25 research outputs found
Comparison of Various Types of k-ε Models for Pollutant Emissions around a Two-Building Configuration
Simulation of Near-field Dispersion of Pollutants Using Detached-Eddy Simulation
A numerical simulation is developed using the unsteady-state turbulence model on a structured highly refined grid to predict the wind-flow field and dispersion field of a pollutant emitted from a rooftop stack around a two-building configuration. The results obtained are compared with those of a steady-state model previously reported by the authors. The pollutant concentrations are examined on the roof where the stack is located as well as on the leeward wall of an upstream tower to the emitting building in order to evaluate how the pollutant is dispersed by the DES model compared to RNG model. DES results are discussed against those from RNG k–ε approach and wind tunnel. The study emphasises limits in reproducing correctly the wind flow and dispersion fields due to underestimation and/or overestimation of the Reynolds stress components and the steady-state methodology when using the RNG k–ε model. Despite such limits, the RNG model produces a similar average error, in terms of concentrations, to that obtained with the DES model
Effect of Stack Height and Exhaust Velocity on Pollutant Dispersion in the Wake of a Building
The dispersion of pollutants exhausted from a building roof stack located in the wake of a tower is investigated by means of the realizable k–ɛ turbulence model. Variations in stack height and pollutant exhaust velocity are considered to assess their influence on the distribution of pollutant concentrations in the neighbourhood of the emitting building. In order to determine optimum locations for fresh-air intakes, the worst case is considered, namely when the wind originates directly upstream of the tower and places the emitting building in its wake. Special attention is given to the evolution of the plume and distribution of pollutant concentrations on the roof and windward wall of the emitting building, as well as on the leeward wall of the upwind tower. Simulation results are compared to wind tunnel experiments conducted in a boundary layer wind tunnel. For this particular configuration, the paper shows that increasing the stack height has an effect similar to that obtained by increasing the momentum ratio, but with some differences, depending upon which wall of the two buildings is considered. On the emitting building, the leeward wall has the lowest concentration values for all stack heights and momentum ratios considered; thus this is the best location for fresh-air intakes. However, for the tower, fresh-air intakes should not be located on the leeward wall due to high pollutant concentrations. The results show completely different pollutant dispersion patterns from those for an isolated building. This highlights the importance of accounting for structures that lie in close proximity to the emitting building
Numerical Simulation of Pollutant Dispersion around Building Complex. Building and Environment
The dispersion of exhausted pollutants from a building roof stack situated in the wake of a neighbouring tower has been studied using computational fluid dynamics (CFD) with the realizable k–ɛ turbulence model for closure. Two scales are considered in this work, full-scale (1:1) and wind tunnel scale (1:200).
Of primary interest are the distributions of the plume and of the pollutant concentrations on the building roof as well as on the leeward wall of the tower. Two stack heights and pollutant exhaust velocities have been considered for the distribution of pollutant concentrations in the neighbourhood of the building from which the pollutant is emitted. Results are compared with measurements from field and wind tunnel experiments to estimate the accuracy of simulations
NUMERICAL SIMULATION OF THE INCOMPRESSIBLE TURBULENT FLOW OF A BINARY MIXTURE OF AIR-WATER VAPOR: APPLICATIONS IN DRYING PROCESS
Évolution de la fonction rénale chez les donneurs vivants obèses en transplantation rénale
Pathogénicité des anticorps anti-PLA2R1 médiée par l’activation du complément dans la glomérulonéphrite extra-membraneuse in vitro
Rotor Pole Shape Optimization of Permanent Magnet Brushless DC Motors Using the Reduced Basis Technique
In this paper, a magnet shape optimization method for reduction of cogging torque and torque ripple in Permanent Magnet (PM) brushless DC motors is presented by using the reduced basis technique coupled by finite element and design of experiments methods. The primary objective of the method is to reduce the enormous number of design variables required to define the magnet shape. The reduced basis technique is a weighted combination of several basis shapes. The aim of the method is to find the best combination using the weights for each shape as the design variables. A multi-level design process is developed to find suitable basis shapes or trial shapes at each level that can be used in the reduced basis technique. Each level is treated as a separated optimization problem until the required objective is achieved. The experimental design of Taguchi method is used to build the approximation model and to perform optimization. This method is demonstrated on the magnet shape optimization of a 6-poles/18-slots PM BLDC motor