1,264 research outputs found
Electron-multiplying CCDs for future soft X-ray spectrometers
CCDs have been used in several high resolution soft X-ray spectrometers for both space and terrestrial applications such as the Reflection Grating Spectrometer on XMM-Newton and the Super Advanced X-ray Emission Spectrometer at the Paul Scherrer Institut in Switzerland. However, with their ability to use multiplication gain to amplify signal and suppress readout noise, EM-CCDs are being considered instead of CCDs for future soft X-ray spectrometers. When detecting low energy X-rays, EM-CCDs are able to increase the Signal-to-Noise ratio of the device, making the X-rays much easier to detect. If the signal is also significantly split between neighbouring pixels, the increase in the size of the signal will make complete charge collection and techniques such as centroiding easier to accomplish. However, multiplication gain from an EM-CCD does cause a degradation of the energy resolution of the device and there are questions about how the high field region in an EM-CCD will behave over time in high radiation environments. This paper analyses the possible advantages and disadvantages of using EM-CCDs for high resolution soft X-ray spectroscopy and suggests in which situations using them would not only be possible, but also beneficial to the instrument
Theories for the Fermi Scale
I give a short review of our present understanding of new theories of the
electroweak scale, with emphasis on recent progress. Plenary talk at the EPS
2007 Conference at Manchester.Comment: 14 pages, EPS 2007 Conferenc
Low-scale warped extra dimension and its predilection for multiple top quarks
Within warped extra dimension models that explain flavor through geometry,
flavor changing neutral current constraints generally force the Kaluza-Klein
scale to be above many TeV. This creates tension with a natural electroweak
scale. On the other hand, a much lower scale compatible with precision
electroweak and flavor changing neutral current constraints is allowed if we
decouple the Kaluza-Klein states of Standard Model gauge bosons from light
fermions bulk mass parameters). The main
signature for this approach is four top quark production via the Kaluza-Klein
excitations' strong coupling to top quarks. We study single lepton, like-sign
dilepton, and trilepton observables of four-top events at the Large Hadron
Collider. The like-sign dilepton signature typically has the largest discovery
potential for a strongly coupled right-handed top case (M_{KK} \sim 2-2.5
\TeV), while single lepton is the better when the left-handed top couples most
strongly (M_{KK} \sim 2 \TeV). We also describe challenging lepton-jet
collimation issues in the like-sign dilepton and trilepton channels. An
alternative single lepton observable is considered which takes advantage of the
many bottom quarks in the final state. Although searches of other particles may
compete, we find that four top production via Kaluza-Klein gluons is most
promising in a large region of this parameter space.Comment: 35 pages, 8 figures. discussions improved, references adde
Top Quark Physics at the LHC: A Review of the First Two Years
This review summarizes the highlights in the area of top quark physics
obtained with the two general purpose detectors ATLAS and CMS during the first
two years of operation of the Large Hadron Collider LHC. It covers the 2010 and
2011 data taking periods, where the LHC provided pp collisions at a
center-of-mass energy of sqrt(s)=7 TeV. Measurements are presented of the total
and differential top quark pair production cross section in many different
channels, the top quark mass and various other properties of the top quark and
its interactions, for instance the charge asymmetry. Measurements of single top
quark production and various searches for new physics involving top quarks are
also discussed. The already very precise experimental data are in good
agreement with the standard model.Comment: 107 pages, invited review for Int. J. Mod. Phys. A, v2 is identical
to v1 except for the addition of the table of content
The Discovery Potential of a Super B Factory
The Proceedings of the 2003 SLAC Workshops on flavor physics with a high
luminosity asymmetric e+e- collider. The sensitivity of flavor physics to
physics beyond the Standard Model is addressed in detail, in the context of the
improvement of experimental measurements and theoretical calculations.Comment: 476 pages. Printed copies may be obtained by request to
[email protected] . arXiv admin note: v2 appears to be identical to v
Quantifying Dispersal of European Culicoides (Diptera: Ceratopogonidae) Vectors between Farms Using a Novel Mark-Release-Recapture Technique
Studying the dispersal of small flying insects such as Culicoides constitutes a great challenge due to huge population sizes and lack of a method to efficiently mark and objectively detect many specimens at a time. We here describe a novel mark-release-recapture method for Culicoides in the field using fluorescein isothiocyanate (FITC) as marking agent without anaesthesia. Using a plate scanner, this detection technique can be used to analyse thousands of individual Culicoides specimens per day at a reasonable cost. We marked and released an estimated 853 specimens of the Pulicaris group and 607 specimens of the Obsoletus group on a cattle farm in Denmark. An estimated 9,090 (8,918-9,260) Obsoletus group specimens and 14,272 (14,194-14,448) Pulicaris group specimens were captured in the surroundings and subsequently analysed. Two (0.3%) Obsoletus group specimens and 28 (4.6%) Pulicaris group specimens were recaptured. The two recaptured Obsoletus group specimens were caught at the release point on the night following release. Eight (29%) of the recaptured Pulicaris group specimens were caught at a pig farm 1,750 m upwind from the release point. Five of these were recaptured on the night following release and the three other were recaptured on the second night after release. This is the first time that movement of Culicoides vectors between farms in Europe has been directly quantified. The findings suggest an extensive and rapid exchange of disease vectors between farms. Rapid movement of vectors between neighboring farms may explain the the high rate of spatial spread of Schmallenberg and bluetongue virus (BTV) in northern Europe
