"Hidden” degassing from streams: estimation of the CO2 release from the thermal springs of Sperchios Basin, Greece

Areas located at plate boundaries are characterized by the presence of seismic, volcanic, and geothermal activity, as well as ore deposition. Such processes are enhanced by the circulation of hydrothermal fluids in the crust transporting volatiles from either the deep crust or the mantle to the surface. Intense geodynamic activity is also taking place in Greece giving rise to: (i) the highest seismicity in Europe, (ii) the presence of an active volcanic arc and numerous areas of anomalously high geothermal gradient, and (iii) a widespread occurrence of thermal springs. Elevated heat flow values are concentrated in Sperchios basin, an area characterised by a system of deeply rooted extensional faults and quaternary volcanic activity. This regime favoured the formation of hydrothermal systems, the surface expression of which are thermal springs with intense bubbling of CO2-rich gases. Flux measurements in the bubbling pools were made with the floating chamber method. The highest bubbling CO2 output is found in Thermopyles and Psoroneria (1 and 2 t/d, respectively). The outgoing channels of these springs have an elevated flow (>250 l/s) of gas-charged water (>15 mmol/l of CO2). Although no bubbling is noticed along the stream, the CO2 content decreases by an order of magnitude after few hundreds of metres, indicating an intense degassing from the water. Taking into account the water flow and the amount of CO2 lost to the atmosphere, the CO2 output of the outgoing channels is quantified in >10 t/d for Thermopyles and 9 t/d for Psoroneria. An estimation is also made at Ypati, Kamena Vourla, Koniavitis and Edipsos, where the mean values reach 1 t/d of CO2 for each spring. The obtained values are always higher respect to the estimated outputs from visible bubbling, suggesting that most of the degassing is “hidden”. Furthermore, the loss of CO2 from the water determines a shift in dissolved carbonate species as demonstrated by the pH increase along the channel that leads eventually to an oversaturation in carbonate minerals and therefore travertine deposition. To sum up, the total CO2 output of the study area is estimated at 30 t/d, with the major contribution deriving from the degassing along the outflow channels of the thermal springs. Such output is comparable to that of the single active volcanic systems along the South Aegean Volcanic Arc (Sousaki, Methana, Milos, Santorini, Kos and Nisyros) and highlights the importance of “hidden” degassing along CO2-oversaturated streams

Gas Geochemistry and Fractionation Processes in Florina Basin, Greece

Florina Basin is located in northern Greece, close to Mount Voras where the volcanic activity of Late Messinian age began. In the area, many CO2-rich gas emissions are present as a bubbling free-phase in groundwater (both springs and wells) and soil gases. Volcanism along with the geological and geodynamic regime of the basin, created the ideal conditions for CO2 accumulation in vertically stacked reservoirs. One of these, industrially exploited by the company Air Liquide Greece, produces 30,000 t/a of CO2. Results show that CO2 concentrations in the gases of Florina can arrive up to 99.8% and are mostly above 90%. Moreover, C-isotope composition (-2.1 to + 0.3 h vs. VPDB) indicates a mixed mantle-limestone origin for CO2, while He isotope composition (R/RA from 0.21 to 1.20) shows a prevailing crustal origin with an up to 15% mantle contribution. Helium and methane, with concentrations spanning over three orders of magnitude, show a positive correlation and a consequent high variability of He/CO2 and CH4/CO2 ratios. This variability can be attributed to the interaction of the uprising gases with groundwater that chemically fractionates them due to their different solubility. Based on the CO2, CH4 and He concentrations, gas samples collected in the basin can be divided in 3 groups: a) deep reservoir gases, b) enriched in less soluble gases and c) depleted in less soluble gases. The first group consists of gas samples collected at the Air Liquide extraction wells, which tap a 300m deep reservoir. This group can be considered as the least affected by fractionation processes due to interaction with groundwater. The gases of the second group due to their interaction with shallower unsaturated aquifers, become progressively enriched in less soluble gases (He and CH4). Finally, the third group represents residual gas phases after extensive degassing of the groundwater during its hydrological pathway

Electromagnetic response of LaO_0.94F_0.06FeAs: AC susceptibility and microwave surface resistance

We discuss on the electromagnetic response of a polycrystalline sample of LaO_0.94F_0.06FeAs exposed to DC magnetic fields up to 10 kOe. The low- and high-frequency responses have been investigated by measuring the AC susceptibility at 100 kHz and the microwave surface resistance at 9.6 GHz. At low as well as high DC magnetic fields, the susceptibility strongly depends on the amplitude of the AC driving field, highlighting enhanced nonlinear effects. The field dependence of the AC susceptibility exhibits a magnetic hysteresis that can be justified considering the intragrain-field-penetration effects on the intergrain critical current density. The microwave surface resistance exhibits a clockwise magnetic hysteresis, which cannot be justified in the framework of the critical-state models of the Abrikosov-fluxon lattice; it may have the same origin as that detected in the susceptibility.Comment: 8 pages, 4 embedded eps figures; Proceedings of the 9th EUCAS Conference (Dresden, Germany, September 13-17, 2009

