Meteorological and chemical factors controlling ozone formation in Seoul during MAPS-Seoul 2015

To understand the chemical mechanisms of controlling factors in ozone (O3) formation in early summer in Seoul, a comprehensive study encompassing measurement and modeling was conducted under the Megacity Air Pollution Study-Seoul (MAPS-Seoul) campaign. From May 18 to June 12, 2015, O3 and peroxyacetyl nitrate (PAN) were measured, along with their precursors, including NOx and volatile organic compounds (VOCs), at the Korea Institute of Science and Technology, located in northeast Seoul. VOCs were sampled in a canister twice a day (at 09:30 and 15:00) and analyzed via gas chromatography. The meteorological conditions and chemical regimes of the air masses were clearly distinguished during the study period. In May, NOx concentrations were higher with more pronounced diurnal cycles of precursors and O3 under constant westerly winds. By contrast, stagnant conditions developed in June, which reduced the inflow of primary emissions from the downtown area but increased the influence from the neighboring forest under high temperatures. As a result, the ratio of O3 to odd oxygen was higher in June, indicating a less efficient removal of O3 by NOx. In the same context, the air mass was chemically more aged with a higher NO2/NOx ratio and enhanced OH reactivity of oxygenated and biogenic VOCs in June. The overall measurement results suggest that O3 formation is slightly more sensitive to VOCs than to NOx in Seoul during this season, when O3 concentrations are the highest of the year

Aromatic hydrocarbons as ozone precursors before and after outbreak of the 2008 financial crisis in the Pearl River Delta region, south China

In the second half of 2008 China's highly industrialized Pearl River Delta (PRD) region was hard-hit by the financial crisis (FC). This study reports volatile organic compounds measured in the PRD during November-December in both 2007 before the FC and 2008 after the FC. While total mixing ratios of non-methane hydrocarbons (NMHCs) on average were only about 7% lower from 40.2 ppbv in 2007 to 37.5 ppbv in 2008, their ozone formation potentials (OFPs) dropped about 30%, resulting from about 55% plummet of aromatic hydrocarbons (AHs) against a greater than 20% increase of total alkanes/alkenes. The elevated alkanes and alkenes in 2008 could be explained by greater emissions from vehicle exhausts and LPG combustion due to rapid increase of vehicle numbers and LPG consumption; the drop of AHs could be explained by reduced emissions from industries using AH-containing solvents due to the influence of the FC, as indicated by much lower ratios of toluene to benzene and of xylenes/ trichloroethylene/tetrachloroethylene to carbon monoxide (CO) in 2008. Source apportionment by positive matrix factorization (PMF) also revealed much less contribution of industry solvents to total anthropogenic NMHCs and particularly to toluene and xylenes in 2008 than in 2007. Based on PMF reconstructed source contributions, calculated OFPs by industrial emissions were responsible for 40.8% in 2007 in contrast to 18.4% in 2008. Further investigation into local industry output statistics suggested that the plummet of AHs in 2008 should be attributed to small enterprises, which contributed largely to ambient AHs due to their huge numbers and non-existent emission treatment, but were much more influenced by the FC. © 2012. American Geophysical Union. All Rights Reserved

On nonsupersymmetric \BC^4/\BZ_N, tachyons, terminal singularities and flips

We investigate nonsupersymmetric \BC^4/\BZ_N orbifold singularities using their description in terms of the string worldsheet conformal field theory and its close relation with the toric geometry description of these singularities and their possible resolutions. Analytic and numerical study strongly suggest the absence of nonsupersymmetric Type II terminal singularities (i.e. with no marginal or relevant blowup modes) so that there are always moduli or closed string tachyons that give rise to resolutions of these singularities, although supersymmetric and Type 0 terminal singularities do exist. Using gauged linear sigma models, we analyze the phase structure of these singularities, which often involves 4-dimensional flip transitions, occurring between resolution endpoints of distinct topology. We then discuss 4-dim analogs of unstable conifold-like singularities that exhibit flips, in particular their Type II GSO projection and the phase structure. We also briefly discuss aspects of M2-branes stacked at such singularities and nonsupersymmetric AdS_4\times S^7/\BZ_N backgrounds.Comment: Latex, 43pgs incl. appendices, 2 eps figs, v2. minor clarifications added, to appear in JHE

