171 research outputs found
Protocol for the diagnosis of keratoconus using convolutional neural networks
Keratoconus is the corneal disease with the highest reported incidence of 1:2000. The treatment’s level of success highly depends on how early it was started. Subsequently, a fast
and highly capable diagnostic tool is crucial. While there are many computer-based systems
that are capable of the analysis of medical image data, they only provide parameters. These
have advanced quite far, though full diagnosis does not exist. Machine learning has provided the capabilities for the parameters, and numerous similar scientific fields have developed full image diagnosis based on neural networks. The Homburg Keratoconus Center
has been gathering almost 2000 patient datasets, over 1000 of them over the course of their
disease. Backed by this databank, this work aims to develop a convolutional neural network
to tackle diagnosis of keratoconus as the major corneal disease
Evaluation of optimal Zernike radial degree for representing corneal surfaces
Tomography data of the cornea usually contain useful information for ophthalmologists. Zernike polynomials are often used to characterize and interpret these data. One of the major
challenges facing researchers is finding the appropriate number of Zernike polynomials to
model measured data from corneas. It is undeniable that a higher number of coefficients
reduces the fit error. However, utilizing too many coefficients consumes computational
power and time and bears the risk of overfitting as a result of including unnecessary components. The main objective of the current study is to analyse the accuracy of corneal surface
data modelled with Zernike polynomials of various degrees in order to estimate a reasonable
number of coefficients. The process of fitting the Zernike polynomials to height data for corneal anterior and posterior surfaces is presented and results are shown for normal and pathological corneas. These results indicate that polynomials of a higher degree are required for
fitting corneas of patients with corneal ectasia than for normal corneas
Intensity simulation of photic effects after cataract surgery for off-axis light sources
Photopsia is a photic phenomenon that can be associated with intraocular lenses after cataract surgery. To calculate the relative light intensity of photic effects observed after cataract
surgery at the foveal region as the most sensitive region of the retina, photopsia was simulated using the ZEMAX optical design software. The simulations are based on the LiouBrennan eye model with a pupil diameter of 4.5 mm and incorporating implanted IOLs. The
hydrophilic IOLs implanted in the eye model have a power of 21 diopter (D) with an optic
diameter of 6 mm and 7 mm. Four different intensity detectors are located in specific regions
of the eye in this simulation. The ray-tracing analysis was carried out for variations of incident ray angle of 0Ëš to 90Ëš (temporally) in steps of 1Ëš. Depending on the range of incident ray
angle, the light intensity was detected at detectors located on the fovea, nasal side of the retina, or the edge surface of the IOLs. Some portion of the input light was detected at specific
incident angles in the foveal region. By altering the IOLs edge design to a fully reflective or
anti-reflective surface, the range over which the light intensity is detected on the fovea can
be shifted. Additionally, with the absorbing edge design, no intensity was detected at the
foveal region for incident ray angles larger than 5Ëš. Therefore an absorbing edge design can
make photic effects less disturbing for patients
EDOF intraocular lens design: shift in image plane vs object vergence
Background To compare 2 diferent design scenarios of EDOF-IOLs inserted in the Liou-Brennan schematic model
eye using raytracing simulation as a function of pupil size.
Methods Two EDOF IOL designs were created and optimized for the Liou-Brennan schematic model eye using
Zemax ray tracing software. Each lens was optimized to achieve a maximum Strehl ratio for intermediate and far
vision. In the frst scenario, the object was located at infnity (O1), and the image plane was positioned at far focus
(I1) and intermediate focus (I2) to emulate far and intermediate distance vision, respectively. In the second scenario,
the image plane was fxed at I1 according to the frst scenario. The object plane was set to infnity (O1) for far-distance
vision and then shifted closer to the eye (O2) to reproduce the corresponding intermediate vision. The performance
of both IOLs was simulated for the following 3 test conditions as a function of pupil size: a) O1 to I1, b) O1 to I2, and c)
O2 to I1. To evaluate the imaging performance, we used the Strehl ratio, the root-mean-square (rms) of the spot
radius, and the spherical aberration of the wavefront for various pupil sizes.
Results Evaluating the imaging performance of the IOLs shows that the imaging performance of the IOLs is essentially identical for object/image at O1/I1. Designed IOLs perform dissimilarly to each other in near-vision scenarios,
and the simulations confrm that there is a slight diference in their optical performance.
