Bioinspired low-frequency material characterisation

New-coded signals, transmitted by high-sensitivity broadband transducers in the 40–200 kHz range, allow subwavelength material discrimination and thickness determination of polypropylene, polyvinylchloride, and brass samples. Frequency domain spectra enable simultaneous measurement of material properties including longitudinal sound velocity and the attenuation constant as well as thickness measurements. Laboratory test measurements agree well with model results, with sound velocity prediction errors of less than 1%, and thickness discrimination of at least wavelength/15. The resolution of these measurements has only been matched in the past through methods that utilise higher frequencies. The ability to obtain the same resolution using low frequencies has many advantages, particularly when dealing with highly attenuating materials. This approach differs significantly from past biomimetic approaches where actual or simulated animal signals have been used and consequently has the potential for application in a range of fields where both improved penetration and high resolution are required, such as nondestructive testing and evaluation, geophysics, and medical physics

Rapid non-contacting resistivity logging of core

We demonstrate a non-contact approach to whole-core and split-core resistivity measurements, imaging a 15 mm-thick, dipping, conductive layer, producing a continuous log of the whole core and enabling the development of a framework to allow representative plugs to be taken, for example. Applications include mapping subtle changes in grain fabric (e.g. grain shape) caused by variable sedimentation rates, for example, as well as the well-known dependencies on porosity and water saturation. The method operates at relatively low frequencies (i.e. low induction numbers), needing highly sensitive coil pairs to provide resistivity measurements at the desired resolution. A four-coil arrangement of two pairs of transmitter and receiver coils is used to stabilize the measurement. One ‘coil pair’ acts as a control, enabling the effects of local environmental variations, which can be considerable, to be removed from the measurement at source. Comparing our non-contact approach and independent traditional ‘galvanic’ resistivity measurements indicates that the non-contact measurements are directly proportional to the reciprocal of the sample resistivity (i.e. conductivity). The depth of investigation is discussed in terms of both theory and practical measurements, and the response of the technique to a variety of synthetic ‘structures’ is presented. We demonstrate the potential of the technique for rapid electrical imaging of core and present a whole-core image of a dipping layer with azimuthal discrimination at a resolution of the order of 10 mm. Consequently, the technique could be used to investigate different depths within the core, in agreement with theoretical predictions

Signals for Lorentz Violation in Electrodynamics

An investigation is performed of the Lorentz-violating electrodynamics extracted from the renormalizable sector of the general Lorentz- and CPT-violating standard-model extension. Among the unconventional properties of radiation arising from Lorentz violation is birefringence of the vacuum. Limits on the dispersion of light produced by galactic and extragalactic objects provide bounds of 3 x 10^{-16} on certain coefficients for Lorentz violation in the photon sector. The comparative spectral polarimetry of light from cosmologically distant sources yields stringent constraints of 2 x 10^{-32}. All remaining coefficients in the photon sector are measurable in high-sensitivity tests involving cavity-stabilized oscillators. Experimental configurations in Earth- and space-based laboratories are considered that involve optical or microwave cavities and that could be implemented using existing technology.Comment: 23 pages REVTe