Microwave Response of Coaxial Cavities Made of Bulk Magnesium Diboride

We report on the microwave properties of coaxial cavities built by using bulk MgB2 superconductor prepared by reactive liquid Mg infiltration technology. We have assembled a homogeneous cavity by using an outer MgB2 cylinder and an inner MgB2 rod and a hybrid cavity by using an outer copper cylinder and the same MgB2 rod as inner conductor. By the analysis of the resonance curves, in the different resonant modes, we have determined the microwave surface resistance Rs of the MgB2 materials as a function of the temperature and the frequency, in the absence of dc magnetic fields. At T=4.2 K and f ≈ 2.5 GHz, by an mw pulsed technique, we have determined the quality factor of the homogeneous cavity as a function of the input power up to a maximum level of about 40 dBm (corresponding to a maximum peak magnetic field of about 100 Oe). Contrary to what occurs in many films, Rs of the MgB2 material used does not exhibit visible variations up to an input power level of about 10 dBm and varies less than a factor of 2 on further increasing the input power of 30 dB

Cone beam computed tomography investigation of the antral artery anastomosis in a population of Central Italy

Background: The arterial vascular supply of maxillary sinus has to be considered in all the surgical procedures where it is involved. In particular, the intraosseous anastomosis between the posterior superior alveolar artery and the infraorbital artery branches in the bony canal can be tricky to a not well aware clinician. The aim of this study is to investigate the arterial blood supply of the maxillary sinus to give clinicians the basis for a better understanding of vascular complications that can derive from surgical procedures at this level. Materials and methods: One hundred cone beam computed tomography were analysed by the Imaging software for three-dimensional images, i-Dixel 2.0. The parameters considered have been the presence (i), the calibre (ii), the dorso-ventral length (iii) and the cranio-caudal distance (iv). The data have been processed with means, standard deviations and verified by T-Student test. Results: The statistical outputs showed that the 38% of samples presented the intraosseous anastomosis. Those anastomosis resulted long in dorso-ventral way both on left (12.55 ± 4.3 mm) and right side (12.4 ± 4.3 mm). The mean cranio- -caudal distance resulted 15.71 ± 5.08 mm on the left and 14.73 ± 4.74 mm on right side. The calibre measurements resulted quite big as well: 1.68 ± 0.3 mm on the left and 1.54 ± 0.38 mm on the right. The differences between the right and left sides were found not statistically significant. Conclusions: This in vivo investigation shows how a knowledge of the maxillary sinus vascularisation is essential during the programming surgical phase in order to prevent blood complications during the operations involving this region.

Duvalo “Volcano” (North Macedonia): A Purely Tectonic‐related CO2 Degassing System

Duvalo “volcano” is a site of anomalous geogenic degassing close to Ohrid (North Macedonia) not related to volcanic activity, despite its name. CO2 flux measurements made with the accumulation chamber (321 sites over ∼50,000 m2) showed fluxes up to nearly 60,000 g m-2 d-1, sustaining a total output of ∼67 t d-1. Soil gas samples were taken at 50 cm depth from sites with high CO2 fluxes and analyzed for their chemical and isotope composition. The gas is mainly composed by CO2 (> 90%) with significant concentrations of H2S (up to 0.55 %) and CH4 (up to 0.32 %). The isotope compositions of He (R/RA 0.10) and of CO2 (δ13C ∼0‰) exclude significant mantle contribution, while δ13C-CH4 (∼ -35‰) and δ2H-CH4 (∼ -170‰) suggest a thermogenic origin for CH4. The area is characterized by intense seismic activity and Duvalo corresponds to an active tectonic structure bordering the Ohrid graben. The production of H2S within the stratigraphic sequence may be explained by thermochemical reduction of sulfate. The uprising H2S is partially oxidized to sulfuric acid that, reacting with carbonate rocks, releases CO2. The tectonic structure of the area favors fluid circulation, sustaining H2S production and oxidation, CO2 production and allowing the escape of the gases to the atmosphere. In the end, Duvalo represents a tectonic-related CO2 degassing area whose gases originate mostly, if not exclusively, in the shallowest part of the crust (<10 km). This finding highlights that even systems with trivial mantle contribution may sustain intense CO2 degassing (> 1000 t km-2 d-1)

Hellenic karst waters: geogenic and anthropogenic processes affecting their geochemistry and quality