Rapid production of large-area, transparent and stretchable electrodes using metal nanofibers as wirelessly operated wearable heaters

A rapidly growing interest in wearable electronics has led to the development of stretchable and transparent heating films that can replace the conventional brittle and opaque heaters. Herein, we describe the rapid production of large-area, stretchable and transparent electrodes using electrospun ultra-long metal nanofibers (mNFs) and demonstrate their potential use as wirelessly operated wearable heaters. These mNF networks provide excellent optoelectronic properties (sheet resistance of similar to 1.3 O per sq with an optical transmittance of similar to 90%) and mechanical reliability (90% stretchability). The optoelectronic properties can be controlled by adjusting the area fraction of the mNF networks, which also enables the modulation of the power consumption of the heater. For example, the low sheet resistance of the heater presents an outstanding power efficiency of 0.65 W cm(-2) (with the temperature reaching 250 degrees C at a low DC voltage of 4.5 V), which is similar to 10 times better than the properties of conventional indium tin oxide-based heaters. Furthermore, we demonstrate the wireless fine control of the temperature of the heating film using Bluetooth smart devices, which suggests substantial promise for the application of this heating film in next-generation wearable electronics

Simultaneous non-negative matrix factorization for multiple large scale gene expression datasets in toxicology

Non-negative matrix factorization is a useful tool for reducing the dimension of large datasets. This work considers simultaneous non-negative matrix factorization of multiple sources of data. In particular, we perform the first study that involves more than two datasets. We discuss the algorithmic issues required to convert the approach into a practical computational tool and apply the technique to new gene expression data quantifying the molecular changes in four tissue types due to different dosages of an experimental panPPAR agonist in mouse. This study is of interest in toxicology because, whilst PPARs form potential therapeutic targets for diabetes, it is known that they can induce serious side-effects. Our results show that the practical simultaneous non-negative matrix factorization developed here can add value to the data analysis. In particular, we find that factorizing the data as a single object allows us to distinguish between the four tissue types, but does not correctly reproduce the known dosage level groups. Applying our new approach, which treats the four tissue types as providing distinct, but related, datasets, we find that the dosage level groups are respected. The new algorithm then provides separate gene list orderings that can be studied for each tissue type, and compared with the ordering arising from the single factorization. We find that many of our conclusions can be corroborated with known biological behaviour, and others offer new insights into the toxicological effects. Overall, the algorithm shows promise for early detection of toxicity in the drug discovery process

Direct exfoliation and dispersion of two-dimensional materials in pure water via temperature control

The high-volume synthesis of two-dimensional (2D) materials in the form of platelets is desirable for various applications. While water is considered an ideal dispersion medium, due to its abundance and low cost, the hydrophobicity of platelet surfaces has prohibited its widespread use. Here we exfoliate 2D materials directly in pure water without using any chemicals or surfactants. In order to exfoliate and disperse the materials in water, we elevate the temperature of the sonication bath, and introduce energy via the dissipation of sonic waves. Storage stability greater than one month is achieved through the maintenance of high temperatures, and through atomic and molecular level simulations, we further discover that good solubility in water is maintained due to the presence of platelet surface charges as a result of edge functionalization or intrinsic polarity. Finally, we demonstrate inkjet printing on hard and flexible substrates as a potential application of water-dispersed 2D materials.close1

