UA3/3/1 Analysis of the Demand for Married Student Housing at WKU, 1966-1967

The purpose of this study is to bring forth relevant information needed to determine the feasibility of an investment project for a married student housing complex on the campus of Western Kentucky University. Only the demand side of the market is analyzed; a potential investor will have the construction and land costs for such an enterprise at his disposal. With the information presented in this study it is hoped that a decision to construct a housing complex will be forthcoming. The study group attempted to present information that will allow a potential investor to make an intelligent decision as to the profitability of the investment. It is hoped that the critical questions concerning the investment have been answered by this study. The time period in which the study was carried out was January, 1967 to June, 1967, i.e., the second semester of the 1966-67 school year. The information presented was obtained from a single sample of the married population. Seventy married family units (8.4 percent of the population) were stratified according to class standing (Freshman, Sophomore, Junior, Senior, and Graduate) and then picked randomly within the class stratifications. A more desirable method would have been a sequential sampling method, but the time and expense of the method did not allow its use. Future studies can be carried out in order to substantiate the data presented at this time. The estimated size of the investment would seem to warrant at least one more comprehensive examination of the market in order that a more exact market character can be determined. The study group contacted state institutions that have married housing units in order to see if any useful information could be obtained from their experience in the determination of market character and size of their married students. None of the schools contacted had conducted a market study prior to the construction of such a housing unit. Discovering this factor did not disturb the study group. It was assumed that the market character at the various educational institutions would be significantly different with reference to income, rent, family size, etc., that no useful comparison could be made. The reason for this assumption rests on the fact that the educational institutions differ in such things as type and size of the graduate program and community size and industrial development. These factors have a direct influence on the family unit\u27s income, numbers, and the rate of growth of the married student body. The purpose of contacting the various institutions was to examine the methodology used in the study of the market for married student housing

Minimally Invasive Posterior Facet Decortication and Fusion Using Navigated Robotic Guidance: Feasibility and Workflow Optimization

Minimally invasive spine surgery reduces tissue dissection and retraction, decreasing the morbidity associated with traditional open spine surgery by decreasing blood loss, blood transfusion, complications, and pain. One of the key challenges with a minimally invasive approach is achieving consistent posterior fusion. Although advantageous in all fusion surgeries, solid posterior fusion is particularly important in spinal deformity, revisions, and fusions without anterior column support. A minimally invasive surgical approach accomplished without sacrificing the quality of the posterior fusion has the potential to decrease both short- and long-term complications compared to the traditional open techniques. Innovations in navigated and robotic-assisted spine surgery continue to address this need. In this article, we will outline the feasibility of achieving posterior facet fusion using the Mazor X Stealth Edition Robotic Guidance System

ATC-114 Next-Generation Hysteretic Relationships for Performance-based Modeling and Analysis

Nonlinear analysis has become an increasingly useful and important tool for evaluation, upgrade and design of structures for seismic resistance. However, despite steady improvements in analysis capability, most practice remains anchored to guidelines developed more than 20 years ago. Under its ATC- 114 project, the Applied Technology Council is developing updated hysteretic envelope models for use in seismic analysis of new and existing buildings. The intent of this project is to support the development of updated building code criteria contained in such standards as ASCE 7 and ASCE 41. Project support is provided by the National Institute of Standards and Technology

The emergence of modern statistics in agricultural science : Analysis of variance, experimental design and the reshaping of research at Rothamsted Experimental Station, 1919–1933

During the twentieth century statistical methods have transformed research in the experimental and social sciences. Qualitative evidence has largely been replaced by quantitative results and the tools of statistical inference have helped foster a new ideal of objectivity in scientific knowledge. The paper will investigate this transformation by considering the genesis of analysis of variance and experimental design, statistical methods nowadays taught in every elementary course of statistics for the experimental and social sciences. These methods were developed by the mathematician and geneticist R. A. Fisher during the 1920s, while he was working at Rothamsted Experimental Station, where agricultural research was in turn reshaped by Fisher’s methods. Analysis of variance and experimental design required new practices and instruments in field and laboratory research, and imposed a redistribution of expertise among statisticians, experimental scientists and the farm staff. On the other hand the use of statistical methods in agricultural science called for a systematization of information management and made computing an activity integral to the experimental research done at Rothamsted, permanently integrating the statisticians’ tools and expertise into the station research programme. Fisher’s statistical methods did not remain confined within agricultural research and by the end of the 1950s they had come to stay in psychology, sociology, education, chemistry, medicine, engineering, economics, quality control, just to mention a few of the disciplines which adopted them

Surgical Decision Making for Unstable Thoracolumbar Spine Injuries: Results of a Consensus Panel Review by the Spine Trauma Study Group

