Electrocatalytic Hydrogen Evolution Reaction on Edges of a Few Layer Molybdenum Disulfide Nanodots

The design and development of inexpensive highly efficient electrocatalysts for hydrogen production, underpins several emerging clean-energy technologies. In this work, for the first time, molybdenum disulfide (MoS2) nanodots have been synthesized by ionic liquid assisted grinding exfoliation of bulk platelets and isolated by sequential centrifugation. The nanodots have a thickness of up to 7 layers (4 nm) and an average lateral size smaller than 20 nm. Detailed structural characterization established that the nanodots retained the crystalline quality and low oxidation states of the bulk material. The small lateral size and reduced number of layers provided these nanodots with an easier path for the electron transport and plentiful active sites for the catalysis of hydrogen evolution reaction (HER) in acidic electrolyte. The MoS2 nanodots exhibited good durability and a Tafel slope of 61 mVdec-1 with an estimated onset potential of -0.09 V vs RHE, which are considered among the best values achieved for 2H phase. It is envisaged that this work may provide a simplistic route to synthesize a wide range of 2D layered nanodots that have applications in water splitting and other energy related technologies. KEYWORDS: MoS2 nanosheets, hydrogen evolution reaction, electrocatalysis, edges, nanodots, ionic liquid exfoliation, water splittingComment: Corresponding author: [email protected]. in ACS Applied Materials and Interfaces, 201

Integrative Analyses of Long Non-coding RNA and mRNA Involved in Piglet Ileum Immune Response to Clostridium perfringens Type C Infection

Long non-coding RNAs (lncRNAs) have been shown to play important roles in regulating host immune and inflammatory responses to bacterial infection. Infection with Clostridium perfringens (C. perfringens), a food-borne zoonotic pathogen, can lead to a series of inflammatory diseases in human and piglet, greatly challenging the healthy development of global pig industry. However, the roles of lncRNAs involved in piglet immune response against C. perfringens type C infection remain unknown. In this study, the regulatory functions of ileum lncRNAs and mRNAs were investigated in piglet immune response to C. perfringens type C infection among resistance (IR), susceptibility (IS) and sham-inoculation (control, IC) groups. A total of 480 lncRNAs and 3,669 mRNAs were significantly differentially expressed, the differentially expressed lncRNAs and mRNAs in the IR and IS groups were enriched in various pathways of ABC transporters, olfactory transduction, PPAR signaling pathway, chemokine signaling pathway and Toll-like receptor signaling pathway, involving in regulating piglet immune responses and resistance during infection. There were 212 lncRNAs and 505 target mRNAs found to have important association with C. perfringens infectious diseases, furthermore, 25 dysregulated lncRNAs corresponding to 13 immune-related target mRNAs were identified to play potential roles in defense against bacterial infection. In conclusion, the results improve our understanding on the characteristics of lncRNAs and mRNAs on regulating host immune response against C. perfringens type C infection, which will provide a reference for future research into exploring C. perfringens-related diseases in human

Analyses of long non-coding RNA and mRNA profiling in the spleen of diarrheic piglets caused by Clostridium perfringens type C

Background Clostridium perfringens (C. perfringens) type C is the most common bacteria causing piglet diarrheal disease and it greatly affects the economy of the global pig industry. The spleen is an important immune organ in mammals; it plays an irreplaceable role in resisting and eradicating pathogenic microorganisms. Based on different immune capacity in piglets, individuals display the resistance and susceptibility to diarrhea caused by C. perfringens type C. Recently, long non-coding RNA (lncRNA) and mRNA have been found to be involved in host immune and inflammatory responses to pathogenic infections. However, little is known about spleen transcriptome information in piglet diarrhea caused by C. perfringens type C. Methods Hence, we infected 7-day-old piglets with C. perfringens type C to lead to diarrhea. Then, we investigated lncRNA and mRNA expression profiles in spleens of piglets, including control (SC), susceptible (SS), and resistant (SR) groups. Results As a result, 2,056 novel lncRNAs and 2,417 differentially expressed genes were found. These lncRNAs shared the same characteristics of fewer exons and shorter length. Bioinformatics analysis identified that two lncRNAs (ALDBSSCT0000006918 and ALDBSSCT0000007366) may be involved in five immune/inflammation-related pathways (such as Toll-like receptor signaling pathway, MAPK signaling pathway, and Jak-STAT signaling pathway), which were associated with resistance and susceptibility to C. perfringens type C infection. This study contributes to the understanding of potential mechanisms involved in the immune response of piglets infected with C. perfringens type C

