60 research outputs found

    Excitation power and temperature dependence of excitons in CuInSe2

    Get PDF
    Excitonic recombination processes in high quality CuInSe2 single crystals have been studied by photoluminescence (PL) and reflectance spectroscopy as a function of excitation powers and temperature. Excitation power dependent measurements confirm the identification of well-resolved A and B free excitons in the PL spectra and analysis of the temperature quenching of these lines provides values for activation energies. These are found to vary from sample to sample, with values of 12.5 and 18.4meV for the A and B excitons, respectively, in the one showing the highest quality spectra. Analysis of the temperature and power dependent PL spectra from the bound excitonic lines, labelled M1, M2, and M3 appearing in multiplets points to a likely assignment of the hole involved in each case. The M1 excitons appear to involve a conduction band electron and a hole from the B valence band hole. In contrast, an A valence band hole appears to be involved for the M2 and M3 excitons. In addition, the M1 exciton multiplet seems to be due to the radiative recombination of excitons bound to shallow hydrogenic defects, whereas the excitons involved in M2 and M3 are bound to more complex defects. In contrast to the M1 exciton multiplet, the excitonic lines of M2 and M3 saturate at high excitation powers suggesting that the concentration of the defects involved is low. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4709448

    Diamagnetic shift of the A free exciton in CuGaSe2 single crystals

    Get PDF
    Single crystals of CuGaSe2 were studied using magnetophotoluminescence inmagnetic fields up to 20 T at 4.2 K. The rate of the diamagnetic shift in the A free exciton peak was determined to be 9.82 x 10(-6) eV/T-2. This rate was used to calculate the reduced mass as 0.115m(0), the binding energy as 12.9 meV, the Bohr radius as 5.1 nm and an effective hole mass of 0.64m(0) (m(0) is the free electron mass) of the free A exciton using a low-field perturbation approach and the hydrogenic model

    Excited states of the free excitons in CuInSe2 single crystals

    Get PDF
    High-quality CuInSe2 single crystals were studied using polarization resolved photoluminescence (PL) and magnetophotoluminescence (MPL). The emission lines related to the first (n=2) excited states for the A and B free excitons were observed in the PL and MPL spectra at 1.0481 meV and 1.0516 meV, respectively. The spectral positions of these lines were used to estimate accurate values for the A and B exciton binding energies (8.5 meV and 8.4 meV, respectively), Bohr radii (7.5 nm), band gaps (E-g(A)=1.050 eV and E-g(B)=1.054 eV), and the static dielectric constant (11.3) assuming the hydrogenic model

    Zinc-blende and wurtzite AlxGa1-xN bulk crystals grown by molecular beam epitaxy

    Get PDF
    There is a significant difference in the lattice parameters of GaN and AlN and for many device applications AlxGa1-xN substrates would be preferable to either GaN or AlN. We have studied the growth of free-standing zinc-blende and wurtzite AlxGa1-xN bulk crystals by plasma-assisted molecular beam epitaxy (PA-MBE). Thick (similar to 10 mu m) zinc-blende and wurtzite AlxGa1-xN films were grown by PA-MBE on 2-in. GaAs (0 0 1) and GaAs (1 1 1)B substrates respectively and were removed from the GaAs substrate after the growth. We demonstrate that free-standing zinc-blende and wurtzite AlxGa1-xN wafers can be achieved by PA-MBE for a wide range of Al compositions. (C) 2011 Elsevier B.V. All rights reserved

    Optical properties of high quality Cu2ZnSnSe4 thin films

    Get PDF
    Cu2ZnSnSe4 thin films, fabricated on bare or molybdenum coated glass substrates by magnetron sputtering and selenisation, were studied by a range of techniques. Photoluminescence spectra reveal an excitonic peak and two phonon replicas of a donor-acceptor pair (DAP) recombination. Its acceptor and donor ionisation energies are 27 and 7 meV, respectively. This demonstrates that high-quality Cu2ZnSnSe4 thin films can be fabricated. An experimental value for the longitudinal optical phonon energy of 28 meV was estimated. The band gap energy of 1.01 eV at room temperature was determined using optical absorption spectr

    Hole-based memory operation in an InAs/GaAs quantum dot heterostructure

    Get PDF
    This article may be downloaded for personal use only. Any other use requires prior permission of the author and AIP Publishing. This article appeared in Appl. Phys. Lett. 95, 242114 (2009) and may be found at https://doi.org/10.1063/1.3275758.We present an InAs/GaAs quantum dot (QD) memory structure with all-electrical data access which uses holes as charge carriers. Charging and discharging of the QDs are clearly controlled by a gate voltage. The stored information is read-out by a two-dimensional hole gas underneath the QD-layer. Time resolved drain-current-measurements demonstrate the memory operation. Present write times are 80 ns

    Carrier localization and related photoluminescence in cubic AlGaN epilayers

    Get PDF
    The steady state and time-resolved photoluminescence (PL) spectra of cubic AlxGa1-xN have been measured for 0 < x < 1. The intensity of the room temperature PL increases by an order of magnitude when the AlN content increases from x = 0 to x = 0.95. Additionally, the PL decay slows down with the decrease of temperature and increase of x. These results show that strong localization of carriers on alloy composition fluctuations plays a large role in determining the intensity and temporal evolution of the PL. The activation energy for the localized carriers increases with the increase of x and reaches the value of 55 meV at x = 0.95

    Propaganda in an Age of Algorithmic Personalization: Expanding Literacy Research and Practice

    Get PDF
    In this commentary, the author considers the rise of algorithmic personalization and the power of propaganda as they shift the dynamic landscape of 21st‐century literacy research and practice. Algorithmic personalization uses data from the behaviors, beliefs, interests, and emotions of the target audience to provide filtered digital content, targeted advertising, and differential product pricing to online users. As persuasive genres, advertising and propaganda may demand different types of reading practices than texts whose purpose is primarily informational or argumentative. Understanding the propaganda function of algorithmic personalization may lead to a deeper consideration of texts that activate emotion and tap into audience values for aesthetic, commercial, and political purposes. Increased attention to algorithmic personalization, propaganda, and persuasion in the context of K–12 literacy education may also help people cope with sponsored content, bots, and other forms of propaganda and persuasion that now circulate online
    corecore