Field electron emission of double walled carbon nanotube film prepared by drop casting method

Thick films of double walled carbon nanotubes (DWCN) were deposited on indium-tin-oxide (ITO) coated glass substrates by drop casting method and were studied for their field electron emission property in a parallel plate configuration using bare ITO coated glass as counter electrode. They show excellent field electron emission property with low turn-on-field of about 0.8 V/lm and threshold field of about 1.8 V/lm. Field enhancement factor calculated from the non-saturated region of the FN plot is about 1715. Field electron emission current was observed to be stable up to 3000 min, indicating thereby that DWCNs are excellent electron emitters with appreciable stable performance

SnS2 quantum dots: facile synthesis, properties and applications in ultraviolet photodetector

Tin sulfide quantum dots (SnS2 QDs) are n-type wide band gap semiconductor. They exhibit a high optical absorption coefficient and strong photoconductive property in the ultraviolet and visible regions. Therefore, they have been found to have many potential applications, such as gas sensors, resistors, photodetectors, photocatalysts, and solar cells. However, the existing preparation methods for SnS2 QDs are complicated and require a high temperature and high pressure environment; hence they are unsuitable for large-scale industrial production. An effective method for the preparation of monodispersed SnS2 QDs at normal temperature and pressure will be discussed in this paper. The method is facile, green, and low-cost. In this work, the structure, morphology, optical, electrical, and photoelectric properties of SnS2 QDs are studied. The synthesized SnS2 QDs are homogeneous in size and exhibit good photoelectric performance. A photoelectric detector based on the SnS2 QDs is fabricated and its J-V and C-V characteristics are also studied. The detector responds under λ=365 nm light irradiation and reverse bias voltage. Its detectivity approximately stabilizes at 1011 Jones at room temperature. These results show the possible use of SnS2 QDs in photodetectors

In2S3 Quantum Dots: Preparation, Properties and Optoelectronic Application

Low-dimensional semiconductors exhibit remarkable performances in many device applications because of their unique physical, electrical, and optical properties. In this paper, we report a novel and facile method to synthesize In2S3 quantum dots (QDs) at atmospheric pressure and room temperature conditions. This involves the reaction of sodium sulfide with indium chloride and using sodium dodecyl sulfate (SDS) as a surfactant to produce In2S3 QDs with excellent crystal quality. The properties of the as-prepared In2S3 QDs were investigated and photodetectors based on the QDs were also fabricated to study the use of the material in optoelectronic applications. The results show that the detectivity of the device stabilizes at ~ 1013 Jones at room temperature under 365 nm ultraviolet light irradiation at reverse bias voltage

Intragrain impurity annihilation for highly efficient and stable perovskite solar cells

Intragrain impurities can impart detrimental effects on the efficiency and stability of perovskite solar cells, but they are indiscernible to conventional characterizations and thus remain unexplored. Using in situ scanning transmission electron microscopy, we reveal that intragrain impurity nano-clusters inherited from either the solution synthesis or post-synthesis storage can revert to perovskites upon irradiation stimuli, leading to the counterintuitive amendment of crystalline grains. In conjunction with computational modelling, we atomically resolve crystallographic transformation modes for the annihilation of intragrain impurity nano-clusters and probe their impacts on optoelectronic properties. Such critical fundamental findings are translated for the device advancement. Adopting a scanning laser stimulus proven to heal intragrain impurity nano-clusters, we simultaneously boost the efficiency and stability of formamidinium-cesium perovskite solar cells, by virtual of improved optoelectronic properties and relaxed intra-crystal strain, respectively. This device engineering, inspired and guided by atomic-scale in situ microscopic imaging, presents a new prototype for solar cell advancement

Photoresponse of polyaniline-functionalized graphene quantum dots

Polyaniline-functionalized graphene quantum dots (PANI-GQD) and pristine graphene quantum dots (GQDs) were utilized for optoelectronic devices. The PANI-GQD based photodetector exhibited higher responsivity which is about an order of magnitude at 405 nm and 7 folds at 532 nm as compared to GQD-based photodetectors. The improved photoresponse is attributed to the enhanced interconnection of GQD by island-like polymer matrices, which facilitate carrier transport within the polymer matrices. The optically tunable current–voltage (I–V) hysteresis of PANI-GQD was also demonstrated. The hysteresis magnifies progressively with light intensity at a scan range of ±1 V. Both GQD and PANI-GQD devices change from positive to negative photocurrent when the bias reaches 4 V. Photogenerated carriers are excited to the trapping states in GQDs with increased bias. The trapped charges interact with charges injected from the electrodes which results in a net decrease of free charge carriers and a negative photocurrent. The photocurrent switching phenomenon in GQD and PANI-GQD devices may open up novel applications in optoelectronics

Atomically resolved electrically active intragrain interfaces in perovskite semiconductors

Deciphering the atomic and electronic structures of interfaces is key to developing state-of-the-art perovskite semiconductors. However, conventional characterization techniques have limited previous studies mainly to grain-boundary interfaces, whereas the intragrain-interface microstructures and their electronic properties have been much less revealed. Herein using scanning transmission electron microscopy, we resolved the atomic-scale structural information on three prototypical intragrain interfaces, unraveling intriguing features clearly different from those from previous observations based on standalone films or nanomaterial samples. These intragrain interfaces include composition boundaries formed by heterogeneous ion distribution, stacking faults resulted from wrongly stacked crystal planes, and symmetrical twinning boundaries. The atomic-scale imaging of these intragrain interfaces enables us to build unequivocal models for the ab initio calculation of electronic properties. Our results suggest that these structure interfaces are generally electronically benign, whereas their dynamic interaction with point defects can still evoke detrimental effects. This work paves the way toward a more complete fundamental understanding of the microscopic structure–property–performance relationship in metal halide perovskites