56 research outputs found
Design and demonstration of a thermoelectric-powered wireless sensor platform in window frames for the smart building envelope
No Abstract
Recommended from our members
Design and Analysis of Smart Building Envelope Materials and Systems
As the largest consumer of electricity, the buildings sector accounts for about 76% of electricity use and 40% of all U.S. primary energy use and associated greenhouse gas (GHG) emissions. Research shows that a potential energy saving of 34.78% could be achieved by the smart buildings comparing to conventional buildings. Therefore, a smart management of building sectors becomes significantly important to achieve the optimal interior comfort with minimal energy expenditure. The ability of adaptation to the dynamic environments is considered the central aspect in smart building systems, which can be segmented into the passive adaptation and the active adaptation. The passive adaptation refers to the designs that do not change with the dynamic environment but improve the building overall performance by the integration of originally separated components, or by the application of advanced engineering materials. The active adaptation refers to the building management system (BMS) that actively responds and evolves with the changing environment, through the continuous monitoring of the surroundings via the sensor network, and the smart response through the controlling algorithms in the central controlling unit.
This Ph.D. dissertation focuses on developing materials and systems for the smart building envelope, including a photovoltaic integrated roof with passive adaptation, and self-powered window systems with active responses environment. As the skin of a building, the building envelope provides the first level resistance towards air, water, heat, light and noise, which makes it the ideal target for the passive adaptation to the environments, as well as the perfect sensing location in the building management system for the active adaptation.
This dissertation starts with a discussion of the building integrated photovoltaic thermal (BIPVT) roofing panel, including the fabrication, performance demonstration, and micromechanics-based theoretical modeling. The panel is structurally supported by a functionally graded material (FGM) panel made with high-density polyethylene as the matrix and aluminum particles as reinforcement. It prevents the heat from entering the building and directs the heat to the water tubes embedded inside the panel for the thermal energy harvesting, such that the overall energy efficiency is significantly improved. The design, fabrication and performance of the system is discussed, and an innovative non-destructive analysis method is developed to captures the authentic particle distribution of the FGM.
As the main structural component, functionally graded material is comprehensively tested and modeled in elastic, thermoelastic, elastoplastic, and thermo-elastoplastic performance, based on the equivalent inclusion based method. An ensemble average approach was used to convert the particles’ interaction in the microscope to the averaged relation in the macroscope, such that both particle to matrix influence and particle to particle pair-wise interactions are characterized. The idea of the equivalent inclusion method extends to the plastic modeling of the FGM, by formulating an ensemble average form of the matrix stress norm in the macroscale that incorporate the local disturbance of particle reinforcement in the microscale. The accuracy of the proposed algorithm is verified and validated by comparing with another theory in homogeneous composite and experiments, respectively. To the best of the author’s knowledge, no prior theoretical algorithm has been proposed for the elastoplastic modeling of functionally graded materials. Therefore, the proposed algorithm can be used as a foundation and reference for further investigation and industry prediction of graded composites.
Based on the theoretical modeling of the mechanical properties, a high order plate theory is also proposed in this dissertation to study for the thermo-mechanical performance of the FGM panel, to provide structural design guideline for the BIPVT panels. The shearing and bending behaviors are decomposed, solved independently, and combined to formulate the final solution. The shear strain components are assumed to follow a parabolic variation across the thickness, while the bending components follow the solution from classical plate theory. Closed-form solutions for the circular panel under different loadings are provided, with verification by comparing to other models and validation to experiments.
Two smart window systems are proposed and demonstrated in this dissertation to actively monitor the building environment with active responses, and energy harvesting techniques are investigated to harvest energy from ambient environment the eternal power supply to the system. The thermoelectric powered wireless sensor network (TPWSN) platform is first demonstrated and discussed, where the energy is harvested from the temperature difference across the window frame. The TPWSN sits completely inside the window/façade frame with no compromise of the outlook and continuously monitors the building environment for the optimal control of the building energy consumption and indoor comfort. The energy harvesting technique grants eternal battery lifetime and significantly simplifies the installation and maintenance of the system with considerable saving of time and cost. In addition, the platform provides energy to various types of sensors for different kinds of sensing needs and store the data to the Google cloud for permanent storage and advanced analytics.
The thermoelectric powered system works well for the sensors and microcontrollers but fails to provide enough power to the actuators. A novel sun-powered smart window blinds (SPSWB) system is designed, prototyped, and tested in this dissertation with solar energy harvesting on window blinds which provides enough power for the actuators. The thin-film photovoltaic cells are attached on one side of slats for energy harvesting and a PVdF-HFP coating is attached on the other side for the passive cooling. The voltage regulation and battery management systems are designed and tested, where a stable 55% energy efficiency from the PV into the battery has been achieved. The automatic control of the window blinds is accomplished with the help of sensors and a microcontroller. The energy equilibrium analysis is proposed and demonstrated with the local solar data to incorporate the influence of local weather conditions and solar zenith angle, from which we demonstrated that much more power than needed can be harvested. The abundant energy harvested validates the feasibility and the robustness of the system and proves its wide application potentials to various sensors and applications.
