Empirical research on the evaluation model and method of sustainability of the open source ecosystem

The development of open source brings new thinking and production modes to software engineering and computer science, and establishes a software development method and ecological environment in which groups participate. Regardless of investors, developers, participants, and managers, they are most concerned about whether the Open Source Ecosystem can be sustainable to ensure that the ecosystem they choose will serve users for a long time. Moreover, the most important quality of the software ecosystem is sustainability, and it is also a research area in Symmetry. Therefore, it is significant to assess the sustainability of the Open Source Ecosystem. However, the current measurement of the sustainability of the Open Source Ecosystem lacks universal measurement indicators, as well as a method and a model. Therefore, this paper constructs an Evaluation Indicators System, which consists of three levels: The target level, the guideline level and the evaluation level, and takes openness, stability, activity, and extensibility as measurement indicators. On this basis, a weight calculation method, based on information contribution values and a Sustainability Assessment Model, is proposed. The models and methods are used to analyze the factors affecting the sustainability of Stack Overflow (SO) ecosystem. Through the analysis, we find that every indicator in the SO ecosystem is partaking in different development trends. The development trend of a single indicator does not represent the sustainable development trend of the whole ecosystem. It is necessary to consider all of the indicators to judge that ecosystem’s sustainability. The research on the sustainability of the Open Source Ecosystem is helpful for judging software health, measuring development efficiency and adjusting organizational structure. It also provides a reference for researchers who study the sustainability of software engineering

Rietveld Structure Refinement of Cu-Trien Exchanged Nontronites

The Rietveld analysis of X-ray powder diffraction patterns is used widely for obtaining the structural information of clay minerals. However, the complex hydration behavior and the variability of interlayer contents are often considered difficult to be described correctly by a simple structure model. In the present work, the use of Cu-triethylenetetramine (Cu-trien)-exchanged nontronites has been proposed to simplify the interlayer structure. This method provides a potential to obtain the structural information of nontronites, for example, the layer charge density, occupancies of cis-octahedral sites, and the iron content by the Rietveld analysis from the X-ray powder diffraction patterns. The approach was demonstrated on three Cu-trien-exchanged nontronite samples. The Rietveld refinements were carried out first on the purified samples and the results showed a good peak fitting between measured and calculated patterns. The refined iron content and the occupancies of cis-octahedral sites are in general agreement with the reference data, which have been obtained from chemical and thermal analyses. The refinement of layer charge density showed lower values compared with the reference. It may be due to the assumption of temperature factor of Cu-trien in the interlayer. A raw sample with natural impurities was chosen to test the applicability of this method. The refinement pattern of the raw sample led to good agreement with the observed data. The results of the iron content and the occupancies of cis-octahedral sites showed the same tendency as purified samples. This study showed that this approach allows for obtaining some structural details of nontronites directly from X-ray powder diffraction patterns of Cu-trien-exchanged samples

Structure and photoluminescence properties of red-emitting apatite-type phosphor NaY9(SiO4)6O2:Sm3+ with excellent quantum efficiency and thermal stability for solid-state lighting.

A novel red-emitting phosphor NaY9(SiO4)6O2:Sm3+ (NYS:Sm3+) was synthesized and the X-ray diffraction and high-resolution TEM testified that the NYS compound belongs to the apatite structure which crystallized in a hexagonal unit cell with space group P63/m. The novel phosphor boasts of such three advantageous properties as perfect compatible match with the commercial UV chips, 73.2% quantum efficiency and 90.9% thermal stability at 150 °C. Details are as follows. NYS:Sm3+ phosphor showed obvious absorption in the UV regions centered at 407 nm, which can be perfectly compatible with the commercial UV chips. The property investigations showed that NYS:Sm3+ phosphor emitted reddish emission with CIE coordination of (0.563, 0.417). The optimum quenching concentration of Sm3+ in NYS phosphor was about 10%mol, and the corresponding concentration quenching mechanism was verified to be the electric dipole-dipole interaction. Upon excitation at 407 nm, the composition-optimized NYS:0.10Sm3+ exhibited a high quantum efficiency of 73.2%, and its luminescence intensity at 150 °C decreased simply to 90.9% of the initial value at room temperature. All of the results indicated that NYS:Sm3+ is a promising candidate as a reddish-emitting UV convertible phosphor for application in white light emitting diodes (w-LEDs)

Enhanced Degradation of Rh 6G by Zero Valent Iron Loaded on Two Typical Clay Minerals With Different Structures Under Microwave Irradiation

Nanoscale zero valent iron has been a widespread concern in various fields due to its large specific surface area and high reactivity. However, nanoscale zero valent iron (nZVI) is very likely to aggregate and be oxidized, which limit its wide application in industry. Most clay minerals have a large adsorption capacity of cations due to their negative charges and high specific surface areas. In the present work, nZVI was loaded onto two typical clay minerals: kaolinite and sepiolite, to inhibit its oxidation and aggregation. The composites were applied to degrade Rhodamine 6G (Rh 6G) under microwave irradiation. The effects of pH value and microwave power on degradation were studied. The results showed that the removal amount of Rh 6G by nZVI/kaolinite was 110 mg/g in 15 min, while it reached 300 mg/g by nZVI/sepiolite. The difference between these two composites was mostly determined by the structures of these two clay minerals

Improvement of magnetite adsorption performance for Pb (II) by introducing defects

