34 research outputs found
Effect of calcium phosphate addition on sintering of El-Oued sand quartz raw materials
Re-examination of the structural properties of solid solutions SrxCa1-xCO3
Materials Research, 2007, 42(6), 1061-106
Statistical experimental design for studies of porosity and compressive strength in composite materials applied as biomaterials
Composites studied in this work are the associations of aluminosilicates and
13% of calcium phosphates. These composites present great interest. They
are destined to be applied in biomedical field, particularly in orthopedic
or jawbone surgery. Calcium phosphates are composed of HA (hydroxyapatite)
and TCP (tricalcic phosphate). The success of synthesised bony biomaterials
depends on two determinant factors: the porosity (which facilitate the cells
deposition and the vascularisation) and the compressive strength (which
permits the support of body charge). In this way, a statistical experimental
design was employed to quantify the influence of these two synthesis
parameters. It concerns the effect of the K2O/SiO2Â molecular ratio
(X1) and the effect of the calcium phosphate (HA/TCP) weight %
(X2). The K2O/SiO2Â molecular ratio characterises the
synthesis of the aluminosilicate. It varies between two limit levels: the
stoichiometric ratio K2O/SiO2 = 0.54 corresponding to:
and the ratio K2O/SiO2 = 0.80 corresponding to . In
bony biomaterials field, various calcium phosphates are commonly used as
biomaterials. In our previous works, the influence of the commercial
hydroxyapatite HA and tri-calcium phosphate TCP (13 wt%) addition was
investigated. To study the effect of calcium phosphate composition, the
weight percentage of mixing HA and TCP varied between two levels: the
composite aluminosilicate with 13Â wt% of HA () and the
composite aluminosilicate with 13Â wt% of TCP (). Eight samples
were studied. The statistical experimental design predicted answer surfaces
for compressive strength and percentage of porosity. After the validation of
models, it was possible to determine composite which presents best
compromise between percentage of porosity and compressive strength. This
composite will be evaluated by âin-vitroâ and âin-vivoâ studies to
investigate its potential for forthcoming applied as biomaterial
âIn vitroâ bioactivity of melt-derived glass 46S6 doped with magnesium
Journal of Biomedical Materials Research Part A (JBMR-A), 2008, 4, 1087 â 109
Calcification mechanism and bony bonding studies of CaCO3 and composite aluminosilicate calcium phosphate applied as biomaterials by using radioactivation methods
J. Radioanalytical and Nucl Chem., 2007, 274, n° 2, 421-42
MAS-NMR studies of geopolymer heat-treated for applications in biomaterials field
Journal of Materials Science (J. Mat. Sci)., 2007, 42, 3092-309
Comparison of the bony remodelling of two synthetic biomaterials: aragonite 55% and aragonite 55% with active substance
Biomed. Mater., 2007, 2, 65-7
Thermal behaviour of composites aluminosilicate-calcium phosphates
International audienceA new type of aluminosilicate matrix calcium phosphate crystallites composites (ACPC) was synthesized and studied for osseous bone applications. The room temperature synthesis of the aluminosilicate matrix and composites was described. Thermal treatments of compounds allowed the adaptability of some parameters (pH, porosity and mechanical properties). Structure of heat treated composites were characterized by XRD and FTIR. The influence of thermal treatment on the mechanical properties, the porosity and the pH was studied for two temperatures (250 and 500degreesC). Results evidenced the ability to control the pH, the high level of porosity (approximate to70%) and the good mechanical properties, allowing to consider that ACPC are potential biomaterials for osseous bone application
A synthetic aragonite-based bioceramic: influence of process parameters on porosity and compressive strength
International audienceWe investigate the influence of process parameters such as weight fraction and particle size of pore-former, and isostatic pressure, on porosity and compressive strength of non-sintered porous calcium carbonate biomaterials compacted at high pressure in uniaxial or isostatic mode. Experiment design and results analysis are performed according to a two-level 2(k) factorial design method (FDM). Results indicate that only the weight fraction of pore-former (wt fpf) influences significantly the porosity and the compressive strength. The porosity P, is described by a linear function of wt fpf, and the compressive strength sigma (comp), by, an exponential one. For materials compacted tinder Uniaxial pressing: P (vol%) = 33.7 + 85.4 (wt fpf) and sigma (comp) (MPa) = 28.8 e(-9.2(wt) (fpf)) with 0.1 less than or equal to wt fpf less than or equal to 0.3. For materials compacted in isostatic mode: P (vol%) = 33.9 + 82.1 (wt fpf) and sigma (comp) (MPa) = 24.0 e(-7.0(wt) (fpf)) with 0.15 less than or equal to wt fpf less than or equal to 0.35, The pore-former particle size has no significant influence on both properties. The increase in isostatic pressure provides slightly lower porosity and better compressive strength. For a fixed fraction of pore-former, isostatic pressing leads to a better compressive strength than uniaxial pressing. This study indicates that, for a constant amount of pore former, the size of macropores can be adjusted to reach optimal bone-ingrowth without change in compressive strength. (C) 2001 Elsevier Science Ltd. All rights reserved
Effects of Mg and Zn on the surface of doped melt-derived glass for biomaterials applications
Applied Surface Science, 2008, 255, 391 â 39