878 research outputs found
A simple model for quantifying change in soil organic C as influenced by tillage and crop rotations on the Canadian prairies
Non-Peer ReviewedSimulation models are required for quantifying the impact of crop rotations and tillage on soil organic C dynamics, and for aggregating C sequestration over a relatively large area. However, most current models of soil organic C have been built based on kinetically defined discrete pools with different turnover times. Those pools of soil organic C only exist conceptually. They have not been determined experimentally, thus validation of kinetic models describing soil organic C turnover is usually difficult or not independent from actual measurements. Thus, there is a need to develop a simulation model that can be easily validated and used for estimating future projection of C sequestration under specified management practices. A simple model has been developed to quantify the impact of crop rotations and tillage on soil organic C and validated using long-term field experiments conducted on the Canadian prairies. This simple model required a few input parameters and accurately predicted the change of soil organic C with a relative error of 5% or better. Crop rotation in cereal-dominant cropping systems, affected the amount of soil organic C due to differences in the amount of crop residue inputs. Clay content of soil played a vital role in determining the soil organic C sequestered under conservation tillage compared to tilled systems. This study also showed that the rate constant of soil organic C turnover was about the same for all systems in the drier region of the Canadian prairies, regardless of soil texture and the cropping system
Long-term tillage and crop rotation effect on soil aggregation
Non-Peer ReviewedTillage and cropping sequences play a key role in controlling soil aggregation. We measured water-stable aggregate (WSA), wind erodible fraction (WEF), and geometric mean diameter (GMD) for six mid to longterm (8 to 25 years) experiments comparing tillage and cropping sequences in the Brown, Dark Brown, and Black Chernozemic soils of Saskatchewan. In the coarse-textured soil, no-tillage (NT) had a higher value of WSA by 49% more than in the wheat-phase of fallow-wheat (F-W), and had a lower value of WEF by 27%
less than in the fallow-phase of F-W compared with minimum tillage (MT). In the medium-textured soils, NT had a higher WAS, ranged from 17 to 38%, and a lower WEF, ranged from 37 to 64% compared with conventional tillage (CT), depending on crop rotation systems. The reduced WEF under NT in the medium-textured soils was due mainly to increased GMD. In the fine-textured soils, NT had a higher WSA, ranged
from 10 to 19% compared with MT or CT, and a lower WEF by 47% compared with MT only in the heavy clay soil. Change in GMD was not detectable in the light- and fine-textured soils. Continuous cropping compared with rotations containing fallow improved soil physical properties by increasing WSA, reducing
WEF in the medium and fine-textured soils, and increasing GMD only in the medium-textured soils. Of the
three soil physical properties determined in this study, WSA was the most sensitive to changes in tillage and crop rotations, then WEF and the least GMD
Theory of Current and Shot Noise Spectroscopy in Single-Molecular Quantum Dots with Phonon Mode
Using the Keldysh nonequilibrium Green function technique, we study the
current and shot noise spectroscopy of a single molecular quantum dot coupled
to a local phonon mode. It is found that in the presence of electron-phonon
coupling, in addition to the resonant peak associated with the single level of
the dot, satellite peaks with the separation set by the frequency of phonon
mode appear in the differential conductance. In the ``single level'' resonant
tunneling region, the differential shot noise power exhibit two split peaks.
However, only single peaks show up in the ``phonon assisted''
resonant-tunneling region. An experimental setup to test these predictions is
also proposed.Comment: 5 pages, 3 eps figures embedde
R-parity violation effect on the top-quark pair production at linear colliders
We investigate in detail the effects of the R-parity lepton number violation
in the minimal supersymmetric standard model (MSSM) on the top-quark pair
production via both and collision modes at the linear
colliders. We find that with the present experimental constrained
parameters, the effect from interactions on the processes
and could be
significant and may reach -30% and several percent, respectively. Our results
show that the effects are sensitive to the c.m.s. energy and the
relevant parameters. However, they are not sensitive to squark and
slepton masses when (or ) and are almost independent on the Comment: Accepted by Phys.Rev.
Multiorder coherent Raman scattering of a quantum probe field
We study the multiorder coherent Raman scattering of a quantum probe field in
a far-off-resonance medium with a prepared coherence. Under the conditions of
negligible dispersion and limited bandwidth, we derive a Bessel-function
solution for the sideband field operators. We analytically and numerically
calculate various quantum statistical characteristics of the sideband fields.
