A hard X-ray polarimeter designed for transient astrophysical sources

— This paper discusses the latest progress in the development of GRAPE (Gamma-Ray Polarimeter Experiment), a hard X-ray Compton Polarimeter. The purpose of GRAPE is to measure the polarization of hard X-rays in the 50-300 keV energy range. We are particularly interested in X-rays that are emitted from solar flares and gamma-ray bursts (GRBs). Accurately measuring the polarization of the emitted radiation from these sources will lead, to a better understating of both the emission mechanisms and source geometries. The GRAPE design consists of an array of plastic scintillators surrounding a central high-Z crystal scintillator. We can monitor individual Compton scatters that occur in the plastics and determine whether the photon is photo absorbed by the high-Z crystal or not. A Compton scattered photon that is immediately photo absorbed by the high-Z crystal constitutes a valid event. These valid events provide us with the interaction locations of each incident photon and ultimately produces a modulation pattern for the Compton scattering of the polarized radiation. Comparing with Monte Carlo simulations of a 100% polarized beam, the level of polarization of the measured beam can then be determined. The complete array is mounted on a flat-panel multi-anode photomultiplier tube (MAPMT) that can measure the deposited energies resulting from the photon interactions. The design of the detector allows for a large field-ofview (\u3e π steradian), at the same time offering the ability to be close-packed with multiple modules in order to reduce deadspace. We plan to present in this paper the latest laboratory results obtained from GRAPE using partially polarized radiation sources

Plans for the first balloon flight of the gamma-ray polarimeter experiment (GRAPE)

We have developed a design for a hard X-ray polarimeter operating in the energy range from 50 to 500 keV. This modular design, known as GRAPE (Gamma-Ray Polarimeter Experiment), has been successfully demonstrated in the lab using partially polarized gamma-ray sources and using fully polarized photon beams at Argonne National Laboratory. In June of 2007, a GRAPE engineering model, consisting of a single detector module, was flown on a high altitude balloon flight to further demonstrate the design and to collect background data. We are currently preparing a much larger balloon payload for a flight in the fall of 2011. Using a large (16-element) array of detector modules, this payload is being designed to search for polarization from known point sources of radiation, namely the Crab and Cygnus X-1. This first flight will not only provide a scientific demonstration of the GRAPE design (by measuring polarization from the Crab nebula), it will also lay the foundation for subsequent long duration balloon flights that will be designed for studying polarization from gamma-ray bursts and solar flares. Here we shall present data from calibration of the first flight module detectors, review the latest payload design and update the predicted polarization sensitivity for both the initial continental US balloon flight and the subsequent long-duration balloon flights

GRAPE: a balloon-borne gamma-ray polarimeter

The Gamma-RAy Polarimeter Experiment (GRAPE) is a concept for an astronomical hard X-ray Compton polarimeter operating in the 50 - 500 keV energy band. The instrument has been optimized for wide-field polarization measurements of transient outbursts from energetic astrophysical objects such as gamma-ray bursts and solar flares. The GRAPE instrument is composed of identical modules, each of which consists of an array of scintillator elements read out by a multi-anode photomultiplier tube (MAPMT). Incident photons Compton scatter in plastic scintillator elements and are subsequently absorbed in inorganic scintillator elements; a net polarization signal is revealed by a characteristic asymmetry in the azimuthal scattering angles. We have constructed a prototype GRAPE module that has been calibrated at a polarized hard X-ray beam and flown on an engineering balloon test flight. A full-scale scientific balloon payload, consisting of up to 36 modules, is currently under development. The first flight, a one-day flight scheduled for 2011, will verify the expected scientific performance with a pointed observation of the Crab Nebula. We will then propose long-duration balloon flights to observe gamma-ray bursts and solar flares

Scintillator gamma-ray detectors with silicon photomultiplier readouts for high-energy astronomy

