653 research outputs found
Probing Residue-Specific Interactions in the Stabilization of Proteins Using High-Resolution NMR: A Study of Disulfide Bond Compensation
It is well established that the oxidation state of cysteine residues in proteins are critical to overall physical stability. The presence of disulfide bonds most often imparts thermodynamic stability, and as such, engineered disulfide bonds have become a means for improving the viability of protein therapeutics. In some cases, however, disulfide bonds can diminish stability. Because proteins are held together by numerous weak interactions, understanding the mechanisms by which stabilization is achieved is important to the design of new biotechnology products that better resist unfolding and aggregation. Mechanistic information describing how specific interactions influence stability is lacking, in part because the techniques typically used to study inherent stability do not provide sufficient detail. In the present study, a model protein system, phosphatase of regenerating liver (PRL-1), was used to investigate the role of cysteine residues on physical stability. A combination of chemical modulation and mutagenesis was employed to alter the redox state of the protein, and the effects were observed using a combination of low- and high-resolution methods. Specifically, solution NMR data revealed the stability of PRL-1 depends on cooperation between local interactions with the Cys side chains. This approach provides a means to better understand how protein stabilization is achieved
1H, 15N, 13C Resonance Assignments of the Reduced and Active Form of Human Protein Tyrosine Phosphatase, PRL-1
Phosphatase of regenerating liver-1 (PRL-1) is a novel target for potentially treating cancer metastases. Although its specific biochemical role in these processes has yet to be delineated, considerable evidence suggests the phosphatase activity of PRL-1 is required for promoting cancer and metastasis. PRL-1 belongs to the protein tyrosine phosphatase (PTPase) family and functions using the CX5R consensus active site motif. Like other PTPases, PRL-1 is inhibited by oxidation at its active site Cys, however, disulfide bond formation occurs unusually readily in wild-type PRL-1. Chemical shift assignments are available for oxidized wild type, but numerous, substantial changes are observed in the spectra upon reduction. Because the reduced form is active, we sought to identify a stable mutant that would resist oxidation and be useful for facilitating drug screening and development using NMR-based assays. We present here NMR assignments for a full-length, reduced and active form of PRL-1, PRL-1-C170S-C171S, that is well suited for this purpose
Stability Analysis of an Inline Peptide-based Conjugate for Metal Delivery: Nickel(II)-claMP Tag Epidermal Growth Factor as a Model System
Metals are a key component of many diagnostic imaging and biotechnology applications, and the majority of cancer patients receive a platinum-based drug as part of their treatment. Significant effort has been devoted to developing tight binding synthetic chelators to enable effective targeted delivery of metal-based conjugates, with most successes involving lanthanides rather than transition metals for diagnostic imaging. Chemical conjugation modifies the protein’s properties and generates a heterogeneous mixture of products. Chelator attachment is typically done by converting the amino group on lysines to an amide, which can impact the stability and solubility of the targeting protein and these properties vary among the set of individual conjugate species. Site-specific attachment is sought to reduce complexity and control stability. Here, the metal abstraction peptide (MAP) technology was applied to create the claMP Tag, an inline platform for generating site-specific conjugates involving transition metals. The claMP Tag was genetically encoded into epidermal growth factor (EGF) and loaded with nickel(II) as a model system to demonstrate that the tag within the homogeneous inline conjugate presents sufficient solution stability to enable biotechnology applications. The structure and disulfide network of the protein and chemical stability of the claMP Tag and EGF components were characterized
Effects of Dusulfide Bond Formation and Protein Helicity on the Aggregation of Activating Transcription Factor 5 (ATF5)
Amorphous aggregation is a major problem for protein biopharmaceuticals, and aggregate formation in a drug formulation can have serious health implications for the patient. In many cases, an immunogenic response is generated from the administration of a drug product containing aggregated protein. This becomes especially significant when the patient requires long-term or repeated administration of the drug, because the likelihood of a severe immune response increases. While the prevention of protein aggregation is critically important for the future of protein pharmaceuticals, the process is still poorly understood. The lack of understanding regarding non-fibrillar aggregation is largely due to the fact that assembly is difficult to study. In particular the role that various structural features (i.e. α-helix, β-structure, disulfide bonds) play in the aggregation process varies with the amino acid sequence and is dependent upon tertiary structure and solution conditions. Well-structured proteins do not readily aggregate in solution, whereas partially unfolded proteins tend to aggregate rapidly and often become insoluble. Here, we present a unique and simple system for studying amorphous protein aggregation. We have previously reported the isolation of the basic leucine zipper (bZIP) domain of activating transcription factor 5 (ATF5), a protein notable for its potential as a pharmaceutical target for treatment of glioblastoma multiforme. This domain consists of a single α-helix and possesses a single cysteine residue. It is only partially structured and displays marginal stability in solution under physiological conditions. We have modulated solution conditions that affect backbone solubility and the oxidation state of the thiol to successfully investigate the role that α-helical structure and disulfide bond formation play in protein stability. Our data indicate that covalent cross-linking helps to retain ATF5’s helicity, which inhibits the formation of large aggregates. These studies have led to the identification of stabilizing conditions for ATF5, which will enable further study of the protein as a pharmaceutical target. Moreover, this work has general implications for analyzing stability of helical proteins in vitro and the specific atomic-level interactions in ATF5 that contribute to instability and self-association