In conclusion, both passive and active adaptations to the environment are investigated to build up the next generation of smart building envelope systems. The building integrated photovoltaic thermal roof is designed, fabricated, tested, and modeled in detail, which provides structural support to the external loads and improves the energy efficiency of buildings. The smart window/façade systems serve as a platform for various sensors and actuators via the energy harvesting from the ambient environment, and could significantly improve the energy expenditure with minimal impact of internal comfort
Stress dependent gas-water relative permeability in gas hydrates: A theoretical model
        Research activities are currently being conducted to study multiphase flow in hydrate-bearing sediments (HBS). In this study, in view of the assumption that hydrates are evenly distributed in HBS with two major hydrate-growth patterns, i.e., pore filling hydrates (PF hydrates), wall coating hydrates (WC hydrates) and a combination of the two, a theoretical relative  permeability model is proposed for gas-water flow through HBS. Besides, in this proposed model, the change in pore structure (e.g., pore radius) of HBS due to effective stress is taken into account. Then, model validation is performed by comparing the predicted results from the derived model with that from the existing model and test data. By setting the value of hydrate saturation to zero, our derived model can be reducible to the existing model, which demonstrates that the existing model is a special case of our model. The results reveal that, under the same saturation, relative permeability to water Krw (or gas Krg) in PF hydrates is smaller than that in WC hydrates. Moreover, the morphological characteristics of relative permeability curve (relative permeability versus gas saturation) for WC hydrate and PF hydrate are different.Cited as: Lei, G., Liao, Q., Chen, W., Lin, Q., Zhang, L., Xue, L. Stress dependent gas-water relative permeability in gas hydrates: A theoretical model. Advances in Geo-Energy Research, 2020, 4(3): 326-338, doi: 10.46690/ager.2020.03.1
Solar window blinds with passive cooling coating and smart controllers
In the recent design of solar window blinds, the flexible solar films are attached to one side of the window blinds, making use of the building facades. As solar films absorb the heat from sunlight, a significant decrease in energy conversion efficiency becomes one obstacle for widespread commercial application. In order to tackle the difficulty, this project yields an improvement, where a passive cooling coating (PCC) is applied to another side of the window blinds. The PCC makes the temperature of window blinds lower than the ambient temperature effectively, by emitting the long-wave infrared to the outer environment. With the aid of PCC, the lower in-room temperature is attained, resulting in less energy required for air conditioners during summers. The solar window blinds involve two work states: (I) solar films are orientated towards the sunlight to harvest energy; (II) PCCs are orientated towards the sunlight to cool down the surrounding temperature. The switch of work states between (I) and (II) is achieved by smart controllers based on temperature data acquired from sensors. A prototype is fabricated to demonstrated how much energy conversion efficiency is promoted with PCCs
Degraded Synergistic Recruitment of sEMG Oscillations for Cerebral Palsy Infants Crawling
Background: Synergistic recruitment of muscular activities is a generally accepted mechanism for motor function control, and motor dysfunction, such as cerebral palsy (CP), destroyed the synergistic electromyography activities of muscle group for limb movement. However, very little is known how motor dysfunction of CP affects the organization of the myoelectric frequency components due to the abnormal motor unit recruiting patterns.Objectives: Exploring whether the myoelectric activity can be represented with synergistic recruitment of surface electromyography (sEMG) frequency components; evaluating the effect of CP motor dysfunction on the synergistic recruitment of sEMG oscillations.Methods: Twelve CP infants and 17 typically developed (TD) infants are recruited for self-paced crawling on hands and knees. sEMG signals have been recorded from bilateral biceps brachii (BB) and triceps brachii (TB) muscles. Multi-scale oscillations are extracted via multivariate empirical mode decomposition (MEMD), and non-negative matrix factorization (NMF) method is employed to obtain synergistic pattern of these sEMG oscillations. The coefficient curve of sEMG oscillation synergies are adopted to quantify the time-varying recruitment of BB and TB myoelectric activity during infants crawling.Results: Three patterns of sEMG oscillation synergies with specific frequency ranges are extracted in BB and TB of CP or TD infants. The contribution of low-frequency oscillation synergy of BB in CP group is significantly less than that in TD group (p < 0.05) during forward swing phase for slow contraction; however, this low-frequency oscillation synergy keep higher level during the backward swing phase crawling. For the myoelectric activities of TB, there is not enough high-frequency oscillation recruitment of sEMG for the fast contraction in propulsive phase of CP infants crawling.Conclusion: Our results reveal that, the myoelectric activities of a muscle can be manifested as sEMG oscillation synergies, and motor dysfunction of CP degrade the synergistic recruitment of sEMG oscillations due to the impaired CNS regulation and destroyed MU/muscle fiber. Our preliminary work suggests that time-varying coefficient curve of sEMG oscillation synergies is a potential index to evaluate the abnormal recruitment of electromyography activities affected by CP disorders