Comparative analysis of liver transcriptome reveals adaptive responses to hypoxia environmental condition in Tibetan chicken

Objective Tibetan chickens, which have unique adaptations to extreme high-altitude environments, exhibit phenotypic and physiological characteristics that are distinct from those of lowland chickens. However, the mechanisms underlying hypoxic adaptation in the liver of chickens remain unknown. Methods RNA-sequencing (RNA-Seq) technology was used to assess the differentially expressed genes (DEGs) involved in hypoxia adaptation in highland chickens (native Tibetan chicken [HT]) and lowland chickens (Langshan chicken [LS], Beijing You chicken [BJ], Qingyuan Partridge chicken [QY], and Chahua chicken [CH]). Results A total of 352 co-DEGs were specifically screened between HT and four native lowland chicken breeds. Gene ontology and Kyoto encyclopedia of genes and genomes enrichment analyses indicated that these co-DEGs were widely involved in lipid metabolism processes, such as the peroxisome proliferator-activated receptors (PPAR) signaling pathway, fatty acid degradation, fatty acid metabolism and fatty acid biosynthesis. To further determine the relationship from the 352 co-DEGs, protein-protein interaction network was carried out and identified eight genes (ACSL1, CPT1A, ACOX1, PPARC1A, SCD, ACSBG2, ACACA, and FASN) as the potential regulating genes that are responsible for the altitude difference between the HT and other four lowland chicken breeds. Conclusion This study provides novel insights into the molecular mechanisms regulating hypoxia adaptation via lipid metabolism in Tibetan chickens and other highland animals

Utilization of Polypropylene Film as an Adhesive to Prepare Formaldehyde-free, Weather-resistant Plywood-like Composites: Process Optimization, Performance Evaluation, and Interface Modification

To develop formaldehyde-free wood-based composites, plywood-like composites (WV/PPF) were prepared using wood veneer (WV) with polypropylene film (PPF) as a novel formaldehyde-free, water-resistant adhesive. To prepare WV/PPF, the effects of hot-pressing conditions (temperature, 165 to 195 °C; pressure, 0.9 to 1.3 MPa; duration, 40 to 70 s/mm; and adhesive dosage between adjacent WVs, 100 to 200 g/m2) were investigated. Results showed that conditions at 180 °C, 0.9 MPa, 70 s/mm, and 150 g/m2 gave WV/PPF desirable physical-mechanical properties. Then, WV/PPF was compared with plywood-like composites using, respectively, polyethylene film (PEF), urea-formaldehyde resin (UFR), and phenol-formaldehyde resin (PFR) as adhesives. Results showed that the physical-mechanical properties of WV/PPF were favored over WV/PEF and WV/UFR, and were comparable to those of WV/PFR. Maleic anhydride grafted polypropylene (MAPP) or γ-aminopropyltriethoxysilane (APTES) surface modification of WV was performed to enhance the interface compatibility of WV/PPF. Results showed that the physical-mechanical properties of modified WV/PPF were favored over those of WV/PFR; MAPP modification was better for shear properties, while APTES modification was better for dimensional stability and flexural properties. Overall, the environmental and technological benefits demonstrated the potential of WV/PPF as a novel construction and building material

Tensile Properties of Bamboo Fiber-reinforced Polypropylene Composites Modified by Impregnation with Calcium Carbonate Nanoparticles

Tensile properties of bamboo fiber (BF)/polypropylene (PP) composites were investigated for different impregnation modification processes. The surface morphology of BF and the fracture morphology of the BF/PP composites were examined by scanning electron microscopy (SEM). Images showed that CaCO3 nanoparticles (nano-CaCO3) adhered to the fiber surfaces. Tension tests of individual bamboo fibers (IBFs) and the BF/PP composites were conducted. The results indicated that the tensile strength (TS), modulus of elasticity (MOE), and elongation at break (EAB) of IBFs increased by 16.0%, 22.2%, and 5.2%, respectively, while those of the BF/PP composites increased by 3.0%, 7.0%, and 15.8%, respectively, compared to the control samples. Various process parameters during the impregnation with nano-CaCO3 had marked effects on the tensile properties of the composites. The optimal conditions for BF-reinforced PP composites by impregnation modification were determined to be a nano-CaCO3 concentration of 1.0×10-2 g/mL, an ethylenediamine tetraacetic acid disodium salt (EDTA-2Na) additive concentration of 8.5×10-4 g/mL, and an impregnation time of 25 min

