229 research outputs found

    MICROENCAPSULATION OF MERCAPTAN USING POLYCAPROLACTONE AS SHELL MATERIAL TOWARD SELF-HEALING COATING APPLICATIONS

    Get PDF
    Polymer materials incorporating microencapsulated self-healing agents have a wide range of application from paint coating, anti-corrosion coatings to automotive and construction materials. In this research, microcapsules containing reactive mercaptan compound for use in self healing polymers were successfully fabricated via the oil-in-water emulsion method. We employed for the first time the UV-initiated thiol-ene reaction between an alkene-functionalized polycaprolactone and a tetrathiol compound to form the microcapsule shell. To synthesize microcapsules, the tetrathiol was used in large excess, thus maintaining inside the microcapsules as the core material. The obtained microcapsules were analyzed by Fourier Transform infrared microscopy, optical microscopy, scanning electron microscopy (SEM) and laser diffraction particle size analysis. The core was extracted by Soxhlet extraction and analyzed by 1H NMR and FTIR spectroscopy

    Indoor PM₀.₁ and PM₂.₅ in Hanoi: Chemical characterization, source identification, and health risk assessment

    Get PDF
    This study attempted to provide comprehensive insights into the chemical composition, source identification, and health risk assessment of indoor particulate matter (PM) in urban areas of Vietnam. Three hundred and twenty daily samples of PM₀.₁ and PM₂.₅ were collected at three different types of dwellings in Hanoi in two seasons, namely summer and winter. The samples were analyzed for 10 trace elements (TEs), namely Cr, Mn, Co, Cu, Ni, Zn, As, Cd, Sn, and Pb. The daily average concentrations of indoor PM₀.₁ and PM₂.₅ in the city were in the ranges of 7.0–8.9 μg/m³ and 43.3–106 μg/m³, respectively. The average concentrations of TEs bound to indoor PM ranged from 66.2 ng/m³ to 216 ng/m³ for PM₀.₁ and 391 ng/m³ to 2360 ng/m³ for PM₂.₅. Principle component analysis and enrichment factor were applied to identify the possible sources of indoor PM. Results showed that indoor PM₂.₅ was mainly derived from outdoor sources, whereas indoor PM₀.₁ was derived from indoor and outdoor sources. Domestic coal burning, industrial and traffic emissions were observed as outdoor sources, whereas household dust and indoor combustion were found as indoor sources. 80% of PM₂.₅ was deposited in the head airways, whereas 75% of PM₀.₁ was deposited in alveolar region. Monte Carlo simulation indicated that the intake of TEs in PM₂.₅ can lead to high carcinogenic risk for people over 60 years old and unacceptable non-carcinogenic risks for all ages at the roadside house in winter

    Annealing-Induced Changes in Double-Brush Langmuir-Blodgett Films of α-Helical Diblock Copolypeptides

    Get PDF
    The effect of annealing on the structure and the helix orientation in Langmuir-Blodgett (LB) monolayers of diblock copolymers (PLGA-b-PMLGSLGs) of poly(α-L-glutamic acid) (PLGA) and poly(γ-methyl-L-glutamate-ran-γ-stearyl-L-glutamate) with 30 mol % of stearyl substituents (PMLGSLG) with unidirectional helix orientation deposited on hydrophilic silicon substrates was characterized by means of small-angle X-ray reflectivity, transmission Fourier transform infrared spectroscopy, and atomic force microscopy. Upon annealing at 100 °C for 24 h, the α-helices became less tilted toward the substrate surface normal. Surface area shrinkage accompanied the change in tilt, indicated by an increase in both film thickness and electron density, resulting in more compact and uniform films. The enhancement of the helix orientation by thermal annealing was greater for the PMLGSLG block and for the diblock copolymers with the shorter block lengths. For these diblock copolymers, annealing resulted in postorientation of the PMLGSLG block helices almost perpendicular to the substrate surface. This effect originates from a considerable increase in intermolecular packing of the PLGA block caused by hydrogen bonds between the carboxylic groups upon annealing, as well as the high mobility of the PMLGSLG block helices for rearrangement favored by the melted side chain mantle at elevated temperatures.

    Multi-block polyurethanes via RAFT end-group switching and their characterization by advanced hyphenated techniques

    Get PDF
    The detailed characterization of poly(styrene)-b-poly(tetrahydrofuran) (pS-b-pTHF) multiblock copolymers (17800 g mol(-1) <= M-n <= 46800 g mol(-1)) generated via urethane linkages is presented. The synthesis of the block copolymers is enabled via a mechanistic switch of the thiocarbonyl thio end group of a poly(styrene) to dihydroxyl terminated polymers that subsequently react with a diisocyanate terminated polytetrahydrofuran based prepolymer to form multiblock copolymer structures. The characterization of the multiblock copolymers and their substructures includes size exclusion chromatography (SEC), liquid chromatography at critical conditions (LCCC), nuclear magnetic resonance (NMR), and infrared (IR) spectroscopy as well as matrix-assisted laser desorption/ionization (MALDI) mass spectrometry. To obtain even further details of the polymer size and its composition, SEC with triple detection as well as newly developed SEC coupled online to IR spectroscopy was carried out. The quantification of the average block fractions via online SEC-IR (41-61 mol % pTHF) is in very good agreement with the results obtained via NMR spectroscopy (39-66 mol % pTHF)

    Formulation and solution technique for agricultural waste collection and transport network design

