High-impedence NbSi TES sensors for studying the cosmic microwave background radiation

Precise measurements of the cosmic microwave background (CMB) are crucial in cosmology, because any proposed model of the universe must account for the features of this radiation. Of all CMB measurements that the scientific community has not yet been able to perform, the CMB B-mode polarization is probably the most challenging from the instrumental point of view. The signature of primordial gravitational waves, which give rise to a B-type polarization, is one of the goals in cosmology today and amongst the first objectives in the field. For this purpose, high-performance low-temperature bolometric cameras, made of thousands of pixels, are currently being developed by many groups, which will improve the sensitivity to B-mode CMB polarization by one or two orders of magnitude compared to the Planck satellite HFI detectors. We present here a new bolometer structure that is able to increase the pixel sensitivities and to simplify the fabrication procedure. This innovative device replaces delicate membrane-based structures and eliminates the mediation of phonons: the incoming energy is directly captured and measured in the electron bath of an appropriate sensor and the thermal decoupling is achieved via the intrinsic electron-phonon decoupling of the sensor at very low temperature. Reported results come from a 204-pixel array of Nb$_{x}$Si$_{1-x}$ transition edge sensors with a meander structure fabricated on a 2-inch silicon wafer using electron-beam co-evaporation and a cleanroom lithography process. To validate the application of this device to CMB measurements, we have performed an optical calibration of our sample in the focal plane of a dilution cryostat test bench. We have demonstrated a light absorption close to 20% and an NEP of about 7$\times10^{-16}$ W/$\sqrt{Hz}$, which is highly encouraging given the scope for improvement in this type of detectors.Comment: 6 pages, 10 figures. arXiv admin note: text overlap with arXiv:1005.0555 by other author

Are stress and mixed urinary incontinence associated with impaired executive control in community-dwelling older women?

Objectives: To assess whether stress or mixed urinary incontinence (UI) is associated with deficits in executive functioning among community-dwelling women. Design: An observational study comparing the performance, using multivariate analyses of variance (MANOVAs) and Bonferroni post hoc test, of continent women and women with stress or mixed UI during executive control tasks. Setting: The research center of the Institut universitaire de gériatrie de Montréal. Participants: One hundred and fifty-five community-dwelling women aged 60 and older participated in the study. Measurements: Based on the Urogenital Distress Inventory (UDI), participants were split into three groups: 35 continent women, 43 women with stress UI, and 78 women with mixed UI. Participants completed a battery of neuropsychological tests and a computerized dual-task test. Results: Women with mixed UI showed poorer performances than continent and stress UI women in executive control functions. Deficits were specific to tests involving switching and sharing/dividing attention between two tasks. Conclusion: Results of this study suggest that mixed UI can be associated with executive control deficits in community-dwelling older women. Future intervention studies in the treatment of UI should take the higher risk of an executive control deficit in women with UI under consideration

Tunable Superconducting Properties of a-NbSi Thin Films and Application to Detection in Astrophysics

We report on the superconducting properties of amorphous NbxSi1-x thin films. The normal-state resistance and critical temperatures can be separately adjusted to suit the desired application. Notably, the relatively low electron-phonon coupling of these films makes them good candidates for an "all electron bolometer" for Cosmological Microwave Background radiation detection. Moreover, this device can be made to suit both high and low impedance readouts

Spontaneous voltage peaks in superconducting Nb channels without engineered asymmetry

Rectification effects in solid-state devices are a consequence of nonreciprocal transport properties. This phenomenon is usually observed in systems with broken inversion symmetry. In most instances, nonreciprocal transport arises in the presence of an applied magnetic field and the rectified signal has an antisymmetric dependence on the field. We have observed rectification of environmental electromagnetic fluctuations in plain Nb channels without any asymmetry in design, leading to spontaneous voltage peaks at the superconducting transition. The signal is symmetric in the magnetic field and appears even without an applied field at the critical temperature. This is indicative of an unconventional mechanism of nonreciprocal transport resulting from a spontaneous breaking of inversion symmetry

Active Thermal Shearography and Infrared Thermography Applied to NDT of Reinforced Concrete Structure by Glued CFRP

International audienceThis research paper presents the study of thermography and shearography to evaluate CFRP reinforcement of concrete structures. The study explores the strengths and weaknesses of both non-destructive-testing (NDT) methods. It will be shown that by coupling the methods, the detection is more reliable and the defect evaluation more thorough as both the thermal and thermo mechanical properties are tested. Once the core theoretical concept regarding both methods is presented, the viability is demonstrated in the experimentation part of this study. With the experimental results confirming the feasibility of the coupling of both methods, the numerical model conceived allow to better conduct analysis that are not otherwise possible with the experimental results

Instrumentation by accelerometers and distributed optical fiber sensors of a real ballastless track structure

International audienceWhile relatively expensive to build, ballastless track structures are presently seen as an attractive alternative to conventional ballast. Firstly, they are built quickly since the slabs can be cast in place in an automated fashion by a slipform paver. Secondly, with its service life of at least 60 years, they requires little maintenance and hence they offers great availability. Other reasons for using ballastless tracks instead of ballasted tracks are the lack of suitable ballast material and the need of less noise and vibration for high-speed, in particularly. In the framework of a FUI project (n • 072906053), a new ballastless track structure based on concrete slabs was designed and its thermal-mechanical behavior in fatigue under selected mechanical and thermal conditions was tested on a real scale mockup in our laboratory [1,2]. By applying to the slabs both together mechanical stresses and thermal gradients, finite elements simulation and experimental results show that the weather conditions influence significantly the concrete slabs curvatures and by the way, the contact conditions with the underlaying layers. So it is absolutely necessary to take into account this effect in the design of the ballastless track structures in order to guarantee a long target life of at least of 50 years. After design and experimental tests in laboratory, a real ballastless track structure of 1km was built in France at the beginning of year 2013. This structure has 2 tracks on which several trains circulate every day since the beginning of year 2014. Before the construction, it was decided to monitor this structure to verify that the mechanical behavior is conform to the simulations. One part of the instrumentation is dedicated to monitor quasi-continuously the evolution of the curvature of a concrete slab. For this, 2 accelerometers were fixed on the slab under the track. One was placed on the edge and the other in the middle of the slab. The acquisition of the signals by a nano computer (called Pegase and developed at Ifsttar for data acquisition [3]) were performed automatically every time that a threshold is exceeded due to the passage of a train. These data are then send to a web server via a 3G Wireless Network. Many data was thus stored daily for several months. Moreover, several thermocouples were embedded at different depths in order to measure thermal gradients into the track slab