OPTIMIZATION FOR THE LIQUEFACTION OF MOSO BAMBOO IN PHENOL USING RESPONSE SURFACE METHODOLOGY

Bamboo liquefaction is a key process during bamboo high-value utilization, such as bamboobased nano-carbon fiber manufacturing. Liquefaction parameters have direct effects on the performance of final products. The impact of mass ratio of phenol/bamboo (P/B) powder, temperature, and liquefaction time during moso bamboo liquefaction was studied. All these parameters were studied to perform experiments based on response surface methodology (RSM). Residue content was calculated to evaluate the efficiency of moso bamboo liquefaction. Mathematical models were developed to establish the relationship between the liquefaction parameters and residue content. The results showed that within certain limits the residue content  decreased with the increase of P/B and temperature; however, a further increase of P/B and temperature caused the residue content to increase. In the selected range of liquefaction time in this study, the residue content decreased with the increase of liquefaction time. The optimized combination of liquefaction parameters was 4.5, 163°C, and 46 min for P/B, temperature, and liquefaction time, respectively. The optimized result of residue content from RSM was 7.41934E-008 (%), which meant the bamboo almost completely liquefied. Because of the reasonable error of experiment, the optimized result of residue content from the confirmation experiment was 0.06%.

Gluing Techniques on Bond Performance and Mechanical Properties of Cross-Laminated Timber (CLT) Made from Larix kaempferi

Previous studies have proved that Larix kaempferi is a good material for preparing cross-laminated timber (CLT), but under bending shear stress, CLT made by Larix kaempferi is prone to the phenomenon of bonding face cracking, which seriously affects the shear performance of CLT. To solve this problem, this paper took Larix kaempferi as raw material, conducted experiments on the surface sanding conditions, gluing pressure and adhesive types of sawing timber, and explored the influence of these three factors on the bonding quality of CLT. The microscopic characteristics of the bonding layer were further studied. The results showed that for Larix kaempferi with a density of 0.68 g/cm3 used in this experiment, a high bonding pressure is required. Among the three cold curing adhesives selected in the experiment, emulsion polymer isocyanate (EPI) adhesive needs 1.5 MPa bonding pressure to ensure the bonding quality, while for polyurethane (PUR) and phenol resorcinol formaldehyde (PRF), 1.2 MPa can meet the need of adhesive pressure. This is concerned with the permeability of different adhesives under different pressures. The microscopic results of the bonding layer show that EPI adhesives have poor permeability, so it requires high bonding pressure. The influence of sanding surface of different sand-belt on block shear strength (BSS) and wood failure percentage (WFP) is not obvious, while the durability of bonding layer is better when sanding mesh number is 100. Hence, a high pressure should be used for CLT industrial production when the laminate density is higher, especially when the adhesive has poor permeability. Reasonable sanding surface treatment can be used in laminate surface treatment to improve the durability of CLT

An Information Entropy-Based Modeling Method for the Measurement System

Measurement is a key method to obtain information from the real world and is widely used in human life. A unified model of measurement systems is critical to the design and optimization of measurement systems. However, the existing models of measurement systems are too abstract. To a certain extent, this makes it difficult to have a clear overall understanding of measurement systems and how to implement information acquisition. Meanwhile, this also leads to limitations in the application of these models. Information entropy is a measure of information or uncertainty of a random variable and has strong representation ability. In this paper, an information entropy-based modeling method for measurement system is proposed. First, a modeling idea based on the viewpoint of information and uncertainty is described. Second, an entropy balance equation based on the chain rule for entropy is proposed for system modeling. Then, the entropy balance equation is used to establish the information entropy-based model of the measurement system. Finally, three cases of typical measurement units or processes are analyzed using the proposed method. Compared with the existing modeling approaches, the proposed method considers the modeling problem from the perspective of information and uncertainty. It focuses on the information loss of the measurand in the transmission process and the characterization of the specific role of the measurement unit. The proposed model can intuitively describe the processing and changes of information in the measurement system. It does not conflict with the existing models of the measurement system, but can complement the existing models of measurement systems, thus further enriching the existing measurement theory