    Get PDF
    Agricultural waste management in developing countries has become a challenging issue for rural planners due to the lack of an efficient planning tool. In the countries, farmers burnt agricultural waste at fields after each harvesting season to solve the issue. As a result, it has caused air and water pollution in the rural areas of the countries. In this paper, we present a mixed-integer nonlinear programming model for agricultural waste collection and transport network design that aims to stop burning waste and use the waste to produce bio-organic fertilizer. The model supports rural planners to optimally locate waste storages, and to determine the optimal set of routes for a fleet of vehicles to collect and transport the waste from the storages to the bio-organic fertilizer production facility. In the novel location-assignment-routing problem, the overall objective is to minimize total cost of locating storages, collecting waste from fields and planning vehicle routes. A solution technique is developed to linearise the mixed-integer nonlinear programming model into a model in linear form. In addition, a parallel water flow algorithm is developed to solve efficiently the large-sized instances. The efficiency of the proposed model and algorithm is validated and evaluated on the real case study in Trieu Phong district, Quang Tri province, Vietnam, as well as a set of randomly generated large-sized instances. The results show that our solution approach outperforms the general optimisation solver and tabu search algorithm. Our algorithm can find the optimal or near-optimal solutions for the large-sized instances within a reasonable time

    Depression, anxiety and stress among healthcare workers in the context of the COVID-19 pandemic: a cross-sectional study in a tertiary hospital in Northern Vietnam

    Get PDF
    IntroductionThe outbreak of coronavirus severe acute respiratory syndrome coronavirus 2 (SARS-CoV2) had significant effects on the mental well-being in general, particularly for healthcare professionals. This study examined the prevalence of depression, anxiety, and stress, and identified the associated risk factors amongst healthcare workers during the COVID-19 outbreak in a tertiary hospital located in Vietnam.MethodsWe conducted a cross-sectional study at a tertiary-level hospital, where the Depression Anxiety and Stress Scale 21 (DASS-21) web-based questionnaire was employed. We analyzed the determinant factors by employing multivariate logistic models.ResultsThe prevalence of depression, anxiety, and stress symptoms were 19.2%, 24.7%, and 13.9%, respectively. Factors such as engaging in shift work during the pandemic, taking care of patients with COVID-19, and staff’s health status were associated with mental health issues among health professionals. In addition, having alternate rest periods was likely to reduce the risk of stress.ConclusionThe prevalence of mental health problems in healthcare workers during the COVID-19 pandemic was relatively high. Having resting periods could potentially mitigate the development of stress among health professionals. Our findings could be taken into account for improving mental health of the health professional population

    Analytical study of the sth-order perturbative corrections to the solution to a one-dimensional harmonic oscillator perturbed by a spatially power-law potential Vper(x) = λxα

    Get PDF
    In this work, we present a rigorous mathematical scheme for the derivation of the sth-order perturbative corrections to the solution to a one-dimensional harmonic oscillator perturbed by the potential V-per(x) = lambda x(alpha), where alpha is a positive integer, using the non-degenerate time-independent perturbation theory. To do so, we derive a generalized formula for the integral I = integral(+infinity)(-infinity)x(alpha)exp(-x(2))H-n(x)H-m(x)d(x), where H-n(x) denotes the Hermite polynomial of degree n, using the generating function of orthogonal polynomials. Finally, the analytical results with alpha = 3 and alpha = 4 are discussed in detail and compared with the numerical calculations obtained by the Lagrange-mesh method

    Combination Antifungal Therapy for Cryptococcal Meningitis

    Get PDF
    Background Combination antifungal therapy (amphotericin B deoxycholate and flucytosine) is the recommended treatment for cryptococcal meningitis but has not been shown to reduce mortality, as compared with amphotericin B alone. We performed a randomized, controlled trial to determine whether combining flucytosine or high-dose fluconazole with high-dose amphotericin B improved survival at 14 and 70 days. Methods We conducted a randomized, three-group, open-label trial of induction therapy for cryptococcal meningitis in patients with human immunodeficiency virus infection. All patients received amphotericin B at a dose of 1 mg per kilogram of body weight per day; patients in group 1 were treated for 4 weeks, and those in groups 2 and 3 for 2 weeks. Patients in group 2 concurrently received flucytosine at a dose of 100 mg per kilogram per day for 2 weeks, and those in group 3 concurrently received fluconazole at a dose of 400 mg twice daily for 2 weeks. Results A total of 299 patients were enrolled. Fewer deaths occurred by days 14 and 70 among patients receiving amphotericin B and flucytosine than among those receiving amphotericin B alone (15 vs. 25 deaths by day 14; hazard ratio, 0.57; 95% confidence interval [CI], 0.30 to 1.08; unadjusted P=0.08; and 30 vs. 44 deaths by day 70; hazard ratio, 0.61; 95% CI, 0.39 to 0.97; unadjusted P=0.04). Combination therapy with fluconazole had no significant effect on survival, as compared with monotherapy (hazard ratio for death by 14 days, 0.78; 95% CI, 0.44 to 1.41; P=0.42; hazard ratio for death by 70 days, 0.71; 95% CI, 0.45 to 1.11; P=0.13). Amphotericin B plus flucytosine was associated with significantly increased rates of yeast clearance from cerebrospinal fluid (−0.42 log10 colony-forming units [CFU] per milliliter per day vs. −0.31 and −0.32 log10 CFU per milliliter per day in groups 1 and 3, respectively; P<0.001 for both comparisons). Rates of adverse events were similar in all groups, although neutropenia was more frequent in patients receiving a combination therapy. Conclusions Amphotericin B plus flucytosine, as compared with amphotericin B alone, is associated with improved survival among patients with cryptococcal meningitis. A survival benefit of amphotericin B plus fluconazole was not found
    corecore