket surface characteristics with elemental composition by scanning electron microscopy (SEM), using energy dispersive spectroscopy (EDS). The sample consisted of 40 lower incisor brackets divided into four groups: ABZ = conventional brackets, Kirium Abzil 3M® (n = 10); RL = conventional brackets, Roth Light Morelli® (n = 10); NF = nickel-free brackets, Nickel-Free Morelli® (n = 10); and RM = nickel-free brackets, Roth Max Morelli® (n = 10). Qualitative evaluation of the bracket surface was performed using SEM, whereby surface features were described and compared. The elemental composition was analyzed by EDS. According to surface analysis, groups ABZ and RL showed a homogeneous surface, with better finishing, whereas the surfaces in groups NF and RM were rougher. The chemical components with the highest percentage were Fe, Cr and C. Groups NF and MR showed no nickel in their composition. In conclusion, the bracket surface of the ABZ and RL groups was more homogeneous, with grooves and pores, whereas the surfaces in groups NF and RM showed numerous flaws, cracks, pores and grooves. The chemical composition analysis confirmed that the nickel-free brackets had no Ni in their composition, as confirmed by the manufacturer’s specifications, and were therefore safe to use in patients with a medical history of allergy to this metal.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES

Characterization of surface topography and chemical composition of mini-implants

Abstract Aim : To assess the surface topography and chemical composition of three brands of as-received mini-implants (SIN(r), Morelli(r), and Conexao(r)). Methods: Twelve mini-implants of each brand were analyzed by scanning electron microscopy and energy dispersive X-ray (EDX). Results: There was no significant differences among SIN(r), Morelli(r), and Conexao(r) mini-implants comparing their surface topography by visualization of SEM micrographs and analysis of scores. The EDX analysis showed statistically significant difference among them for the amount of Ti, Al and V. Miniimplants SIN(r)presented also N and O in their composition. Conclusions: In conclusion, the miniimplants Morelli(r), SIN(r) and Conexao(r) presented Ti as main component of the alloy. Remaining components, such as Al and V, were also observed in all the analyzed brands, with differences among them. Only SIN(r)mini-implants presented N and O. As far as surface topography is concerned, there are no differences among the three brands of mini-implants

Changes over time in canine retraction: An implant study

Introduction: The objective of this study was to analyze rates of canine movement over the first 2 months of continuous retraction, when rate changes are expected. Methods: Ten patients with bone markers placed in the maxilla and the mandible had their canines retracted over a 2-month period. Retraction was accomplished with beta-titanium alloy T-loop springs. Standardized 45 oblique cephalograms where taken initially and every 28 days thereafter. The radiographs were scanned and digitized twice (the average was used for the analyses). The radiographs were superimposed by using the bone markers and oriented on the functional occlusal plane. Paired t tests were used to compare side and jaw effects. Results: There were no significant differences between sides. The maxillary cusp was retracted 3.2 mm, with less movement during the first (1.1 mm) than during the second 4 weeks (2.1 mm). The maxillary apices did not move horizontally. There were no significant vertical movements in the cusps and apices of the maxillary canines. The mandibular cusp was retracted 3.8 mm-1.1 mm during the first and 2.7 mm during the second 4 weeks. The mandibular apices were protracted 1.1 mm. The cusps and apices were intruded 0.6 and 0.7 mm, respectively. The only difference between jaws was the greater protraction of the mandibular apices during the second 4 weeks and in overall movement. Conclusions: The rate of canine cusp retraction was greater during the second than the first 4 weeks. The mandibular canines were retracted by uncontrolled tipping whereas the maxillary canines were retracted by controlled tipping. (Am J Orthod Dentofacial Orthop 2009;136:87-93

Utilização da distração osteogênica mediana sagital para tratamento da atresia mandibular Mid-sagital mandibular distraction osteogenesis for treatment of lower arch crowding

OBJETIVO: relatar o tratamento de uma paciente com apinhamento severo decorrente de uma atresia maxilomandibular, tratada por meio da Distração Osteogênica da Sínfise Mandibular (DOSM). RESULTADOS: neste caso, observamos bom engrenamento dentário, diminuição do corredor bucal escuro, correção do apinhamento, boa forma de arcos e boa estética facial, num período de tempo bastante satisfatório, sem trazer dano ao tecido periodontal adjacente. CONCLUSÃO: pacientes com arcos atrésicos e apinhamento dentário podem ser beneficiados com a DOSM que, quando bem indicada, surge como uma nova forma de tratamento para casos limítrofes de apinhamento dentário, nos quais as alternativas convencionais oferecem limitações, tais como o achatamento do perfil facial, o aumento do corredor bucal e a instabilidade.<br>OBJECTIVE: To report the treatment of a patient with severe dental crowding resulting from a maxillary mandibular atresia, treated by the osteogenic extraction of the mandible symphysis (DOSM). RESULTS: In this case there was good dental engagement, a reduction of the dark oral aisle, a correction of the crowding, good dental arch form and good facial esthetics, in a very satisfactory period of time without causing damage to the adjacent periodontal tissues. CONCLUSION: Patients with atresia arches and dental crowding can be benefited by a DOSM that when well indicated, appears as a new form of treatment in cases of maximum borderline dental crowding, in which the conventional alternatives have limitations such as flattening of the facial profile, increase in the oral aisle and instability