Space-based gamma-ray detectors for high-energy astronomy face strict constraints of mass, volume, and power, and must endure harsh operating environments. Scintillator materials have a long history of successful operation under these conditions, and new materials offer greatly improved performance in terms of efficiency, time response, and energy resolution. The use of scintillators in space remains constrained, however, by the mass, volume, and fragility of the associated light readout device, typically a vacuum photomultiplier tube (PMT). Recently developed silicon photomultipliers (SiPMs) offer gains and efficiencies similar to those of PMTs, but with greatly reduced mass and volume, high ruggedness, and no high-voltage requirements. We have therefore been investigating the use of SiPM readouts for scintillator gamma-ray detectors, with an emphasis on their suitability for space- and balloonbased instruments for high-energy astronomy. We present our most recent results, including spectroscopy measurements for lanthanum bromide scintillators with SiPM readouts, and pulse-shape discrimination using organic scintillators with SiPM readouts. We also describe potential applications of SiPM readouts to specific highenergy astronomy instrument concepts

Prospects for GRB Polarimetry with GRAPE

This paper discusses the latest progress in the development of GRAPE (Gamma‐Ray Polarimeter Experiment), a hard X‐ray Compton Polarimeter. The purpose of GRAPE is to measure the polarization of hard X‐rays in the 50–300 keV energy range. We are particularly interested in X‐rays that are emitted from solar flares and gamma‐ray bursts (GRBs). Accurately measuring the polarization of the emitted radiation from these sources will lead to a better understating of both the emission mechanisms and source geometries. The GRAPE design consists of an array of plastic scintillators surrounding a central high‐Z crystal scintillator. We can monitor individual Compton scatters that occur in the plastics and determine whether the photon is photo absorbed by the high‐Z crystal or not. A Compton scattered photon that is immediately photo absorbed by the high‐Z crystal constitutes a valid event. These valid events provide us with the interaction locations of each incident photon and ultimately produces a modulation pattern for the Compton scattering of the polarized radiation. Comparing with Monte Carlo simulations of a 100% polarized beam, the level of polarization of the measured beam can then be determined. The complete array is mounted on a flat‐panel multi‐anode photomultiplier tube (MAPMT) that can measure the deposited energies resulting from the photon interactions. The design of the detector allows for a large field‐of‐view (\u3e π steradian), at the same time offering the ability to be close‐packed with multiple modules in order to reduce deadspace. We present in this paper the latest laboratory results obtained from GRAPE using partially polarized radiation sources along with a brief description of our future plans for the GRAPE design

A compton telescope for remote location and identification of radioactive material

The spare detectors from NASA\u27s Compton Gamma-Ray Observatory COMPTEL instrument have been reconfigured to demonstrate the capability at ground level to remotely locate and identify sources of gamma radiation. The gamma-ray experimental telescope assembly (GRETA) employs two 28 cm diameter scintillation detectors separated by 95 cm: one 8.5 cm thick liquid scintillator detector and one 7.5 cm thick NaI(Tl) detector. The assembly electronics and real-time data acquisition system measures the energy deposits and time-of-flight for each coincident detection and compiles histograms of total energy and incident angle as computed using the kinematics of Compton scattering. GRETA\u27s field of view is a cone with full angle approximately 120deg. The sensitive energy range is 0.3 to 2.6 MeV. Energy resolution is ~10% FWHM. The angular resolution is better than 5deg. We have previously reported measurements using a simplified readout configuration that limited GRETA\u27s imaging ability to a rough (~15deg) directional sensitivity. Here we report on measurements using the full (15-channel) readout that can achieve ~1.5-cm position resolution in each scintillator and permits true Compton imaging using COMPTEL software. GRETA has been refurbished to allow for ease of transport and field use with updated real time imaging and identification software. We present most recent laboratory measurements of radioactive sources of concern, 137Cs and 60Co, potential candidates used with radiological dispersal devices

