1,753 research outputs found
Turbine endwall single cylinder program
Measurements of the flow field in front of a large-scale single cylinder, mounted in a wind tunnel are discussed. Static pressures on the endwall and cylinder surfaces, extensive five-hole probe pressures in front of and around the cylinder, and velocity fluctuations using a hot-wire probe where the flow is steady enough to yield meaningful results are included
Measurements of a turbulent horseshoe vortex formed around a cylinder
An experimental investigation was conducted to characterize a symmetrical horseshoe vortex system in front of and around a single large-diameter right cylinder centered between the sidewalls of a wind tunnel. Surface flow visualization and surface static pressure measurements as well as extensive mean velocity and pressure measurements in and around the vortex system were acquired. The results lend new insight into the formation and development of the vortex system. Contrary to what has been assumed previously, a strong vortex was not identified in the streamwise plane of symmetry, but started a significant angular distance away from it. Rather than the multiple vortex systems reported by others, only a single primary vortex and saddle point were found. The scale of the separation process at the saddle point was much smaller than the scale of the approaching boundary layer thickness. Results of the present study not only shed light on such phenomena as the nonsymmetrical endwall flow in axial turbomachinery but can also be used as a test case for three-dimensional computational fluid mechanics computer codes
A multimission three-axis stabilized spacecraft flight dynamics ground support system
The Multimission Three-Axis Stabilized Spacecraft (MTASS) Flight Dynamics Support System (FDSS) has been developed in an effort to minimize the costs of ground support systems. Unlike single-purpose ground support systems, which attempt to reduce costs by reusing software specifically developed for previous missions, the multimission support system is an intermediate step in the progression to a fully generalized mission support system in which numerous missions may be served by one general system. The benefits of multimission attitude ground support systems extend not only to the software design and coding process, but to the entire system environment, from specification through testing, simulation, operations, and maintenance. This paper reports the application of an MTASS FDSS to multiple scientific satellite missions. The satellites are the Upper Atmosphere Research Satellite (UARS), the Extreme Ultraviolet Explorer (EUVE), and the Solar Anomalous Magnetospheric Particle Explorer (SAMPEX). Both UARS and EUVE use the multimission modular spacecraft (MMS) concept. SAMPEX is part of the Small Explorer (SMEX) series and uses a much simpler set of attitude sensors. This paper centers on algorithm and design concepts for a multimission system and discusses flight experience from UARS
Embodied carbon and construction cost differences between Hong Kong and Melbourne buildings
Limiting the amount of embodied carbon in buildings can help minimize the damaging impacts of global warming through lower upstream emission of CO2. This study empirically investigates the embodied carbon footprint of new-build and refurbished buildings in both Hong Kong and Melbourne to determine the embodied carbon profile and its relationship to both embodied energy and construction cost. The Hong Kong findings suggest that mean embodied carbon for refurbished buildings is 33-39% lower than new-build projects, and the cost for refurbished buildings is 22-50% lower than new-build projects (per square metre of floor area). The Melbourne findings, however, suggest that mean embodied carbon for refurbished buildings is 4% lower than new-build projects, and the cost for refurbished buildings is 24% higher than new-build projects (per square metre of floor area). Embodied carbon ranges from 645-1,059 kgCO2e/m2 for new-build and 294-655 kgCO2e/m2 for refurbished projects in Hong Kong, and 1,138-1,705 kgCO2e/m2 for new-build and 900-1,681 kgCO2e/m2 for refurbished projects in Melbourne. The reasons behind these locational discrepancies are explored and critiqued. Overall, a very strong linear relationship between embodied energy and construction cost in both cities was found and can be used to predict the former, given the latter
A phenomenological analysis of the role and well-beingchallenges experienced by professional International SchoolCounsellors
Professional International School Counsellors (PISCs) experience a range of well-being challenges that are specific to the dynamics of their role. There is a scarcity of empirical research seeking to gain a better understanding of such challenges, along with coping strategies. Therefore, the primary objective of this study was to investigate how PISCs maintain their well-being. The research used Interpretive Phenomenological Analysis applied to semi-structured interviews. Eight PISCs were recruited. The analysis revealed three overarching themes: (i)workload and role definition challenges, (ii) available support, and (iii)maintaining a balanced lifestyle. Findings showed that the study participants often have ill-defined roles, leading to role confusion and work overload. A key implication is that systematic provision is recommended for supporting PISCs’ well-being