Higgs Low-Energy Theorem (and its corrections) in Composite Models
The Higgs low-energy theorem gives a simple and elegant way to estimate the
couplings of the Higgs boson to massless gluons and photons induced by loops of
heavy particles. We extend this theorem to take into account possible nonlinear
Higgs interactions resulting from a strong dynamics at the origin of the
breaking of the electroweak symmetry. We show that, while it approximates with
an accuracy of order a few percents single Higgs production, it receives
corrections of order 50% for double Higgs production. A full one-loop
computation of the gg->hh cross section is explicitly performed in MCHM5, the
minimal composite Higgs model based on the SO(5)/SO(4) coset with the Standard
Model fermions embedded into the fundamental representation of SO(5). In
particular we take into account the contributions of all fermionic resonances,
which give sizeable (negative) corrections to the result obtained considering
only the Higgs nonlinearities. Constraints from electroweak precision and
flavor data on the top partners are analyzed in detail, as well as direct
searches at the LHC for these new fermions called to play a crucial role in the
electroweak symmetry breaking dynamics.Comment: 30 pages + appendices and references, 12 figures. v2: discussion of
flavor constraints improved; references added; electroweak fit updated,
results unchanged. Matches published versio
Identifying the colour of TeV-scale resonances
We explore how the colour of any new TeV-scale resonances that decay into top
quark pairs can be identified by studying the dependence of the observed
cross-section on a central jet veto. To facilitate this study, colour octet
resonance production was implemented in Pythia8 and colour singlet resonance
production is simulated after minor modifications. We find that the colour of a
2 TeV resonance can be identified with 10/fb of data at a centre-of-mass energy
of 14 TeV for a wide range of couplings, but only if the uncertainty in the
theoretical prediction is dramatically reduced from its current level.Comment: 18 pages, 10 figure
Heavy Squarks at the LHC
The LHC, with its seven-fold increase in energy over the Tevatron, is capable
of probing regions of SUSY parameter space exhibiting qualitatively new
collider phenomenology. Here we investigate one such region in which first
generation squarks are very heavy compared to the other superpartners. We find
that the production of these squarks, which is dominantly associative, only
becomes rate-limited at mSquark > 4(5) TeV for L~10(100) fb-1. However,
discovery of this scenario is complicated because heavy squarks decay primarily
into a jet and boosted gluino, yielding a dijet-like topology with missing
energy (MET) pointing along the direction of the second hardest jet. The result
is that many signal events are removed by standard jet/MET anti-alignment cuts
designed to guard against jet mismeasurement errors. We suggest replacing these
anti-alignment cuts with a measurement of jet substructure that can
significantly extend the reach of this channel while still removing much of the
background. We study a selection of benchmark points in detail, demonstrating
that mSquark= 4(5) TeV first generation squarks can be discovered at the LHC
with L~10(100)fb-1
Going beyond histology. Synchrotron micro-computed tomography as a methodology for biological tissue characterization: from tissue morphology to individual cells
Current light microscopic methods such as serial sectioning, confocal microscopy or multiphoton microscopy are severely limited in their ability to analyse rather opaque biological structures in three dimensions, while electron optical methods offer either a good three-dimensional topographic visualization (scanning electron microscopy) or high-resolution imaging of very thin samples (transmission electron microscopy). However, sample preparation commonly results in a significant alteration and the destruction of the three-dimensional integrity of the specimen. Depending on the selected photon energy, the interaction between X-rays and biological matter provides semi-transparency of the specimen, allowing penetration of even large specimens. Based on the projection-slice theorem, angular projections can be used for tomographic imaging. This method is well developed in medical and materials science for structure sizes down to several micrometres and is considered as being non-destructive. Achieving a spatial and structural resolution that is sufficient for the imaging of cells inside biological tissues is difficult due to several experimental conditions. A major problem that cannot be resolved with conventional X-ray sources are the low differences in density and absorption contrast of cells and the surrounding tissue. Therefore, X-ray monochromatization coupled with a sufficiently high photon flux and coherent beam properties are key requirements and currently only possible with synchrotron-produced X-rays. In this study, we report on the three-dimensional morphological characterization of articular cartilage using synchrotron-generated X-rays demonstrating the spatial distribution of single cells inside the tissue and their quantification, while comparing our findings to conventional histological techniques
- …