Objectives: The optimal surgical approach and treatment of unstable thoracolumbar spine injuries are poorly defined owing to a lack of widely accepted level I clinical literature. This lack of evidence based standards has led to varied practice patterns based on individual surgeon preferences. The purpose of this study was to survey the leaders in the field of spine trauma to define the major characteristics of thoracolumbar injuries that influence their surgical decision making. In the absence of good scientific data, expert consensus opinions may provide surgeons with a practical framework to guide therapy and to conduct future research. Methods: A panel of 22 leading spinal surgeons from 20 level I trauma centers in seven countries met to discuss the indications for surgical approach selection in unstable thoracolumbar injuries. Injuries were presented to the surgeons in a case scenario survey format. Preferred surgical approaches to the clinical scenarios were tabulated and comments weighed. Results: All members of the panel agreed that three independent characteristics of thoracolumbar injuries carry primary importance in surgical decision making: the injury morphology, the neurologic status of the patient, and the integrity of the posterior ligaments. Six clinical scenarios based on the neurologic status of the patient (intact, incomplete, or complete) and on the status of the posterior ligamentous complex (intact or disrupted) were created, and consensus treatment approaches were described. Additional circumstances capable of altering the treatments were acknowledged. Conclusions: Decision making for the surgical treatment of thoracolumbar injuries is largely dependent on three patient characteristics: injury morphology, neurologic status, and posterior ligament integrity. A logical and practical decision-making process based on these characteristics may guide treatment even for the most complicated fracture patterns

The Sub-axial Cervical Spine Injury Classification System (SLIC): A Novel Approach to Recognize The Importance of Morphology, Neurology and Integrity of the Disco-ligamentous complex

Abstract Background Context Despite technological advances in spine surgery, classification of sub-axial cervical spine injuries remains largely descriptive, lacking standardization and any relationship to prognosis or clinical decision making. Purpose The primary purpose of this paper is to define a classification system for sub-axial cervical spine trauma that conveys information about injury pattern and severity as well as treatment considerations and prognosis. The proposed system is designed to be both comprehensive and easy to use. The secondary objective is to evaluate the classification system in the basic principles of classification construction, namely reliability and validity. Study Design/Setting Derivation of the classification was from a synthesis of the best cervical classification parameters gleaned from an exhaustive literature review and expert opinion of experienced spine surgeons. Multi-center reliability and validity study of a cervical classification system using previously collected CT, MRI, and plain film x-ray images of sub-axial cervical trauma. Methods Important clinical and radiographic variables encountered in sub-axial cervical trauma were identified by a working section of the Spine Trauma Study Group (STSG). Significant limitations of existing injury classification systems were defined and addressed within the new system. It was then introduced to the STSG and applied to 11 cervical trauma cases selected to represent a spectrum of subaxial injury. Six weeks later, the cases were randomly re-ordered and again scored using the novel classification system. Twenty surgeons completed both intervals. Inter-rater and intra-rater reliability and several forms of validity were assessed. For comparison, the reliability of both the Harris and the Ferguson & Allen systems were also evaluated. Results Each of three main categories (injury morphology; disco-ligamentous complex integrity; and neurological status) identified as integrally important to injury description, treatment, and prognosis was assigned an ordinal score range, weighted according to its perceived contribution to overall injury severity. A composite injury severity score was modeled by summing the scores from all three categories. Treatment options were assigned based upon threshold values of the severity score. Inter-rater agreement as assessed by ICC of the DLC, Morphology, and Neurological Status scores was 0.49, 0.57, and 0.87, respectively. Intra-rater agreement as assessed by ICC of the DLC, Morphology, and Neurological Status scores was 0.66, 0.75, and 0.90, respectively. Raters agreed with treatment recommendations of the algorithm in 93.3 % of cases, suggesting high construct validity. The reliability if the SLIC treatment algorithm compared favorably to the earlier classification systems of Harris and Ferguson & Allen. Conclusions The Sub-axial Injury Classification (SLIC) and Severity Scale provides a comprehensive classification system for sub-axial cervical trauma, incorporating pertinent characteristics for generating prognoses and courses of management. Early data on validity and reliability are encouraging. Further testing is necessary before introducing the SLIC score into clinical practice

Freehand Juxtapedicular Screws Placed in the Apical Concavity of Adult Idiopathic Scoliosis Patients: Technique, Computed Tomography Confirmation, and Radiographic Results

Objective The purpose of this study is to highlight our technique for freehand placement of juxtapedicular screws along with intraoperative computed tomography (CT) and radiographic results. Methods Consecutive patients with adult idiopathic scoliosis undergoing primary surgery by the senior author were identified. All type D (absent/slit like channel) pedicles were identified on preoperative CT. Three-dimensional visualization software was used to measure screw angulation and purchase. Radiographs were measured by a fellowship trained spine surgeon. The freehand technique was used to place all screws in a juxtapedicular fashion without any fluoroscopic, radiographic, navigational or robotic assistance. Results Seventy-three juxtapedicular screws were analyzed. The most common level was T7 (9 screws) on the left and T5 (12 screws) on the right. The average medial angulation was 20.7° (range, 7.1°–36.3°), lateral vertebral body purchase was 13.4 mm (range, 0–28.9 mm), and medial vertebral body purchase was 21.1 mm (range, 8.9–31.8 mm). More than half (53.4%) of the screws had bicortical purchase. Two screws were lateral on CT scan, defined by the screw axis lateral to the lateral vertebral body cortex. No screws were medial. There was a difference in medial angulation between screws with (n = 58) and without (n = 15) lateral body purchase (22.0±4.9 vs. 15.5±4.5, p < 0.001). Three of 73 screws were repositioned after intraoperative CT. There were no neurovascular complications. The mean coronal cobb corrections for main thoracic and lumbar curves were 83.0% and 80.5%, respectively, at an average of 17.5 months postoperative. Conclusion Freehand juxtapedicular screw placement is a safe technique for type D pedicles in adult idiopathic scoliosis patients