Impact of environmental factors on stilbene biosynthesis

Stilbenes are a small family of polyphenolic secondary metabolites that can be found in several distantly related plant species. These compounds act as phytoalexins, playing a crucial role in plant defense against phytopathogens, as well as being involved in the adaptation of plants to abiotic environmental factors. Among stilbenes, trans-resveratrol is certainly the most popular and extensively studied for its health properties. In recent years, an increasing number of stilbene compounds were subjected to investigations concerning their bioactivity. This review presents the most updated knowledge of the stilbene biosynthetic pathway, also focusing on the role of several environmental factors in eliciting stilbenes biosynthesis. The effects of ultraviolet radiation, visible light, ultrasonication, mechanical stress, salt stress, drought, temperature, ozone, and biotic stress are reviewed in the context of enhancing stilbene biosynthesis, both in planta and in plant cell and organ cultures. This knowledge may shed some light on stilbene biological roles and represents a useful tool to increase the accumulation of these valuable compounds

Rastreabilidade em cadeias agroindustriais: conceitos e aplicações.

bitstream/CNPDIA-2009-09/11845/1/CiT33_2006.pd

Mine clay washing residues as a source for alkali-activated binders

The aim of this paper is to promote the use of mine clay washing residues for the preparation of alkali activated materials (AAMs). In particular, the influence of the calcination temperature of the clayey by-product on the geopolymerization process was investigated in terms of chemical stability and durability in water. The halloysitic clay, a mining by-product, has been used after calcination and mixed with an alkaline solution to form alkali activated binders. Attention was focused on the influence of the clay’s calcination treatment (450–500–600◦C) on the geopolymers’ microstructure of samples, remaining in the lower limit indicated by the literature for kaolinite or illite calcination. The mixtures of clay and alkali activators (NaOH 8M and Na-silicate) were cured at room temperature for 28 days. The influence of solid to liquid ratio in the mix formulation was also tested in terms of chemical stability measuring the pH and the ionic conductivity of the eluate after 24-h immersion time in water. The results reported values of ionic conductivity higher for samples made with untreated clay or with low temperature of calcination (≥756 mS/m) compared with values of samples made with calcined clay (292 mS/m). This result suggests that without a proper calcination of the as-received clay it was not possible to obtain 25◦C-consolidated AAMs with good chemical stability and dense microstructure. The measures of integrity test, pH, and ionic conductivity in water confirmed that the best sample is made with calcined clay at 600◦C, being similar (53% higher ionic conductivity of the eluate) or equal (integrity test and pH) to values recorded for the metakaolin-based geopolymer considered the reference material. These results were reflected in term of reticulation and morphology of samples through the analysis with scanning electron microscope (SEM) and X-ray diffraction (XRD), which show a dense and homogeneous microstructure predominantly amorphous with minor amounts of quartz, halloysite, and illite crystalline phases. Special attention was dedicated to this by-product to promote its use, given that kaolinite (and metakaolin), as primary mineral product, has a strong impact on the environment. The results obtained led us to consider this halloysite clay very interesting as an aluminosilicate precursor, and extensively deepening its properties and reactivity for the alkaline activation. In fact, the heart of this work is to study the possibility of reusing this by-product of an industrial process to obtain more sustainable high-performance binders

APPLICATION OF HEATING MICROSCOPY ON SINTERING AND MELTING BEHAVIOUR OF NATURAL SANDS OF ARCHAEOLOGICAL INTEREST

In antiquity, beach sand was one of the main raw materials for glass-making and for the production of other vitreous materials, like Egyptian blue and faience. During the 1st century AD, glass and pigments manufacturing industry was active along the Gulf of Naples, Italy, where we sampled four littoral sands. Samples were analyzed with different techniques: chemical analysis was performed by means of X-Ray Fluorescence (XRF) and mineralogical analyses with X-Ray Powder Diffraction (XRPD) and Raman Spectroscopy. The complete sintering to melting thermal behaviour of the four sands was studied by heating microscopy or hot-stage microscope (HSM) equipped with an high resolution camera capable to collect sample profile during heating. The effect of the grain size on the sintering curves, which were automatically elaborated by specimen profile transformation, was also investigated. Finally, some deductions about the granulometry effect and the presence of alkaline and alkaline-earth oxides on sintering and melting behaviour were drawn. All the four sands were found suitable for highly sintered manufacts rather than glasses, to reach complete amorphous materials the addition of fluxes was necessary