We show that the multiorder coherent Raman process can replicate the
statistical properties of a single-mode quantum probe field into a broad comb
of generated Raman sidebands. We also study the mixing and modulation of photon
statistical properties in the case of two-mode input. We show that the prepared
Raman coherence and the medium length can be used as control parameters to
switch a sideband field from one type of photon statistics to another type, or
from a non-squeezed state to a squeezed state and vice versa.Comment: 12 pages, 7 figures, to be published in Phys. Rev.
Joint Inference in Weakly-Annotated Image Datasets via Dense Correspondence
We present a principled framework for inferring pixel labels in weakly-annotated image datasets. Most previous, example-based approaches to computer vision rely on a large corpus of densely labeled images. However, for large, modern image datasets, such labels are expensive to obtain and are often unavailable. We establish a large-scale graphical model spanning all labeled and unlabeled images, then solve it to infer pixel labels jointly for all images in the dataset while enforcing consistent annotations over similar visual patterns. This model requires significantly less labeled data and assists in resolving ambiguities by propagating inferred annotations from images with stronger local visual evidences to images with weaker local evidences. We apply our proposed framework to two computer vision problems, namely image annotation with semantic segmentation, and object discovery and co-segmentation (segmenting multiple images containing a common object). Extensive numerical evaluations and comparisons show that our method consistently outperforms the state-of-the-art in automatic annotation and semantic labeling, while requiring significantly less labeled data. In contrast to previous co-segmentation techniques, our method manages to discover and segment objects well even in the presence of substantial amounts of noise images (images not containing the common object), as typical for datasets collected from Internet search
Correlated noise in a logistic growth model
The logistic differential equation is used to analyze cancer cell population,
in the presence of a correlated Gaussian white noise. We study the steady state
properties of tumor cell growth and discuss the effects of the correlated
noise. It is found that the degree of correlation of the noise can cause tumor
cell extinction.Comment: 3 pages, 4 figure
Sum rules and energy scales in the high-temperature superconductor YBa2Cu3O6+x
The Ferrell-Glover-Tinkham (FGT) sum rule has been applied to the temperature
dependence of the in-plane optical conductivity of optimally-doped
YBa_2Cu_3O_{6.95} and underdoped YBa_2Cu_3O_{6.60}. Within the accuracy of the
experiment, the sum rule is obeyed in both materials. However, the energy scale
\omega_c required to recover the full strength of the superfluid \rho_s in the
two materials is dramatically different; \omega_c \simeq 800 cm^{-1} in the
optimally doped system (close to twice the maximum of the superconducting gap,
2\Delta_0), but \omega_c \gtrsim 5000 cm^{-1} in the underdoped system. In both
materials, the normal-state scattering rate close to the critical temperature
is small, \Gamma < 2\Delta_0, so that the materials are not in the dirty limit
and the relevant energy scale for \rho_s in a BCS material should be twice the
energy gap. The FGT sum rule in the optimally-doped material suggests that the
majority of the spectral weight of the condensate comes from energies below
2\Delta_0, which is consistent with a BCS material in which the condensate
originates from a Fermi liquid normal state. In the underdoped material the
larger energy scale may be a result of the non-Fermi liquid nature of the
normal state. The dramatically different energy scales suggest that the nature
of the normal state creates specific conditions for observing the different
aspects of what is presumably a central mechanism for superconductivity in
these materials.Comment: RevTeX 4 file, 9 pages with 7 embedded eps figure
Electric current circuits in astrophysics
Cosmic magnetic structures have in common that they are anchored
in a dynamo, that an external driver converts kinetic energy into internal
magnetic energy, that this magnetic energy is transported as Poynting fl ux across the magnetically dominated structure, and that the magnetic energy
is released in the form of particle acceleration, heating, bulk motion,
MHD waves, and radiation. The investigation of the electric current system is
particularly illuminating as to the course of events and the physics involved.
We demonstrate this for the radio pulsar wind, the solar flare, and terrestrial
magnetic storms
Green function techniques in the treatment of quantum transport at the molecular scale
The theoretical investigation of charge (and spin) transport at nanometer
length scales requires the use of advanced and powerful techniques able to deal
with the dynamical properties of the relevant physical systems, to explicitly
include out-of-equilibrium situations typical for electrical/heat transport as
well as to take into account interaction effects in a systematic way.
Equilibrium Green function techniques and their extension to non-equilibrium
situations via the Keldysh formalism build one of the pillars of current
state-of-the-art approaches to quantum transport which have been implemented in
both model Hamiltonian formulations and first-principle methodologies. We offer
a tutorial overview of the applications of Green functions to deal with some
fundamental aspects of charge transport at the nanoscale, mainly focusing on
applications to model Hamiltonian formulations.Comment: Tutorial review, LaTeX, 129 pages, 41 figures, 300 references,
submitted to Springer series "Lecture Notes in Physics
- …