Linear Segmented Arc-Shaped Piezoelectric Branch Beam Energy Harvester for Ultra-Low Frequency Vibrations

Data Availability Statement: Data could be provided upon request to the corresponding author.Piezoelectric energy harvesting systems have been drawing the attention of the research community over recent years due to their potential for recharging/replacing batteries embedded in low-power-consuming smart electronic devices and wireless sensor networks. However, conventional linear piezoelectric energy harvesters (PEH) are often not a viable solution in such advanced practices, as they suffer from a narrow operating bandwidth, having a single resonance peak present in the frequency spectrum and very low voltage generation, which limits their ability to function as a standalone energy harvester. Generally, the most common PEH is the conventional cantilever beam harvester (CBH) attached with a piezoelectric patch and a proof mass. This study investigated a novel multimode harvester design named the arc-shaped branch beam harvester (ASBBH), which combined the concepts of the curved beam and branch beam to improve the energy-harvesting capability of PEH in ultra-low-frequency applications, in particular, human motion. The key objectives of the study were to broaden the operating bandwidth and enhance the harvester’s effectiveness in terms of voltage and power generation. The ASBBH was first studied using the finite element method (FEM) to understand the operating bandwidth of the harvester. Then, the ASBBH was experimentally assessed using a mechanical shaker and real-life human motion as excitation sources. It was found that ASBBH achieved six natural frequencies within the ultra-low frequency range (<10 Hz), in comparison with only one natural frequency achieved by CBH within the same frequency range. The proposed design significantly broadened the operating bandwidth, favouring ultra-low-frequency-based human motion applications. In addition, the proposed harvester achieved an average output power of 427 μW at its first resonance frequency under 0.5 g acceleration. The overall results of the study demonstrated that the ASBBH design can achieve a broader operating bandwidth and significantly higher effectiveness, in comparison with CBH.Southern Cross University, Australia

Remote sensing of water waves: wave flume experiments on regular and irregular waves

Laser scanning technology is a form of remote sensing which has shown, in feasibility studies, that a water surface can be measured rapidly and accurately without in-situ sensors. The adoption of a terrestrial laser scanner (TLS) for wave measurements is an innovative use of state-of-the-art technology usually employed for surveying and high precision surface modelling. An experimental setup for the measurement of waves in a wave flume is detailed and the results of remote sensing of wave parameters are described. The experiment conducted involves a unique method for measuring wave parameters such as wave height, wave period and wavelength. The experiments function as a source of reliable laboratory controlled data, however it also provides a platform for the development of laser scanning technology for field measurements.Griffith Sciences, Griffith School of EngineeringFull Tex

The role of intratidal oscillations in sediment resuspension in a diurnal, partially mixed estuary

Using detailed observations of the mean and turbulent properties of flow, salinity and turbidity that spanned 2001/02, we examined the physical mechanisms underpinning sediment resuspension in the low-energy Swan River estuary, Western Australia. In this diurnal tidally-dominated estuary, the presence of intratidal oscillations, a tidal inequality lasting 2 to 3 hours on the flood tide, generated by interactions of the four main diurnal and semidiurnal astronomical constituents, K₁, O₁, M₂, and S₂, played a major role in modifying vertical stratification and mixing. These intratidal oscillations are controlled by phase differences between the tropic and synodic months rather than being temporally-fixed by bed friction, as occurs in semidiurnal estuaries. Intratidal oscillations are largest, at around 0.1 m, near to the Austral solstice when the lunar and solar declination are in-phase. Despite the seemingly small change in water level, shear-induced interfacial mixing caused destratification of the water column with the top-to-bottom salinity (ΔS) difference of 3.5 present early in the flood tide eroded to less than 0.3 by the end of the intratidal oscillation. High turbidity peaks, of 250 nephelometric turbidity units, coincided with these intratidal oscillations and could not be explained by bed friction since shear stress from mean flow did not exceed threshold criteria. High Reynolds stresses of ∼1 Nm⁻² did, however, exceed τcr and together with negative Reynolds fluxes indicate a net downward transport of material. Destratification of the water column induced by shear instabilities resulted in large overturns capable of moving in situ material towards the bed during intratidal oscillations and these turbidities were ∼10 times greater than those from bed-generated resuspension observed later during the flood tide

Loss of ACTN3 gene function alters mouse muscle metabolism and shows evidence of positive selection in humans

More than a billion humans worldwide are predicted to be completely deficient in the fast skeletal muscle fiber protein α-actinin-3 owing to homozygosity for a premature stop codon polymorphism, R577X, in the ACTN3 gene. The R577X polymorphism is associ

Red hot frogs:Identifying the Australian frogs most at risk of extinction

More than a third of the world’s amphibian species are listed as Threatened or Extinct, with a recent assessment identifying 45 Australian frogs (18.4% of the currently recognised species) as ‘Threatened’ based on IUCN criteria. We applied structured expert elicitation to 26 frogs assessed as Critically Endangered and Endangered to estimate their probability of extinction by 2040. We also investigated whether participant experience (measured as a self-assigned categorical score, i.e. ‘expert’ or ‘non-expert’) influenced the estimates. Collation and analysis of participant opinion indicated that eight species are at high risk (>50% chance) of becoming extinct by 2040, with the disease chytridiomycosis identified as the primary threat. A further five species are at moderate–high risk (30–50% chance), primarily due to climate change. Fourteen of the 26 frog species are endemic to Queensland, with many species restricted to small geographic ranges that are susceptible to stochastic events (e.g. a severe heatwave or a large bushfire). Experts were more likely to rate extinction probability higher for poorly known species (those with <10 experts), while non-experts were more likely to rate extinction probability higher for better-known species. However, scores converged following discussion, indicating that there was greater consensus in the estimates of extinction probability. Increased resourcing and management intervention are urgently needed to avert future extinctions of Australia’s frogs. Key priorities include developing and supporting captive management and establishing or extending in-situ population refuges to alleviate the impacts of disease and climate change

Using viral vectors as gene transfer tools (Cell Biology and Toxicology Special Issue: ETCS-UK 1 day meeting on genetic manipulation of cells)

In recent years, the development of powerful viral gene transfer techniques has greatly facilitated the study of gene function. This review summarises some of the viral delivery systems routinely used to mediate gene transfer into cell lines, primary cell cultures and in whole animal models. The systems described were originally discussed at a 1-day European Tissue Culture Society (ETCS-UK) workshop that was held at University College London on 1st April 2009. Recombinant-deficient viral vectors (viruses that are no longer able to replicate) are used to transduce dividing and post-mitotic cells, and they have been optimised to mediate regulatable, powerful, long-term and cell-specific expression. Hence, viral systems have become very widely used, especially in the field of neurobiology. This review introduces the main categories of viral vectors, focusing on their initial development and highlighting modifications and improvements made since their introduction. In particular, the use of specific promoters to restrict expression, translational enhancers and regulatory elements to boost expression from a single virion and the development of regulatable systems is described