Surface defect engineering is an efficient strategy to enhance the adsorption properties of materials. After calcination in argon, the adsorption capacity of natural magnetite to Pb (II) is significantly improved. The Rietveld refinement, Mössbauer spectrum, and XPS were used to prove the existence of oxygen and cation vacancies in the crystal structure of magnetite after calcination, and it is found that the vacancy content is linearly related to the adsorption amount of Pb (II). This indicates that the increase in the adsorption performance of magnetite after calcination is determined by the vacancy. The adsorption capacity increases from 8 to 26 mg/g when the calcination temperature reaches 700°C. The equilibrium adsorption process of Pb (II) on magnetite can be well fitted to the Langmuir model, and the kinetic adsorption followed a pseudo-second-order mechanism. The improvement of the adsorption performance of magnetite is mainly due to the change in its structure, which depends on the oxidation degree and surface effect of magnetite in the calcination process. This work also provides a theoretical basis for the broad application of magnetite as environmental material

Ultrathin Si/CNTs Paper-Like Composite for Flexible Li-Ion Battery Anode With High Volumetric Capacity

Thin and lightweight flexible lithium-ion batteries (LIBs) with high volumetric capacities are crucial for the development of flexible electronic devices. In the present work, we reported a paper-like ultrathin and flexible Si/carbon nanotube (CNT) composite anode for LIBs, which was realized by conformal electrodeposition of a thin layer of silicon on CNTs at ambient temperature. This method was quite simple and easy to scale up with low cost as compared to other deposition techniques, such as sputtering or CVD. The flexible Si/CNT composite exhibited high volumetric capacities in terms of the total volume of active material and current collector, surpassing the most previously reported Si-based flexible electrodes at various rates. In addition, the poor initial coulombic efficiency of the Si/CNT composites can be effectively improved by prelithiation treatment and a commercial red LED can be easily lighted by a full pouch cell using a Si/CNT composite as a flexible anode under flat or bent states. Therefore, the ultrathin and flexible Si/CNT composite is highly attractive as an anode material for flexible LIBs

High inorganic phosphate intake promotes tumorigenesis at early stages in a mouse model of lung cancer

© 2015 Lee et al. Inorganic phosphate (Pi) is required by all living organisms for the development of organs such as bone, muscle, brain, and lungs, regulating the expression of several critical genes as well as signal transduction. However, little is known about the effects of prolonged dietary Pi consumption on lung cancer progression. This study investigated the effects of a highphosphate diet (HPD) in a mouse model of adenocarcinoma. K-rasLA1 mice were fed a normal diet (0.3% Pi) or an HPD (1% Pi) for 1, 2, or 4 months. Mice were then sacrificed and subjected to inductively coupled plasma mass/optical emission spectrometry and laser ablation inductively coupled plasma mass-spectrometry analyses, western blot analysis, histopathological, immunohistochemical, and immunocytochemical analyses to evaluate tumor formation and progression (including cell proliferation, angiogenesis, and apoptosis), changes in ion levels and metabolism, autophagy, epithelial-to-mesenchymal transition, and protein translation in the lungs. An HPD accelerated tumorigenesis, as evidenced by increased adenoma and adenocarcinoma rates as well as tumor size. However, after 4 months of the HPD, cell proliferation was arrested, and marked increases in liver and lung ion levels and in energy production via the tricarboxylic acid cycle in the liver were observed, which were accompanied by increased autophagy and decreased angiogenesis and apoptosis. These results indicate that an HPD initially promotes but later inhibits lung cancer progression because of metabolic adaptation leading to tumor cell quiescence. Moreover, the results suggest that carefully regulated Pi consumption are effective in lung cancer prevention

Using Ionic Liquid Modified Zeolite as a Permeable Reactive Wall to Limit Arsenic Contamination of a Freshwater Lake—Pilot Tests

Arsenic (As) contamination of surface water has long been a threat to human health. Extensive studies were made at the bench-scale for the removal of As from water. Commonly-used materials for the removal of As include Al and Fe hydroxides that will form complexes with As. Recently, modification of Earth materials to reverse their surface charge to positive to reduce the mobility of arsenite and arsenate also attracted great attention. In 2008, a severe As contamination was reported in the lake of Yangzonghai, Yunnan, China. Although the As concentration was maintained below 0.05 mg/L for the lake, after 28 months of restoration, the discharge of mine tailings from a nearby fertilizer plants was still one of the contributors to the As in the lake. In this study, zeolite was modified by ionic liquids and the modified materials were installed as a permeable reactive wall (PRW) to contain the As movement. Preliminary results showed more than an 80% reduction in As after surface water moved through the PWR over the six-month sampling period confirming the effectiveness of ionic liquid-modified Earth materials for environmental application

Study on Gemological Characteristics and Inclusions of Yellow Topaz

Topaz is a kind of mineral with variable composition and a common gemstone variety. Because of its wide distribution and rich colors, it has attracted the attention of scholars around the world. In this paper, the composition, spectral, and gemological characteristics of yellow topaz were systematically characterized, and the dark inclusions inside the samples were discussed and analyzed. The results show that the yellow topaz has a glassy luster, transparent, with a refractive index of 1.609–1.617 and a birefringence of 0.008. The topaz sample has columnar crystal shape and a typical rhomboid cross section. The infrared spectral characteristic absorption peaks of yellow topaz mainly appear near 3649, 3426, 950, 628, 550, and 457 cm−1. The characteristic absorption peaks for Raman spectra are mainly at 937, 404, and 267 cm−1. The UV-vis spectra of all samples only had strong absorption bands in the range of 200–300 nm. The results of XRF and EMPA showed that the contents of Al2O3 and SiO2 in the samples were 52.79 (wt%) and 29.55 (wt%), respectively, and it was reasonable to speculate that the chromogenic element of the yellow color was iron. The inclusions in yellow topaz samples are mainly fluid inclusions, healing cracks, and albite. This paper has enriched the gemological characteristics of topaz and can provide theoretical data for the research and marketization of topaz