Karst hydrosystems represent one of the largest global drinking water resources, but they are extremely vulnerable to pollution. Climate change, high population density, intensive industrial, and agricultural activities are the principal causes of deterioration, both in terms of quality and quantity, of these resources. Samples from 172 natural karst springs were collected in the whole territory of Greece. To identify any geogenic contamination and/or anthropogenic pollution, analyses of their chemical compositions, in terms of major ions and trace elements, were performed and compared to the EU limits for drinking water. Based on chloride content, the collected karst springs were divided into two groups: low-chloride (< 100 mg L− 1) and high-chloride content (> 100 mg L− 1). An additional group of springs with calcium-sulfate composition was recognised. Nitrate concentrations were always below the EU limit (50 mg L− 1), although some springs presented elevated concentrations. High contents in terms of trace elements, such as B, Sr, As, and Pb, sometimes exceeding the limits, were rarely found. The Greek karst waters can still be considered a good quality resource both for human consumption and for agriculture. The main issues derive from seawater intrusion in the aquifers along the coasts. Moreover, the main anthropogenic pollutant is nitrate, found in higher concentrations mostly in the same coastal areas where human activities are concentrated. Finally, high levels of potentially harmful trace elements (e.g. As, Se) are very limited and of natural origin (geothermal activity, ore deposits, etc.)

Preliminary geochemical characterization of gas manifestations in North Macedonia

L ike most of the Balkan Peninsula, North Macedonia is a geodynamically active area. As such it has many hydrothermal features and gas manifestations. Until now, no systematic study about the geochemical characterization of the geogenic gases was made before in this country. In August 2019, 24 gas samples were collected in the study area. All, except one collected at Duvalo (soil gas), are gases bubbling or dissolved in thermomineral waters (temperatures from 12 to 66 \ub0C). They were analysed in the laboratory for their chemical (He, Ne, Ar, O2 , N2 , H2 , H2S, CH4 and CO2) and isotopic composition (\u3b413C-CO2, \u3b413C-CH4, \u3b42H-CH4 and R/RA). Most of the gases have CO2 as the main component (400-998,000 ppm) while the remaining are enriched in N2 (1300-950,000 ppm). Helium ranges from 0.3 to 2560 ppm while CH4 from 1.6 to 20,200 ppm. R/RA and 4He/20Ne ratios indicate a generally low atmospheric contamination, a prevailing crustal contribution and mantle contributions between 1 and 20% considering a MORB endmember. The highest mantle contributions are found in the SE part of the country very close to the sites that show the highest R/RA values in continental Greece [1]. This area is characterised by extensional tectonics and Plio- Pleistocene volcanism. A quite high mantle contribution (about 15%) is also found in two manifestations in the NW part of the country along a main normal fault system. With the exception of the sample of Smokvica, which has very low CO2 (1400 ppm) and \u3b413C-CO2 (-15.7 \u2030 V-PDB), all free gases show a relatively narrow range in \u3b413C-CO2 values (-4.6 to +1.0 \u2030 V-PDB) indicating the mixing between a mantle and a carbonate rock source. The isotope composition allows us to assign the CH4 origin to three sources. The largest group can be attributed to a hydrothermal origin (\u3b413C-CH4 around -20 \u2030 V-PDB and \u3b42H-CH4 around -100\u2030). Three samples collected in the SW part of the country have a thermogenic origin (\u3b413C-CH4 around -35 \u2030 V-PDB and \u3b42H-CH4 around -160\u2030 V-SMOW). Finally, one sample (Smokvica) with the highest values (\u3b413C-CH4 -7.2 \u2030 V-PDB and \u3b42H-CH4 -80\u2030 V-SMOW) may be attributed to abiotic processes in a continental serpentinization environment or to methane oxidation

Active Degassing of Deeply Sourced Fluids in Central Europe: New Evidences From a Geochemical Study in Serbia

We report on the results of an extensive geochemical survey of fluids released in the Vardar zone (central-western Serbia), a mega-suture zone at the boundary between Eurasia and Africa plates. Thirty-one bubbling gas samples are investigated for their chemical and isotopic compositions (He, C, Ar) and cluster into three distinct groups (CO2-dominated, N2-dominated, and CH4-dominated) based on the dominant gas species. The measured He isotope ratios range from 0.08 to 1.19 Ra (where Ra is the atmospheric ratio), and reveal for the first time the presence of a minor (<20%) but detectable regional mantle-derived component in Serbia. δ13C values range from −20.2‰ to −0.1‰ (versus PDB), with the more negative compositions observed in N2-dominated samples. The carbon-helium relationship indicates that these negative δ13C compositions could be due to isotopic fractionation processes during CO2 dissolution into groundwater. In contrast, CO2-rich samples reflect mixing between crustal and mantle-derived CO2. Our estimated mantle-derived He flux (9.0 × 109 atoms m−2 s−1) is up to 2 orders of magnitude higher than the typical fluxes in stable continental areas, suggesting a structural/tectonic setting favoring the migration of deep-mantle fluids through the crust