Conclusion Our simulation study recommends considering the diference between object shift and image plane
shift in design and test conditions to achieve more accurate pseudoaccommodation after cataract surgery
Aberration Correction with Aspheric Intraocular Lenses
The shape of the normal human cornea induces positive spherical aberration (SA) which causes image blur. In the young phakic eye, the crystalline lens compensates for a certain amount of this corneal aberration. However, the compensation slowly decreases with the aging lens and is fully lost after cataract extraction and implantation of a standard intraocular lens (IOL). Conventional spherical IOLs add their intrinsic positive SA to the positive SA of the cornea increasing the image blur. As a useful side effect, this also increases the depth of focus—often referred to as pseudo-accommodation. Aspheric intraocular lenses have been introduced to be either neutral to SA or to compensate for a certain amount of corneal SA. A customized correction for the individual eye seems to be the most promising solution for tailored correction of SA. In this chapter we will provide detailed information on the various concepts of aspheric intraocular lenses to elucidate that the term “aspheric intraocular lens” is being used for a large amount of different lens designs
Eye-Tracker-Guided Non-Mechanical Excimer Laser Assisted Penetrating Keratoplasty
Purpose: The purpose of the study was to implement a new eye tracking mask which could be used to guide the laser beam in automated non-mechanical excimer laser assisted penetrating keratoplasty. Materials and methods: A new trephination mask design with an elevated surface geometry has been proposed with a step formation between conical and flat interfaces. Two recipient masks of 7.5/8.0 mm have been manufactured and tested. The masks have outer diameter of 12.5 mm, step formation at 10.5 mm, and slope of conical surfaces 15°. Its functionality has been tested in different lateral positions and tilts on a planar surface, and pig eye experiments. After successful validation on porcine eyes, new masks have been produced and tested on two patients. Results: The build-in eye tracking software of the MEL 70 was always able to capture the masks. It has been shown that the unwanted pigmentation/pattern induced by the laser pulses on the mask surface does not influence the eye-tracking efficiency. The masks could be tracked within the 18 × 14 mm lateral displacement and up to 12° tilt. Two patient cases are demonstrated. No complications were observed during the surgery, although it needs some attention for aligning the mask horizontally before trephination. Stability of eye tracking masks is emphasized by inducing on purpose movements of the patient head. Conclusion: Eye-tracking-guided penetrating keratoplasty was successfully applied in clinical practice, which enables robust tracking criteria within an extended range. It facilitates the automated trephination procedure of excimer laser-assisted penetrating keratoplasty
Prediction of corneal power vectors after cataract surgery with toric lens implantation-A vector analysis
Background
Intraocular lenses are typically calculated based on a pseudophakic eye model, and for toric
lenses (tIOL) a good estimate of corneal astigmatism after cataract surgery is required in
addition to the equivalent corneal power. The purpose of this study was to investigate the differences between the preoperative IOLMaster (IOLM) and the preoperative and postoperative Casia2 (CASIA) tomographic measurements of corneal power in a cataractous
population with tIOL implantation, and to predict total power (TP) from the IOLM and CASIA
keratometric measurements.
Methods
The analysis was based on a dataset of 88 eyes of 88 patients from 1 clinical centre before
and after tIOL implantation. All IOLM and CASIA keratometric and total corneal power measurements were converted to power vector components, and the differences between preoperative IOLM or CASIA and postoperative CASIA measurements were assessed.
Feedforward neural network and multivariate linear regression prediction algorithms were
implemented to predict the postoperative total corneal power (as a reference for tIOL calculation) from the preoperative IOLM and CASIA keratometric measurements.
Results
On average, the preoperative IOLM keratometric / total corneal power under- / overestimates the postoperative CASIA keratometric / real corneal power by 0.12 dpt / 0.21 dpt. The
prediction of postoperative CASIA real power from preoperative IOLM or CASIA keratometry shows that postoperative total corneal power is systematically (0.18 dpt / 0.27 dpt) shifted
towards astigmatism against the rule, which is not reflected by keratometry. The correlation
of postoperative CASIA real power to the corresponding preoperative CASIA values is better than those as compared to the preoperative IOLM keratometry. However, there is a
large variation from preoperative IOLM or CASIA keratometry to the postoperative CASIA
real power of up to 1.1 dpt (95% confidence interval).
Conclusion
One of the challenges of tIOL calculation is the prediction of postoperative total corneal
power from preoperative keratometry. Keratometric power restricted to a front surface measurement does not fully reflect the situation of corneal back surface astigmatism, which typically adds some extra against the rule astigmatism
Imaging the Cornea, Anterior Chamber, and Lens in Corneal and Refractive Surgery
Anterior segment OCT (AS-OCT) is an optical and noncontact imaging technology, which has numerous fields of application in the imaging of the cornea, anterior chamber, and the lens. In this chapter, we will present some of the application fields of AS-OCT in corneal, cataract, and refractive surgery. We will emphasize the potential of AS-OCT by several clinical examples including corneal imaging (keratoconus, keratoplasty, and refractive surgery) and intraocular lens imaging after refractive surgery. AS-OCT shows special potential for corneal imaging in case of corneal edema and for postoperative control after Descemet’s membrane endothelial keratoplasty (DMEK). The postoperative follow-up of a posterior chamber Collamer lens’ses vault and measuring the anterior chamber angle could be identified as another promising field of application for AS-OCT
Recommended from our members
EDOF intraocular lens design: shift in image plane vs object vergence
Background: To compare 2 different design scenarios of EDOF-IOLs inserted in the Liou-Brennan schematic model eye using raytracing simulation as a function of pupil size. Methods: Two EDOF IOL designs were created and optimized for the Liou-Brennan schematic model eye using Zemax ray tracing software. Each lens was optimized to achieve a maximum Strehl ratio for intermediate and far vision. In the first scenario, the object was located at infinity (O1), and the image plane was positioned at far focus (I1) and intermediate focus (I2) to emulate far and intermediate distance vision, respectively. In the second scenario, the image plane was fixed at I1 according to the first scenario. The object plane was set to infinity (O1) for far-distance vision and then shifted closer to the eye (O2) to reproduce the corresponding intermediate vision. The performance of both IOLs was simulated for the following 3 test conditions as a function of pupil size: a) O1 to I1, b) O1 to I2, and c) O2 to I1. To evaluate the imaging performance, we used the Strehl ratio, the root-mean-square (rms) of the spot radius, and the spherical aberration of the wavefront for various pupil sizes. Results: Evaluating the imaging performance of the IOLs shows that the imaging performance of the IOLs is essentially identical for object/image at O1/I1. Designed IOLs perform dissimilarly to each other in near-vision scenarios, and the simulations confirm that there is a slight difference in their optical performance. Conclusion: Our simulation study recommends considering the difference between object shift and image plane shift in design and test conditions to achieve more accurate pseudoaccommodation after cataract surgery
- …