COIN: Opening the internet of things to people's mobile devices

People's interaction with IoT devices such as proximity beacons, body-worn sensors, and controllable light bulbs is often mediated through personal mobile devices. Current approaches usually make applications operate in separate silos, as the functionality of IoT devices is fixed by vendors and typically accessed only through low-level proprietary APIs. This limits the flexibility in designing applications and requires intense wireless interactions, which may impact energy consumption. COIN is a system architecture that breaks this separation by allowing developers to flexibly run a slice of a mobile app's logic onto IoT devices. Mobile apps can dynamically deploy arbitrary tasks implemented as loosely coupled components. The underlying runtime support takes care of the coordination across tasks and of their real-time scheduling. Our prototype indicates that COIN both enables increased flexibility and improves energy efficiency at the IoT device, compared to traditional architectures

An RFID-Based Tracing and Tracking System for the Fresh Vegetables Supply Chain

The paper presents an innovative gapless traceability system able to improve the main business processes of the fresh vegetables supply chain. The performed analysis highlighted some critical aspects in the management of the whole supply chain, from the land to the table of the end consumer, and allowed us to reengineer the most important processes. In particular, the first steps of the supply chain, which include cultivation in greenhouses and manufacturing of packaged vegetables, were analyzed. The re-engineered model was designed by exploiting the potentialities derived from the combined use of innovative Radio Frequency technologies, such as RFID and NFC, and important international standards, such as EPCglobal. The proposed tracing and tracking system allows the end consumer to know the complete history of the purchased product. Furthermore, in order to evaluate the potential benefits of the reengineered processes in a real supply chain, a pilot project was implemented in an Italian food company, which produces ready-to-eat vegetables, known asIV gammaproducts. Finally, some important metrics have been chosen to carry out the analysis of the potential benefits derived from the use of the re-engineered model

An IoT-aware Architecture to improve Safety in Sports Environments

The introduction of Internet of Things enabling technologies into the sport and recreational activities domain provide an interesting research challenge. Their adoption could significantly improve the sport experience and also the safety level of team sports. Despite this, only few attempts have been done to demonstrate the benefits provided by use of IoT technologies in sport environments. To fill this gap, this paper propose an IoT-aware Sport System based on the jointly use of different innovative technologies and standards. By exploiting the potentialities offered by an ultra-low-power Hybrid Sensing Network (HSN), composed of 6LoWPAN nodes integrating UHF RFID functionalities, the system is able to collect, in real time, both environmental parameters and players’ physiological data. Sensed data are then delivered to a Cloud platform where a monitoring application makes them easily accessible via REST Web Services. A simple proof of concept has demonstrated the appropriateness of the proposed solution

Performance Evaluation of end-to-end security protocols in an Internet of Things

Wireless Sensor Networks are destined to play a fundamental role in the next-generation Internet, which will be characterized by the Machine-to-Machine paradigm, according to which, embedded devices will actively exchange information, thus enabling the development of innovative applications. It will contribute to assert the concept of Internet of Things, where end-to-end security represents a key issue. In such context, it is very important to understand which protocols are able to provide the right level of security without burdening the limited resources of constrained networks. This paper presents a performance comparison between two of the most widely used security protocols: IPSec and DTLS. We provide the analysis of their impact on the resources of embedded devices. For this purpose, we have modified existing implementations of both protocols to make them properly run on our hardware platforms, and we have performed an extensive experimental evaluation study. The achieved results are not a consequence of a classical simulation campaign, but they have been obtained in a real scenario that uses software and hardware typical of the current technological developments. Therefore, they can help network designers to identify the most appropriate secure mechanism for end-to-end IP communications involving constrained devices

An IoT-Aware Architecture for Smart Healthcare Systems

none7Over the last few years, the convincing forward steps in the development of Internet-of-Things (IoT) enabling solutions are spurring the advent of novel and fascinating applications. Among others, mainly Radio Frequency Identification (RFID), Wireless Sensor Network (WSN), and smart mobile technologies are leading this evolutionary trend. In the wake of this tendency, this paper proposes a novel, IoTaware, smart architecture for automatic monitoring and tracking of patients, personnel, and biomedical devices within hospitals and nursing institutes. Staying true to the IoT vision, we propose a Smart Hospital System (SHS) which relies on different, yet complementary, technologies, specifically RFID, WSN, and smart mobile, interoperating with each other through a CoAP/6LoWPAN/REST network infrastructure. The SHS is able to collect, in real time, both environmental conditions and patients’ physiological parameters via an ultra-low-power Hybrid Sensing Network (HSN) composed of 6LoWPAN nodes integrating UHF RFID functionalities. Sensed data are delivered to a control center where an advanced monitoring application makes them easily accessible by both local and remote users via a REST web service. The simple proof of concept implemented to validate the proposed SHS has highlighted a number of key capabilities and aspects of novelty which represent a significant step forward compared to the actual state of art.restrictedCATARINUCCI L.; DE DONNO D.; MAINETTI L.; PALANO L.; PATRONO L.; STEFANIZZI M.; TARRICONE L.Catarinucci, Luca; DE DONNO, Danilo; Mainetti, Luca; Palano, L.; Patrono, Luigi; Stefanizzi, MARIA LAURA; Tarricone, Lucian