Simulations of a monolithic lanthanum bromide gamma-ray detector

We have been working on the development of a detector design for a large area coded aperture imaging system operating in the 10-600 keV energy range. The detector design is based on an array of Lanthanum Bromide (LaBr3) scintillators, each directly coupled to a Hamamatsu 64-channel multi-anode photomultiplier tube (MAPMT). This paper focuses on the development of the GEANT4-based simulations as an aid in the optimization of the detector design. The simulations have been validated by comparisons with various laboratory data sets. We will summarize the current status and latest findings from this study

Plans for the next GRAPE balloon flight

The Gamma RAy Polarimeter Experiment (GRAPE) was first flown on a 26-hour balloon flight in the fall of 2011. GRAPE consists of an array of Compton polarimeter modules (based on traditional scintillation technologies) designed to operate in the energy range from 50 keV up to 500 keV. The ultimate goal is to operate GRAPE in a wide FoV configuration for the study of gamma-ray bursts. For the first (demonstration) balloon flight, GRAPE was configured in a collimated mode to facilitate observations of known point sources. The Crab nebula/pulsar, the active Sun, and Cygnus X-1 were the primary targets for the first flight. Although the Crab was detected, the polarization sensitivity was worse than expected. This paper will review the plans for the next GRAPE balloon flight, which is scheduled to take place in the fall of 2014 from Ft. Sumner, NM. These plans involve several modifications designed to improve the polarization sensitivity, including an expansion of the array of polarimeter modules from 16 to 24 and improvements to the instrument shielding. Sensitivity estimates of the resulting instrument, based on GEANT4 simulations, will be presented

A fast scintillator Compton telescope for medium-energy gamma-ray astronomy

The field of medium-energy gamma-ray astronomy urgently needs a new mission to build on the success of the COMPTEL instrument on the Compton Gamma Ray Observatory. This mission must achieve sensitivity significantly greater than that of COMPTEL in order to advance the science of relativistic particle accelerators, nuclear astrophysics, and diffuse backgrounds, and bridge the gap between current and future hard X-ray missions and the high-energy Fermi mission. Such an increase in sensitivity can only come about via a dramatic decrease in the instrumental background. We are currently developing a concept for a low-background Compton telescope that employs modern scintillator technology to achieve this increase in sensitivity. Specifically, by employing LaBr3 scintillators for the calorimeter, one can take advantage of the unique speed and resolving power of this material to improve the instrument sensitivity while simultaneously enhancing its spectroscopic and imaging performance. Also, using deuterated organic scintillator in the scattering detector will reduce internal background from neutron capture. We present calibration results from a laboratory prototype of such an instrument, including time-of-flight, energy, and angular resolution, and compare them to simulation results using a detailed Monte Carlo model. We also describe the balloon payload we have built for a test flight of the instrument in the fall of 2010

An imaging neutron/gamma-ray spectrometer

We present the test results of a neutron/gamma-ray imaging spectrometer for the identification and location of radioactive and special nuclear materials. Radioactive materials that could be fashioned into a radiation dispersal device typically emit gamma rays, while fissile materials such as uranium and plutonium emit both neutrons and gamma rays via spontaneous or induced fission. The simultaneous detection of neutrons and gamma rays is a clear indication of the presence of fissile material. The instrument works as a double-scatter telescope, requiring a neutron or gamma ray to undergo an interaction in two detectors to be considered a valid event. While this requirement reduces the detector efficiency, it yields information about the direction and energy of the incident particle, which is then used to reconstruct an image of the emitting source. Because of this imaging capability background events can be rejected, decreasing the number of events required for high confidence detection and thereby greatly improving its sensitivity. The instrument is optimized for the detection of neutrons with energies from 1-20 MeV and gamma rays from 0.4 to 10 MeV. Images and energy spectra for neutron and gamma rays are reported for several sources including depleted uranium and plutonium. In addition, the effect of neutron source shielding is investigated