Epstein-Barr Virus Nuclear Antigen 3C Facilitates G1-S Transition by Stabilizing and Enhancing the Function of Cyclin D1
EBNA3C, one of the Epstein-Barr virus (EBV)-encoded latent antigens, is essential for primary B-cell transformation. Cyclin D1, a key regulator of G1 to S phase progression, is tightly associated and aberrantly expressed in numerous human cancers. Previously, EBNA3C was shown to bind to Cyclin D1 in vitro along with Cyclin A and Cyclin E. In the present study, we provide evidence which demonstrates that EBNA3C forms a complex with Cyclin D1 in human cells. Detailed mapping experiments show that a small N-terminal region which lies between amino acids 130–160 of EBNA3C binds to two different sites of Cyclin D1- the N-terminal pRb binding domain (residues 1–50), and C-terminal domain (residues 171–240), known to regulate Cyclin D1 stability. Cyclin D1 is short-lived and ubiquitin-mediated proteasomal degradation has been targeted as a means of therapeutic intervention. Here, we show that EBNA3C stabilizes Cyclin D1 through inhibition of its poly-ubiquitination, and also increases its nuclear localization by blocking GSK3β activity. We further show that EBNA3C enhances the kinase activity of Cyclin D1/CDK6 which enables subsequent ubiquitination and degradation of pRb. EBNA3C together with Cyclin D1-CDK6 complex also efficiently nullifies the inhibitory effect of pRb on cell growth. Moreover, an sh-RNA based strategy for knock-down of both cyclin D1 and EBNA3C genes in EBV transformed lymphoblastoid cell lines (LCLs) shows a significant reduction in cell-growth. Based on these results, we propose that EBNA3C can stabilize as well as enhance the functional activity of Cyclin D1 thereby facilitating the G1-S transition in EBV transformed lymphoblastoid cell lines
Optimizing the thermal energy storage performance of shallow aquifers based on gray correlation analysis and multi-objective optimization
The operation parameters and well layout parameters of aquifer thermal energy storage (ATES) system directly influence the thermal energy storage performance. How to optimize the parameters to obtain the optimal process scheme is of great significance to promote the field application of ATES. Taking the thermal storage performance of shallow aquifer as the optimization objective, this paper compares the influence degrees of key factors on thermal storage performance by means of gray correlation analysis (GCA), and prepares the optimal thermal storage scheme by using the multi-objective optimization method. The following results are obtained. First, the great difference between inlet temperature and aquifer weakens the thermal storage capacity of the system, while the thermal interference between thermal storage wells of the same type is favorable for thermal storage capacity instead. Second, aquifer thickness and well number have a greater impact on the thermal loss rate, while injection rate and well spacing have a significant influence on the thermal recovery rate. The inlet temperature has the least effect on both of them. Third, the optimal thermal storage scheme is the single well system with inlet temperature of 25 °C, aquifer thickness of 106.597 m and injection rate of 30 kg/s. In conclusion, the influence degrees of the key parameters on thermal loss rate and thermal recovery rate are different, so in order to improve the thermal storage performance, equilibrium optimization is necessary between both of them. In addition, the optimization scheme effectively expands the thermal storage volume, and reduces the heat loss while improving the thermal recovery, with thermal loss rate and thermal recovery rate of the whole system optimized by 12.69% and 3.19% respectively on the basic case, which can provide a reference for the rational design of ATES system
Comprehensive and integrative analysis identifies microRNA-106 as a novel non-invasive biomarker for detection of gastric cancer
Abstract Background Recently, accumulating evidences have revealed that microRNA-106 (miR-106) may serve as a non-invasive and cost-effective biomarker in gastric cancer (GC) detection. However, inconsistent results have prevented its application to clinical practice. Methods As a result of this, a comprehensive meta-analysis was conducted to evaluate the diagnostic performance of miR-106 alone and miR-106-related combination markers for GC detection. Meanwhile, an integrative bioinformatics analysis was performed to explore the function of miR-106 at the systems biology level. Results The results in our work showed that sensitivity of 0.71 (95% CI 0.65–0.76) and specificity of 0.82 (0.72–0.88), with the under area AUC (area under the curve) value of 0.80 (0.76–0.83) for miR-106 alone. Prospectively, miR-106-related combination markers improved the combined sensitivity, specificity and AUC, describing the discriminatory ability of 0.78 (0.65–0.87), 0.83 (0.77–0.89) and 0.88 (0.85–0.90) in the present analysis. Furthermore, targets of miR-106 were obtained and enriched by gene ontology and Kyoto Encyclopedia of Genes and Genomes pathway analysis, revealing their associations with the occurrence and development of GC. Hub genes and significant modules were identified from the protein–protein interaction networks constructed by miR-106 targets and found closely associated with the initiation and progression of GC again. Conclusions Our comprehensive and integrative analysis revealed that miR-106 may be suitable as a diagnostic biomarker for GC while microRNA combination biomarkers may provide a new alternative for clinical application. However, it is necessary to conduct large-scale population-based studies and biological experiments to further investigate the diagnostic value of miR-106
- …