Synthesis of Cu-containing Diopside through a One-Step Crystallization

The incorporation of copper into pyroxene structure was investigated through the melt quenching technique and one-step crystallization procedure. Two series of glasses have been studied, one set with Ca=Mg and another set with Ca>Mg in diopside formula Cux(Ca Mg)2-xSi2O6. The glasses were nucleated by TiO2, Cr2O3, or CaF2 additions as nucleating agents to variably control the phases produced. X-ray diffraction (XRD), scanning electron microscopy, and energy-dispersive X-ray spectroscopy (EDX) were used to characterize the obtained samples. The heat treatment studied at 700, 800, 900 and 1000 °C for 2 h produced green and dark green glasses based on Cu-containing diopside. Various crystalline wollastonite, cuprite, tenorite, cristobalite, quartz, and fluorite phases were developed with different ratios combined with diopside formation depending on the heat treatment and nucleating agents used. As the heat treatment increased in temperature, the crystallized fraction increased with the development of nano-aggregates and the observed reticulated textures confirmed a radical change in the euhedral crystals. This emphasizes that the Cu-containing diopside can be created by a facile one step process. These compositions may find some applications in biological and optical fields

Preparation of low-cost nano and microcomposites from chicken eggshell, nano-silica and rice husk ash and their utilisations as additives for producing geopolymer cements

This work aims to prepare low-cost nanocomposite and microcomposite with lower molar ratio CaO/SiO2 (0.4). Nano-silica, rice husk ash and calcined chicken eggshell have been used as silica and calcium sources. Metakaolin has been separately replaced by 0, 10 and 20 wt% of each composite in order to study their behavior on the properties of geopolymers. The hardener used is sodium waterglass from rice husk ash. The surface area of nano-silica and rice husk ash was 54.40 and 4.08 m2/g, respectively. The cumulative volumes of the control geopolymer, the ones containing 10 wt% of microcomposite and nanocomposite are 119.71, 89.92 and 110.49 mm3/g, respectively. The compressive strength of the control specimen is around 64.02 MPa. The one using 10 wt% of microcomposite was 68.97 MPa. It drops to 42.88 MPa when metakaolin was replaced by 20 wt % of microcomposite. Whereas the one using 10 wt% of nanocomposite was 30.03 MPa and it decreases to 26.05 MPa when metakaolin was substituted by 20 wt% of nanocomposite. It can be concluded that 10 wt% of microcomposite could be mixed to metakaolin for strength development and nanocomposite does not recommend to use as an additive for producing high strength of geopolymer cements. © 2020, © 2020 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group

Low temperature degradation behaviour of 10Ce-TZP/Al2O3 bioceramics obtained by microwave sintering technology

Zirconia is one of the most used ceramics, especially for biomedical applications, due to its exceptional mechanical properties. However, it is commonly known that its properties can be diminished owing to a low temperature degradation (LTD). This phenomenon consists on a spontaneous phase transformation, from tetragonal to monoclinic, under certain conditions, which is accelerated when the samples are exposed under high levels of humidity at a temperature range between 20-300 ºC. In addition to the fact that the monoclinic phase presents worse mechanical properties than the tetragonal one, there is a volume change of 4% between phases that gives rise to defects in the material as microcracks. Due to this reason, zirconia prostheses failed catastrophically inside the human body between 1999 and 2001 (1). Previous researches reveal that Al2O3 addition suppress the propagation of phase transformation (2). Thus, the aim of the present work is to study the hydrothermal ageing of zirconia doped with ceria and toughened with alumina (10Ce-TZP/Al2O3) composite, which has been sintered by microwave employing two different frequencies: 2.45 and 5.8 GHz. Microwave heating technology is based on the absorption of electromagnetic radiation by the material, which allows the sample to be heated. So far, most microwave heating equipments use 2.45 GHz; accordingly, the novelty of this study is to employ a frequency of 5.8 GHz and to investigate its effect on LTD. LTD is carried out in an autoclaved in steam at 120 ºC and 1.2 bar, because these conditions accelerate the hydrothermal aging process (3). In order to characterize the degraded samples, micro-Raman spectroscopy, AFM, nanoindentation technique and electronic microscopy have been performed. References 1. Norton, M. R., Yarlagadda, R., Anderson, G. H. J. Bone Joint Surg. Br., 2002, 84–B, 631–635. 2. Fabbri, P., Piconi, C., Burresi, E., Magnani, G., Mazzanti, F., Mingazzini, C. Dent. Mater., 2014. 3. Presenda, Á., Salvador, M. D., Moreno, R., Borrell, A. J. Am. Ceram. Soc., 2015, 98, 3680–3689

Photogenerated Carriers in SrTiO3 Probed by Mid-Infrared Absorption

Infrared absorption spectra of SrTiO$_3$ have been measured under above-band-gap photoexcitations to study the properties of photogenerated carriers, which should play important roles in previously reported photoinduced phenomena in SrTiO$_3$. A broad absorption band appears over the entire mid-infrared region under photoexcitation. Detailed energy, temperature, and excitation power dependences of the photoinduced absorption are reported. This photo-induced absorption is attributed to the intragap excitations of the photogenerated carriers. The data show the existence of a high density of in-gap states for the photocarriers, which extends over a wide energy range starting from the conduction and valence band edges.Comment: 5 pages, 5 figures, submitted to J. Phys. Soc. Jp