Determination of neutralization capacity and stability of a basic methacrylate monomer using NMR
This is an Accepted Manuscript of an article published by Taylor & Francis in International Journal of Polymeric Materials and Polymeric Biomaterials in 2012, available online: http://www.tandfonline.com/10.1080/00914037.2011.574660.The durability of dental resin depends on the stability of the polymer. The neutralizing capacity of a basic methacrylate monomer and its chemical stability were measured using nuclear magnetic resonance (NMR) spectroscopy. Lactic acid solution was titrated with 2-(dimethylamino)ethylmethacrylate (DMAEMA) or 2-hydroxyethylmethacrylate (HEMA) and its chemical shifts monitored. Addition of DMAEMA alters the chemical shift proportionally to pH neutralization, whereas HEMA has no impact. Chemical shifts were used to quantify both the change in pH and monomer stability. The results demonstrate that neutralization by basic monomer can be achieved and that this can be measured using an NMR assay
Thiol-Disulfide Interchange in the Tocinoic Acid/Glutathione System During Freezing and Drying
Thiol-disulfide interchange (“disulfide scrambling”) is a common mechanism of covalent aggregation for protein drugs. Using tocinoic acid (cyclo-S-Cys-Tyr-Ile-Gln-Asn-Cys-(S); TA(ox)) and glutathione (γGlu-Cys-Gly; GSH), our previous work demonstrated that thiol/disulfide interchange is affected by lyophilization in a manner consistent with irreversible and regioselective loss of TA(ox) (Zhang et al., 2009, J Pharm Sci 98/9: 3312–3318). Here, we explore the contributions of stages of the lyophilization cycle to perturbations in thiol/disulfide interchange in the TA/GSH system. TA(ox) and GSH were co-lyophilized from phosphate buffer in the presence or absence of various excipients, then analyzed for TA(ox) and mixed disulfide products by reverse phase high performance liquid chromatography (rp-HPLC). Perturbations were found to occur primarily during freezing, before significant amounts of ice were removed by sublimation. Addition of a lyoprotectant (sucrose), a cryoprotectant (Tween-20) and flash-freezing influenced the product distribution only while ice was still present. Decreasing the redox potential by the addition of oxidized glutathione (GSSG) affected the product distribution differently in lyophilized samples and solution controls, but in neither case led to increased conservation of TA(ox)
IMP Dehydrogenase Inhibitors as Immunomodulators
Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/74880/1/j.1749-6632.1993.tb35869.x.pd
Synthesis and evaluation of a novel co-initiator for dentin adhesives: polymerization kinetics and leachables study
The final publication is available at Springer via http://dx.doi.org/10.1007/s11837-015-1335-6.A new tertiary amine co-initiator (TUMA) containing three methacrylate-urethane groups was synthesized for application in dentin adhesives. The photopolymerization kinetics and leaching of unreacted components from methacrylate-based dental polymers formulated with this new co-initiator were determined. The newly synthesize co-initiator showed good chemical stability and decreased amine release from the initiator system. This study provides important information for the future development of biocompatible dentin adhesives/composites
Effect of crosslinking density of polymers and chemical structure of amine-containing monomers on the neutralization capacity of dentin adhesives
Objectives
Neutralization of the acidic micro-environment at the tooth/material interface is expected to provide enhanced durability for dental composite restorations. The objective of this study is to explore the effect of amine-containing monomer formulations and the crosslinking density of the resultant polymers on the neutralization capacity.
Materials and methods
The co-monomer system was varied systematically to obtain different proportions of Bisphenol A glycerolate dimethacrylate (BisGMA) and 2-hydroxyethyl methacrylate (HEMA), while maintaining a constant amount of amine-containing methacrylate monomer. A series of amine-containing monomers covering a range of pKa values were examined. Crosslinking density of formed copolymers was controlled by adjusting the weight content of the dimethacrylate monomer BisGMA. Lactic acid (LA) was used as a probe to analyze the effectiveness of the basic polymers to neutralize acid. The neutralization capacity of each amine-containing crosslinked copolymer was characterized by measuring pH as a function of time when the specimens were soaked in 1-mM LA solution, and the results were compared to the control formulations composed solely of BisGMA and HEMA. Polymer surfaces were examined using the methyl orange (MO) assay to quantify the amount of accessible amine groups.
Results
For each amine-containing crosslinked co-polymer, the neutralization capacity is enhanced by decreasing crosslinking density (e.g., by reducing BisGMA concentration in the formulation). In addition, more amine groups were accessible when crosslinking density was decreased. For different amine-containing polymers with the same BisGMA concentration, the neutralization capacity is higher when the amino monomers with higher pKa values were used in the formulations.
Significance
This is the first time that the neutralization capacity based on crosslinked dental polymers has been studied. The information is important for future development of durable dentin adhesives
- …