242,384 research outputs found
Computer program MCAP-TOSS calculates steady-state fluid dynamics of coolant in parallel channels and temperature distribution in surrounding heat-generating solid
Computer program calculates the steady state fluid distribution, temperature rise, and pressure drop of a coolant, the material temperature distribution of a heat generating solid, and the heat flux distributions at the fluid-solid interfaces. It performs the necessary iterations automatically within the computer, in one machine run
Computer program TRACK performs transient and/or steady state thermal analysis with coupled fluid flow and heat conduction
Computer program called TRACK was developed by combining a transient fluid flow computer code and the existing modified TOSS heat conduction code to perform the computation
AUTOTEM - Automated geometry meshing and heat conduction calculation
Temperature distribution for an arbitrary irregular body is calculated by AUTOTEM, which generates required input data automatically by computer. Temperature distribution is calculated for a two-dimensional plane section in /x,y/ coordinates or for an axisymmetric irregular body in /r,z/ coordinates
Bayesian threshold selection for extremal models using measures of surprise
Statistical extreme value theory is concerned with the use of asymptotically
motivated models to describe the extreme values of a process. A number of
commonly used models are valid for observed data that exceed some high
threshold. However, in practice a suitable threshold is unknown and must be
determined for each analysis. While there are many threshold selection methods
for univariate extremes, there are relatively few that can be applied in the
multivariate setting. In addition, there are only a few Bayesian-based methods,
which are naturally attractive in the modelling of extremes due to data
scarcity. The use of Bayesian measures of surprise to determine suitable
thresholds for extreme value models is proposed. Such measures quantify the
level of support for the proposed extremal model and threshold, without the
need to specify any model alternatives. This approach is easily implemented for
both univariate and multivariate extremes.Comment: To appear in Computational Statistics and Data Analysi
Vibroacoustic study of the NASA Goddard Space Flight Center OSS-1 payload
A comparative evaluation of shuttle liftoff and ground test random response data obtained from the Office of Space Science-1 (OSS-1) pallet payload flown in the cargo bay of STS-3 is presented. The study was initiated to evaluate the possibility that the payload flight vibration response can exceed that occurred during ground test when the ground test acoustic excitation is normalized to the flight acoustic environment. In addition, the analytically derived response from the Vibroacoustic Payload Environment Prediction System (VAPEPS) is compared with OSS-1 ground test results
Design of photonic crystal optical waveguides with single-mode propagation in the photonic bandgap
The authors present a systematic method for designing dielectric-core photonic crystal optical waveguides that support only one mode in the photonic bandgap (PBG). It is shown that by changing the sizes of thc air columns (without perturbing the positions of the centres of the air column) in the two rows that are adjacent to the middle slab, the higher order mode(s) can be pushed out of the photonic bandgap, resulting in single-mode wave propagation in the bandgap
A MEMS electrostatic particle transportation system
We demonstrate here an electrostatic MEMS system
capable of transporting particles 5-10μm in diameter in
air. This system consists of 3-phase electrode arrays
covered by insulators (Figs. 1, 2). Extensive testing of
this system has been done using a variety of insulation
materials (silicon nitride, photoresist, and Teflon),
thickness (0- 12μm), particle sizes (1-10μm), particle
materials (metal, glass, polystyrene, spores, etc),
waveforms, frequencies, and voltages. Although
previous literature [1-2] claimed it impractical to
electrostatically transport particles with sizes 5-10μm
due to complex surface forces, this effort actually
shows it feasible (as high as 90% efficiency) with the
optimal combination of insulation thickness, electrode
geometry, and insulation material. Moreover, we suggest a qualitative theory for our particle transportation system which is consistent with our data and finite-element electrostatic simulations
An application of cluster detection to scene analysis
Certain arrangements of local features in a scene tend to group together and to be seen as units. It is suggested that in some instances, this phenomenon might be interpretable as a process of cluster detection in a graph-structured space derived from the scene. This idea is illustrated using a class of scenes that contain only horizontal and vertical line segments
- …