Glutamatergic-dopaminergic balance in the brain. Its importance in motor disorders and schizophrenia

Dopamine appears to be of less importance in the regulation of psychomotor functions than was previously thought. A central dopaminergic-glutamatergic balance may be important for both akinetic motor disorders and psychosis. In Parkinson's disease glutamate antagonists may counteract central glutamatergic hyperactivity and may be of value as anti-parkinsonian drugs. An increase of dopaminergic activity and/or a reduction of glutamatergic activity may contribute to the development of paranoid hallucinatory psychosis in schizophrenic patients and of pharmacotoxic psychosis in Parkinson's disease. Because of possibly severe side-effects of glutamatergic antagonists and agonists in the treatment of akinesia and psychosis, the development of partial glutamate agonists/antagonists could be an alternative strategy capable of producing antipsychotic or anti-kinetic effects with only mild adverse reaction

Interstellar helium in interplanetary space

The velocity distribution function of He(+) in the solar wind at 1 AU is calculated with the assumption that the source is photoionization of a cold (T = 100 K), neutral interstellar wind. If the spiral magnetic field is noise free, the velocity distribution is diffuse and would not produce a peak at 4(E over Q) sub H in an E over Q particle spectrum. If the velocity of the interstellar wind with respect to the sun lies in the ecliptic, a large variation of the He(+) number density with respect to ecliptic longitude is expected

Stabilized hot electron bolometer heterodyne receiver at 2.5 THz

We report on a method to stabilize a hot electron bolometer (HEB) mixer at 2.5 THz. The technique utilizes feedback control of the local oscillator (LO) laser power by means of a swing-arm actuator placed in the optical beam path. We demonstrate that this technique yields a factor of 50 improvement in the spectroscopic Allan variance time which is shown to be over 30 s in a 12 MHz noise fluctuation bandwidth. Furthermore, broadband signal direct detection effects may be minimized by this technique. The technique is versatile and can be applied to practically any local oscillator at any frequency

Composite infrared bolometers with Si_3N_4 micromesh absorbers

We report the design and performance of 300-mK composite bolometers that use micromesh absorbers and support structures patterned from thin films of low-stress silicon nitride. The small geometrical filling factor of the micromesh absorber provides 20× reduction in heat capacity and cosmic ray cross section relative to a solid absorber with no loss in IR-absorption efficiency. The support structure is mechanically robust and has a thermal conductance, G < 2 × 10^(−11) W/K, which is four times smaller than previously achieved at 300 mK. The temperature rise of the bolometer is measured with a neutron transmutation doped germanium thermistor attached to the absorbing mesh. The dispersion in electrical and thermal parameters of a sample of 12 bolometers optimized for the Sunyaev–Zel’dovich Infrared Experiment is ±7% in R (T), ±5% in optical efficiency, and ±4% in G

Study of the application of hydrogen fuel to long-range subsonic transport aircraft, volume 2

The feasibility, practicability, and potential advantages/disadvantages of using liquid hydrogen as fuel in long range, subsonic transport aircraft of advanced design were studied. Both passenger and cargo-type aircraft were investigated. To provide a valid basis for comparison, conventional hydrocarbon (Jet A) fueled aircraft were designed to perform identical missions using the same advanced technology and meeting the same operational constraints. The liquid hydrogen and Jet A fueled aircraft were compared on the basis of weight, size, energy utilization, cost, noise, emissions, safety, and operational characteristics. A program of technology development was formulated

Investigation of a direction sensitive sapphire detector stack at the 5 GeV electron beam at DESY-II

Extremely radiation hard sensors are needed in particle physics experiments to instrument the region near the beam pipe. Examples are beam halo and beam loss monitors at the Large Hadron Collider, FLASH or XFEL. Currently artificial diamond sensors are widely used. In this paper single crystal sapphire sensors are considered as a promising alternative. Industrially grown sapphire wafers are available in large sizes, are of low cost and, like diamond sensors, can be operated without cooling. Here we present results of an irradiation study done with sapphire sensors in a high intensity low energy electron beam. Then, a multichannel direction-sensitive sapphire detector stack is described. It comprises 8 sapphire plates of 1 cm^2 size and 525 micro m thickness, metallized on both sides, and apposed to form a stack. Each second metal layer is supplied with a bias voltage, and the layers in between are connected to charge-sensitive preamplifiers. The performance of the detector was studied in a 5 GeV electron beam. The charge collection efficiency measured as a function of the bias voltage rises with the voltage, reaching about 10 % at 950 V. The signal size obtained from electrons crossing the stack at this voltage is about 22000 e, where e is the unit charge. The signal size is measured as a function of the hit position, showing variations of up to 20 % in the direction perpendicular to the beam and to the electric field. The measurement of the signal size as a function of the coordinate parallel to the electric field confirms the prediction that mainly electrons contribute to the signal. Also evidence for the presence of a polarisation field was observed.Comment: 13 pages, 7 figures, 3 table

Heat Capacity of Neutron Transmutation Doped Ge Type 18

We present measurements of the heat capacity of neutron transmutation doped (NTD) Ge temperature sensors from 100–300 mK. The NTD Ge sensor studied consists of a 30μm×100μm×250μm block of NTD Ge type 18 with the natural isotopic abundance, a doping of n = 5.6×10^(16) cm^(−3) and ion implanted and metallized contact pads. Each sensor was mounted on a freestanding silicon nitride (Si‐N) pad supported by Si‐N legs each with a cross section in the range 5–10 μm^2. Two of the Si‐N legs were metallized for electrical readout of the NTD Ge sensor. The measured heat capacity of the NTD Ge sensor, which includes the metalization and Si‐N pad, when fit to power law C = C_0T^γ yields C_0 = 4.3pJ/K^γ and γ = 1.6. The thermal conductance, GSi‐N, of the Si‐N support legs was measured over a larger temperature range 80–800 mK. We find G_(si‐N) at temperatures >200 mK of all 4 samples is at or below the 1D or quantum of thermal conductance limit

Quantum-state input-output relations for absorbing cavities

The quantized electromagnetic field inside and outside an absorbing high-$Q$ cavity is studied, with special emphasis on the absorption losses in the coupling mirror and their influence on the outgoing field. Generalized operator input-output relations are derived, which are used to calculate the Wigner function of the outgoing field. To illustrate the theory, the preparation of the outgoing field in a Schr\"{o}dinger cat-like state is discussed.Comment: 12 pages, 5 eps figure

Physical Electronics

Contains reports on two research projects