The Spin of Holographic Electrons at Nonzero Density and Temperature

We study the Green's function of a gauge invariant fermionic operator in a strongly coupled field theory at nonzero temperature and density using a dual gravity description. The gravity model contains a charged black hole in four dimensional anti-de Sitter space and probe charged fermions. In particular, we consider the effects of the spin of these probe fermions on the properties of the Green's function. There exists a spin-orbit coupling between the spin of an electron and the electric field of a Reissner-Nordstrom black hole. On the field theory side, this coupling leads to a Rashba like dispersion relation. We also study the effects of spin on the damping term in the dispersion relation by considering how the spin affects the placement of the fermionic quasinormal modes in the complex frequency plane in a WKB limit. An appendix contains some exact solutions of the Dirac equation in terms of Heun polynomials.Comment: 27 pages, 11 figures; v2: minor changes, published versio

30 inch Roll-Based Production of High-Quality Graphene Films for Flexible Transparent Electrodes

We report that 30-inch scale multiple roll-to-roll transfer and wet chemical doping considerably enhance the electrical properties of the graphene films grown on roll-type Cu substrates by chemical vapor deposition. The resulting graphene films shows a sheet resistance as low as ~30 Ohm/sq at ~90 % transparency which is superior to commercial transparent electrodes such as indium tin oxides (ITO). The monolayer of graphene shows sheet resistances as low as ~125 Ohm/sq with 97.4% optical transmittance and half-integer quantum Hall effect, indicating the high-quality of these graphene films. As a practical application, we also fabricated a touch screen panel device based on the graphene transparent electrodes, showing extraordinary mechanical and electrical performances

Cellulose acetate phthalate, a common pharmaceutical excipient, inactivates HIV-1 and blocks the coreceptor binding site on the virus envelope glycoprotein gp120

BACKGROUND: Cellulose acetate phthalate (CAP), a pharmaceutical excipient used for enteric film coating of capsules and tablets, was shown to inhibit infection by the human immunodeficiency virus type 1 (HIV-1) and several herpesviruses. CAP formulations inactivated HIV-1, herpesvirus types 1 (HSV-1) and 2 (HSV-2) and the major nonviral sexually transmitted disease (STD) pathogens and were effective in animal models for vaginal infection by HSV-2 and simian immunodeficiency virus. METHODS: Enzyme-linked immunoassays and flow cytometry were used to demonstrate CAP binding to HIV-1 and to define the binding site on the virus envelope. RESULTS: 1) CAP binds to HIV-1 virus particles and to the envelope glycoprotein gp120; 2) this leads to blockade of the gp120 V3 loop and other gp120 sites resulting in diminished reactivity with HIV-1 coreceptors CXCR4 and CCR5; 3) CAP binding to HIV-1 virions impairs their infectivity; 4) these findings apply to both HIV-1 IIIB, an X4 virus, and HIV-1 BaL, an R5 virus. CONCLUSIONS: These results provide support for consideration of CAP as a topical microbicide of choice for prevention of STDs, including HIV-1 infection

Heat dissipation in atomic-scale junctions

Atomic and single-molecule junctions represent the ultimate limit to the miniaturization of electrical circuits. They are also ideal platforms to test quantum transport theories that are required to describe charge and energy transfer in novel functional nanodevices. Recent work has successfully probed electric and thermoelectric phenomena in atomic-scale junctions. However, heat dissipation and transport in atomic-scale devices remain poorly characterized due to experimental challenges. Here, using custom-fabricated scanning probes with integrated nanoscale thermocouples, we show that heat dissipation in the electrodes of molecular junctions, whose transmission characteristics are strongly dependent on energy, is asymmetric, i.e. unequal and dependent on both the bias polarity and the identity of majority charge carriers (electrons vs. holes). In contrast, atomic junctions whose transmission characteristics show weak energy dependence do not exhibit appreciable asymmetry. Our results unambiguously relate the electronic transmission characteristics of atomic-scale junctions to their heat dissipation properties establishing a framework for understanding heat dissipation in a range of mesoscopic systems where transport is elastic. We anticipate that the techniques established here will enable the study of Peltier effects at the atomic scale, a field that has been barely explored experimentally despite interesting theoretical predictions. Furthermore, the experimental advances described here are also expected to enable the study of heat transport in atomic and molecular junctions, which is an important and challenging scientific and technological goal that has remained elusive.Comment: supporting information available in the journal web site or upon reques