Device for measuring the temperature of liquid and gaseous hydrogen Final report

Fabrication and test data cryogenic temperature transducer extremely fast in response to temperature changes - device for measuring temperature of liquid and gaseous hydroge

Mean velocity, turbulence intensity and turbulence convection velocity measurements for a convergent nozzle in a free jet wind tunnel

The effect of light on the mean flow and turbulence properties of a 0.056 m circular jet were determined in a free jet wind tunnel. The nozzle exit velocity was 122 m/sec, and the wind tunnel velocity was set at 0, 12, 37, and 61 m/sec. Measurements of flow properties including mean velocity, turbulence intensity and spectra, and eddy convection velocity were carried out using two linearized hot wire anemometers. Normalization factors were determined for the mean velocity and turbulence convection velocity

Radar data processing and analysis

Digitized four-channel radar images corresponding to particular areas from the Phoenix and Huntington test sites were generated in conjunction with prior experiments performed to collect X- and L-band synthetic aperture radar imagery of these two areas. The methods for generating this imagery are documented. A secondary objective was the investigation of digital processing techniques for extraction of information from the multiband radar image data. Following the digitization, the remaining resources permitted a preliminary machine analysis to be performed on portions of the radar image data. The results, although necessarily limited, are reported

Non-axisymmetric instability of shear-banded Taylor-Couette flow

Recent experiments show that shear-banded flows of semi-dilute worm-like micelles in Taylor-Couette geometry exhibit a flow instability in the form of Taylor-like vortices. Here we perform the non-axisymmetric linear stability analysis of the diffusive Johnson-Segalman model of shear banding and show that the nature of this instability depends on the applied shear rate. For the experimentally relevant parameters, we find that at the beginning of the stress plateau the instability is driven by the interface between the bands, while most of the stress plateau is occupied by the bulk instability of the high-shear-rate band. Our work significantly alters the recently proposed stability diagram of shear-banded flows based on axisymmetric analysis.Comment: 6 pages, 5 figures, main text and supplementary material; accepted to Phys. Rev. Let

Flows, Fragmentation, and Star Formation. I. Low-mass Stars in Taurus

The remarkably filamentary spatial distribution of young stars in the Taurus molecular cloud has significant implications for understanding low-mass star formation in relatively quiescent conditions. The large scale and regular spacing of the filaments suggests that small-scale turbulence is of limited importance, which could be consistent with driving on large scales by flows which produced the cloud. The small spatial dispersion of stars from gaseous filaments indicates that the low-mass stars are generally born with small velocity dispersions relative to their natal gas, of order the sound speed or less. The spatial distribution of the stars exhibits a mean separation of about 0.25 pc, comparable to the estimated Jeans length in the densest gaseous filaments, and is consistent with roughly uniform density along the filaments. The efficiency of star formation in filaments is much higher than elsewhere, with an associated higher frequency of protostars and accreting T Tauri stars. The protostellar cores generally are aligned with the filaments, suggesting that they are produced by gravitational fragmentation, resulting in initially quasi-prolate cores. Given the absence of massive stars which could strongly dominate cloud dynamics, Taurus provides important tests of theories of dispersed low-mass star formation and numerical simulations of molecular cloud structure and evolution.Comment: 32 pages, 9 figures: to appear in Ap

Thermal and hydrodynamic effects in the ordering of lamellar fluids

Phase separation in a complex fluid with lamellar order has been studied in the case of cold thermal fronts propagating diffusively from external walls. The velocity hydrodynamic modes are taken into account by coupling the convection-diffusion equation for the order parameter to a generalised Navier-Stokes equation. The dynamical equations are simulated by implementing a hybrid method based on a lattice Boltzmann algorithm coupled to finite difference schemes. Simulations show that the ordering process occurs with morphologies depending on the speed of the thermal fronts or, equivalently, on the value of the thermal conductivity {\xi}. At large value of {\xi}, as in instantaneous quenching, the system is frozen in entangled configurations at high viscosity while consists of grains with well ordered lamellae at low viscosity. By decreasing the value of {\xi}, a regime with very ordered lamellae parallel to the thermal fronts is found. At very low values of {\xi} the preferred orientation is perpendicular to the walls in d = 2, while perpendicular order is lost moving far from the walls in d = 3.Comment: 8 pages, 3 figures. Accepted for publication in Phil. Trans. of Royal Soc, Ser

Population polygons of tektite specific gravity for various localities in australasia

Comparison of specific gravity of tektites from australia, asia, texas, and czechoslovaki

Shear Thickening and Scaling of the Elastic Modulus in a Fractal Colloidal System with Attractive Interactions

Dilute oil dispersions of fractal carbon black particles with attractive Van der Waals interactions display continuous shear thickening followed by shear thinning at high shear rates. The shear thickening transition occurs at $\dot\gamma_{c}\approx 10^{2}-10^{3}s^{-1}$ and is driven by hydrodynamic breakup of clusters. Pre-shearing dispersions at shear rates $\dot\gamma>\dot\gamma_{c}$ produces enhanced-modulus gels where $G' \sim \sigma_{pre-shear}^{1.5-2}$ and is directly proportional to the residual stress in the gel measured at a fixed sample age. The observed data can be accounted for using a simple scaling model for the breakup of fractal clusters under shear stress.Comment: 5 pages, 5 figures; v2: treating low shear rate date separately; edited title; reworked figure

Structural/control interaction (payload pointing and micro-g)

A 203rd order simulation model was developed to evaluate the space station customer accommodation payload pointing and micro-g requirements. The simulation shows the pointing errors on the telescope are significantly smaller than at the base of the telescope. The pointing results could change when the parametric studies are performed. The results show the micro-g requirement is met with an active isolation system

A Prediction of Brown Dwarfs in Ultracold Molecular Gas

A recent model for the stellar initial mass function (IMF), in which the stellar masses are randomly sampled down to the thermal Jeans mass from hierarchically structured pre-stellar clouds, predicts that regions of ultra-cold CO gas, such as those recently found in nearby galaxies by Allen and collaborators, should make an abundance of Brown Dwarfs with relatively few normal stars. This result comes from the low value of the thermal Jeans mass, considering that the hierarchical cloud model always gives the Salpeter IMF slope above this lower mass limit. The ultracold CO clouds in the inner disk of M31 have T~3K and pressures that are probably 10 times higher than in the solar neighborhood. This gives a mass at the peak of the IMF equal to 0.01 Msun, well below the Brown Dwarf limit of 0.08 Msun. Using a functional approximation to the IMF, the ultracold clouds would have 50% of the star-like mass and 90% of the objects below the Brown Dwarf limit. The brightest of the Brown Dwarfs in M31 should have an apparent, extinction-corrected K-band magnitude of ~21 mag in their pre-main sequence phase.Comment: 13 pages, 2 figures, to be published in Astrophysical Journal, Vol 522, September 10, 199