119 research outputs found
CLIC e+e- Linear Collider Studies - Input to the Snowmass process 2013
This paper addresses the issues in question for Energy Frontier Lepton and
Gamma Colliders by the Frontier Capabilities group of the Snowmass 2013 process
and is structured accordingly. It will be accompanied by a paper describing the
Detector and Physics studies for the CLIC project currently in preparation for
submission to the Energy Frontier group.Comment: Submitted to the Snowmass process 2013. arXiv admin note: substantial
text overlap with arXiv:1208.140
CLIC e+e- Linear Collider Studies
This document provides input from the CLIC e+e- linear collider studies to
the update process of the European Strategy for Particle Physics. It is
submitted on behalf of the CLIC/CTF3 collaboration and the CLIC physics and
detector study. It describes the exploration of fundamental questions in
particle physics at the energy frontier with a future TeV-scale e+e- linear
collider based on the Compact Linear Collider (CLIC) two-beam acceleration
technique. A high-luminosity high-energy e+e- collider allows for the
exploration of Standard Model physics, such as precise measurements of the
Higgs, top and gauge sectors, as well as for a multitude of searches for New
Physics, either through direct discovery or indirectly, via high-precision
observables. Given the current state of knowledge, following the observation of
a \sim125 GeV Higgs-like particle at the LHC, and pending further LHC results
at 8 TeV and 14 TeV, a linear e+e- collider built and operated in
centre-of-mass energy stages from a few-hundred GeV up to a few TeV will be an
ideal physics exploration tool, complementing the LHC. Two example scenarios
are presented for a CLIC accelerator built in three main stages of 500 GeV, 1.4
(1.5) TeV, and 3 TeV, together with the layout and performance of the
experiments and accompanied by cost estimates. The resulting CLIC physics
potential and measurement precisions are illustrated through detector
simulations under realistic beam conditions.Comment: Submitted to the European Strategy Preparatory Grou
The Compact Linear Collider (CLIC) - 2018 Summary Report
The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear e+e- collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years
Transient Monte Carlo Simulations for the Optimisation and Characterisation of Monolithic Silicon Sensors
An ever-increasing demand for high-performance silicon sensors requires
complex sensor designs that are challenging to simulate and model. The
combination of electrostatic finite element simulations with a transient Monte
Carlo approach provides simultaneous access to precise sensor modelling and
high statistics. The high simulation statistics enable the inclusion of Landau
fluctuations and production of secondary particles, which offers a realistic
simulation scenario. The transient simulation approach is an important tool to
achieve an accurate time-resolved description of the sensor, which is crucial
in the face of novel detector prototypes with increasingly precise timing
capabilities. The simulated time resolution as a function of operating
parameters as well as the full transient pulse can be monitored and assessed,
which offers a new perspective on the optimisation and characterisation of
silicon sensors.
In this paper, a combination of electrostatic finite-element simulations
using 3D TCAD and transient Monte Carlo simulations with the Allpix Squared
framework are presented for a monolithic CMOS pixel sensor with a small
collection diode, that is characterised by a highly inhomogeneous, complex
electric field. The results are compared to transient 3D TCAD simulations that
offer a precise simulation of the transient behaviour but long computation
times. Additionally, the simulations are benchmarked against test-beam data and
good agreement is found for the performance parameters over a wide range of
different operation conditions
Kalman filter tracking and vertexing in a silicon detector for neutrino physics
This article describes the application of Kalman filter techniques for the tracking and vertexing of particles inside the NOMAD-STAR detector a silicon vertex detector installed in NOMAD, one of the neutrino oscillation experiments at the CERN-SPS. The use of the Kalman filter simplifies computationally the tracking and vertex procedure for NOMAD-STAR. The alignment of NOMAD-STAR is shown as an example of the application of the Kalman filter for tracking purposes. The accuracy of the method is such that one obtains alignment residuals between 9 and 12~m. Furthermore, a preliminary measure of the impact parameter (with an RMS m) illustrates the vertexing capabilities of this technique
An Experimental Area for Short Baseline Neutrino Physics on the CERN Neutrino Beam to Gran Sasso
A new neutrino beam line from the CERN SPS to the Gran Sasso laboratory in Italy is presently under study. The new neutrino beam will allow both long baseline and short baseline neutrino oscillation experiments to be performed. This report presents a conceptual design of the short baseline experimental area to be located at a distance of 1858 m from the neutrino target
Performance of Long Modules of Silicon Microstrip Detectors
This note describes the performance of modules assembled with up to twelve silicon microstrip detectors. These modules were built for the instrumented Silicon Target (STAR) that has been installed in the NOMAD spectrometer. Laboratory and test beam results are compared with model predictions. For a module of nine detectors, test beam results indicate a signal--to--noise ratio of 19, a hit finding efficiency of 99.8\% and a spatial resolution of 6.0 m. Laboratory measurements indicate that modules of twelve detectors exhibit a signal--to--noise ratio of the order of 16
Pion yield from 450 GeV/c protons on beryllium
This paper reports on the charged pion production yields measured by the SPY/NA56 experiment for 450 GeV/c proton interactions on beryllium targets. The present data cover a secondary momentum range from 7 GeV/c to 135 GeV/c in the forward direction. An experimental accuracy ranging from 5 to 10\%, depending on the beam momentum, has been achieved, limited mainly by the knowledge of the beam acceptance. These results will be relevant in the calculation of neutrino fluxes in present and future neutrino beams
- …