A Cross-Layer Approach to Minimize the Energy Consumption in Wireless Sensor Networks

Energy efficiency represents one of the primary challenges in the development of wireless sensor networks (WSNs). Since communication is the most power consuming operation for a node, many current energy-efficient protocols are based on duty cycling mechanisms. However, most of these solutions are expensive from both the computational and the memory resources point of view and; therefore, they result in being hardly implementable on resources constrained devices, such as sensor nodes. This suggests to combine new communication protocols with hardware solutions able to further reduce the nodes' power consumption. In this work, a cross-layer solution, based on the combined use of a duty-cycling protocol and a new kind of active wake-up circuit, is presented and validated by using a test bed approach. The resulting solution significantly reduces idle listening periods by awakening the node only when a communication is detected. Specifically, an MAC scheduler manages the awakenings of a commercial power detector connected to the sensor node, and, if an actual communication is detected, it enables the radio transceiver. The effectiveness of the proposed cross-layer protocol has been thoroughly evaluated by means of tests carried out in an outdoor environment

A snapshot of Physical Education in Italian primary schools: assessing the resources available for an instrument of health promotion

Background: Regular physical activity is crucial in preventing chronic diseases. International health authorities recommend that children and adolescents engage in at least 60 minutes of moderate to vigorous physical activity per day to achieve health benefits. Offering regular exercise opportunities to young people can promote the development of healthy lifestyles. In 2021, a new regulation introduced up to two compulsory hours of Physical Education per week in Italy and established that Physical Education should be entrusted to adequately trained teachers. The present study aimed to assess, from the perspective of the new teachers, the resources available for Physical Education in Italian primary schools. Methods: A questionnaire-based cross-sectional study was conducted among primary school Physical Education teachers during the year 2022-2023. Their opinion about the school resources were analyzed in light of their demographic characteristics and work experience. Results: Out of the 118 participating teachers, 96 (81.3%) reported the presence of a gym in their school. Participants expressed satisfaction with the size and windows of the gym, particularly for the schools of the North, as well as the adequacy of outdoor spaces. However, lower levels of satisfaction for locker rooms and gym small equipment emerged, especially among those teachers with less work experience. Conclusions: The introduction of the Physical Education teacher figure in Italian primary schools was an important step for health promotion in our country. However, some aspects related to the structural resources should be considered in future policies

Performance Evaluation of an Energy-Efficient MAC Scheduler by using a Test Bed Approach

A Wireless Sensor Network consists of a large number of sensor nodes that are usually battery powered and deployed in large areas in which changing or recharging batteries may be impractical or completely unfeasible. Therefore, energy efficiency represents one of the main design objectives for these networks. Since most of the energy is consumed by the radio communication, the development of Medium Access Control protocols able to minimize the radio energy consumption is a very attractive research area. This paper presents an energy efficient communication protocol and its implementation in the Contiki Operating System. The performances and the portability of the proposed solution are thoroughly evaluated by means of both simulations, carried out using the Contiki simulation tools (i.e., Cooja and MPSim), and test beds based on two different platforms. Obtained results show that the proposed scheme significantly reduces the sensor nodes power consumption compared to the IEEE 802.15.4 standard solution already implemented in Contiki

Integrating Passive UHF RFID Tags with WSN Nodes: Challenges and Opportunities

Radio Frequency Identification (RFID) and Wireless Sensor Networks (WSNs) have received an ever-increasing attention in recent years, mainly because they represent two of the most important technologies enabling the Internet of Things vision. Although designed originally with different objectives, WSN and RFID represent two complementary technologies whose integration might increase their functionalities and extend their range of applications. However, important technological issues must still be solved in order to fully exploit the potentialities offered by such integration. In this work, an innovative RFID-WSN integration approach is presented and validated. It relies on the interconnection of a new-generation, long-range, EPCglobal Class-1 Generation-2 Ultra-High-Frequency (UHF) RFID tag with a commercial WSN node via the I2C interface. Experimental results have demonstrated the effectiveness of the proposed approach compared to existing solution in the literature. Interesting application scenarios enabled by the proposed RFID-WSN integration approach are briefly summarized at the end of the paper

Perceived and measured hues under different sources

The diffusion of LED lamps for interior lighting, which possess spectral power distributions (SPDs) that considerably differ from the traditional light sources' ones, arose some questions on colour perception, and particularly on colour appearance. These questions led to a debate about the efficacy of CRI and the need of other indexes to evaluate colour quality of lighting sources. An experiment of colour evaluation has been carried out in a test room lit by LED lamps with very high CRI and three different CCTs. Some results were compared to colour attributes derived by applying the CIECAM02 model to measured data