The influence of engine demand map design on vehicle perceived performance

This paper reports a study into the influence of the steady state engine demand map on perceived performance. Analysis of the results of a survey of 24 C and C/D class 1600cc cars is presented and shows that the primary parameters are mean wide-open throttle acceleration, throttle progression, and part-throttle rate of change of acceleration with engine speed. These results are used to design a factorial experiment to investigate these parameters using an electronic throttle system. This approach eliminates problems of inter-vehicle variations in noise, comfort or general image, allowing subjective ratings to be attributed directly to the demand map changes. The results are discussed in terms of the significant main effects and interactions and as response surfaces, from which optimum setups can be determined

A Computational Comparison of Optimization Methods for the Golomb Ruler Problem

The Golomb ruler problem is defined as follows: Given a positive integer n, locate n marks on a ruler such that the distance between any two distinct pair of marks are different from each other and the total length of the ruler is minimized. The Golomb ruler problem has applications in information theory, astronomy and communications, and it can be seen as a challenge for combinatorial optimization algorithms. Although constructing high quality rulers is well-studied, proving optimality is a far more challenging task. In this paper, we provide a computational comparison of different optimization paradigms, each using a different model (linear integer, constraint programming and quadratic integer) to certify that a given Golomb ruler is optimal. We propose several enhancements to improve the computational performance of each method by exploring bound tightening, valid inequalities, cutting planes and branching strategies. We conclude that a certain quadratic integer programming model solved through a Benders decomposition and strengthened by two types of valid inequalities performs the best in terms of solution time for small-sized Golomb ruler problem instances. On the other hand, a constraint programming model improved by range reduction and a particular branching strategy could have more potential to solve larger size instances due to its promising parallelization features

The value of community based performing arts organisations for young people

This study funded by the Arts and Humanities Research Council took place in six community-based organisations in four contrasting localities in different geographical areas. A total of 258 interviews were conducted with168 young people aged between 16 and 25 years old who were participating in a range of different art forms including drama, music production, dance and slam poetry. Of these young people, 96 were young men and 72 young women, 50% were White British, 25% Black African, Black British and Black Caribbean, 14% Dual Heritage, and other young people were Asian, South American, and Middle Eastern. Participation in the research was voluntary and all young people received vouchers. Tutors, managers and policy makers in the local areas and some national organisations were interviewed to gain a better understanding of the activities provided and how policies were working in practice

Effect of shot peening on the residual stress and mechanical behaviour of low-temperature and high-temperature annealed martensitic gear steel 18CrNiMo7-6

A martensitic gear steel (18CrNiMo7-6) was annealed at 180 \ub0C for 2h and at ∼ 750 \ub0C for 1h to design two different starting microstructures for shot peening. One maintains the original as-transformed martensite while the other contains irregular-shaped sorbite together with ferrite. These two materials were shot peened using two different peening conditions. The softer sorbite + ferrite microstructure was shot peened using 0.6 mm conditioned cut steel shots at an average speed of 25 m/s in a conventional shot peening machine, while the harder tempered martensite steel was shot peened using 1.5 mm steel shots at a speed of 50 m/s in an in-house developed shot peening machine. The shot speeds in the conventional shot peening machine were measured using an in-house lidar set-up. The microstructure of each sample was characterized by optical and scanning electron microscopy, and the mechanical properties examined by microhardness and tensile testing. The residual stresses were measured using an Xstress 3000 G2R diffractometer equipped with a Cr Kα x-ray source. The correspondence between the residual stress profile and the gradient structure produced by shot peening, and the relationship between the microstructure and strength, are analyzed and discussed

Materials on the International Space Station - Forward Technology Solar Cell Experiment

This paper describes a space solar cell experiment currently being built by the Naval Research Laboratory (NRL) in collaboration with NASA Glenn Research Center (GRC), and the US Naval Academy (USNA). The experiment has been named the Forward Technology Solar Cell Experiment (FTSCE), and the purpose is to rapidly put current and future generation space solar cells on orbit and provide validation data for these technologies. The FTSCE is being fielded in response to recent on-orbit and ground test anomalies associated with space solar arrays that have raised concern over the survivability of new solar technologies in the space environment and the validity of present ground test protocols. The FTSCE is being built as part of the Fifth Materials on the International Space Station (MISSE) Experiment (MISSE-5), which is a NASA program to characterize the performance of new prospective spacecraft materials when subjected to the synergistic effects of the space environment. Telemetry, command, control, and communication (TNC) for the FTSCE will be achieved through the Amateur Satellite Service using the PCSat2 system, which is an Amateur Radio system designed and built by the USNA. In addition to providing an off-the-shelf solution for FTSCE TNC, PCSat2 will provide a communications node for the Amateur Radio satellite system. The FTSCE and PCSat2 will be housed within the passive experiment container (PEC), which is an approximately 2ft x2ft x 4in metal container built by NASA Langley Research Center (NASA LaRC) as part of the MISSE-5 program. NASA LaRC has also supplied a thin film materials experiment that will fly on the exterior of the thermal blanket covering the PCSat2. The PEC is planned to be transported to the ISS on a Shuttle flight. The PEC will be mounted on the exterior of the ISS by an astronaut during an extravehicular activity (EVA). After nominally one year, the PEC will be retrieved and returned to Earth. At the time of writing this paper, the subsystems of the experiment are being integrated at NRL, and we are preparing to commence environmental testing

Antibiotic therapy of neuroborreliosis:A survey among infectious disease specialists and neurologists in Norway, Sweden, and Denmark

Introduction: Neuroborreliosis (NB) is a prevalent tick-borne neuroinfection in Europe. To delineate current practice in antimicrobial management of adults with NB and to prioritize future trials needed to optimize treatment recommendations, a questionnaire-based survey was performed. Methods: A self-administered Internet-based survey of NB treatment practices among specialists in infectious diseases and neurology based in Norway, Sweden, and Denmark was carried out between October 2021 and February 2022. The participants were also asked to prioritize four pre-defined research questions for randomized controlled trials (RCTs) on therapy for NB. Results: In total, 290 physicians (45% female) from Norway (30%), Sweden (40%), and Denmark (30%) participated in the survey. Of the responders, 230 (79%) were infectious disease specialists and 56 (19%) were neurologists. The preferred antibiotic treatment for patients with early NB was oral doxycycline (n = 225, 78%). Intravenous (IV) penicillin, ceftriaxone, or cefotaxime for the full treatment course was favored by 12%. A preferred treat- ment duration of 10–14 days for patients with NB was reported by 245 respondents (85%), most common among participants from Sweden (97%). A total of 170 (59%) responders reported having local hospital guidelines on the treatment of NB, most often with recommendation of oral doxycycline (92%) for 10–14 days (90%) as first line treatment. The prioritization score for future RCTs was highest for adjunctive prednisone therapy in NB patients with facial palsy (median 5; IQR 4–6) and for placebo versus repeated antibiotics in patients with persistent symptoms after completed antibiotic therapy for NB (median 5, IQR 3–6). Conclusion: In Sweden, all respondents preferred treating NB with oral doxycycline for 10–14 days, whereas 5% in Norway and 19% in Denmark still treat NB with IV antibiotics for the entire treatment course. RCTs to define the role of adjunctive prednisolone in NB patients with facial palsy and repeated antibiotics in patients with persistent symptoms are prioritized for future research.publishedVersio