Aeroelastic model helicopter rotor testing in the Langley TDT
Wind-tunnel testing of a properly scaled aeroelastic model helicopter rotor is considered a necessary phase in the design development of new or existing rotor systems. For this reason, extensive testing of aeroelastically scaled model rotors is done in the Transonic Dynamics Tunnel (TDT) located at the NASA Langley Research Center. A unique capability of this facility, which enables proper dynamic scaling, is the use of Freon as a test medium. A description of the TDT and a discussion of the benefits of using Freon as a test medium are presented. A description of the model test bed used, the Aeroelastic Rotor Experimental System (ARES), is also provided and examples of recent rotor tests are cited to illustrate the advantages and capabilities of aeroelastic model rotor testing in the TDT. The importance of proper dynamic scaling in identifying and solving rotorcraft aeroelastic problems, and the importance of aeroelastic testing of model rotor systems in the design of advanced rotor systems are demonstrated
An experimental study of the sensitivity of helicopter rotor blade tracking to root pitch adjustment in hover
The sensitivity of blade tracking in hover to variations in root pitch was examined for two rotor configurations. Tests were conducted using a four bladed articulated rotor mounted on the NASA-Army aeroelastic rotor experimental system (ARES). Two rotor configurations were tested: one consisting of a blade set with flexible fiberglass spars and one with stiffer (by a factor of five in flapwise and torsional stiffnesses) aluminum spars. Both blade sets were identical in planform and airfoil distribution and were untwisted. The two configurations were ballasted to the same Lock number so that a direct comparison of the tracking sensitivity to a gross change in blade stiffness could be made. Experimental results show no large differences between the two sets of blades in the sensitivity of the blade tracking to root pitch adjustments. However, a measurable reduction in intrack coning of the fiberglass spar blades with respect to the aluminum blades is noted at higher rotor thrust conditions
Rotating Shake Test and Modal Analysis of a Model Helicopter Rotor Blade
Rotating blade frequencies for a model generic helicopter rotor blade mounted on an articulated hub were experimentally determined. Testing was conducted using the Aeroelastic Rotor Experimental System (ARES) testbed in the Helicopter Hover Facility (HBF) at Langley Research Center. The measured data were compared to pretest analytical predictions of the rotating blade frequencies made using the MSC/NASTRAN finite-element computer code. The MSC/NASTRAN solution sequences used to analyze the model were modified to account for differential stiffening effects caused by the centrifugal force acting on the blade and rotating system dynamic effects. The correlation of the MSC/NASTRAN-derived frequencies with the experimental data is, in general, very good although discrepancies in the blade torsional frequency trends and magnitudes were observed. The procedures necessary to perform a rotating system modal analysis of a helicopter rotor blade with MSC/NASTRAN are outlined, and complete sample data deck listings are provided
A 1.1 to 1.9 GHz SETI Survey of the Kepler Field: I. A Search for Narrow-band Emission from Select Targets
We present a targeted search for narrow-band (< 5 Hz) drifting sinusoidal
radio emission from 86 stars in the Kepler field hosting confirmed or candidate
exoplanets. Radio emission less than 5 Hz in spectral extent is currently known
to only arise from artificial sources. The stars searched were chosen based on
the properties of their putative exoplanets, including stars hosting candidates
with 380 K > T_eq > 230 K, stars with 5 or more detected candidates or stars
with a super-Earth (R_p 50 day orbit. Baseband voltage data
across the entire band between 1.1 and 1.9 GHz were recorded at the Robert C.
Byrd Green Bank Telescope between Feb--Apr 2011 and subsequently searched
offline. No signals of extraterrestrial origin were found. We estimate that
fewer than ~1% of transiting exoplanet systems host technological civilizations
that are radio loud in narrow-band emission between 1-2 GHz at an equivalent
isotropically radiated power (EIRP) of ~1.5 x 10^21 erg s^-1, approximately
eight times the peak EIRP of the Arecibo Planetary Radar, and we limit the the
number of 1-2 GHz narrow-band-radio-loud Kardashev type II civilizations in the
Milky Way to be < 10^-6 M_solar^-1. Here we describe our observations, data
reduction procedures and results.Comment: Accepted to the Astrophysical Journa
- …