7 research outputs found
Spectral broadening of a single Ce3+-doped garnet by chemical unit cosubstitution for near ultraviolet LED
In this paper, the isostructural Mg3Al2Si3O12 was introduced into the Ce3+-doped yttrium aluminum garnet (Y3Al5O12) for synthesizing (Y1-xMgx)3Al2(Al1-xSix)3O12:Ce3+ (x = 0-0.6) solid solution phosphors. The co-substitution of the (Mg, Si)6+ pair for the (Y, Al)6+ pair leads to lattice shrinkage and then changes the spectral shape and width. The band peaking at ~450 nm shows a substantial broadening with the full width at half maximum increasing from 65 nm to 94 nm. The intensity of excitation spectrum (x = 0.5) at 400 nm is increased by 50% than that (x = 0). The near ultraviolet LED was fabricated with Y1.5Mg1.5Al3.5Si1.5O12:Ce3+ phosphors and a 400 nm chip and can emit strong white light. Therefore, by controlling the content of (Y, Al)6+ substituted by (Mg, Si)6+, the excitation spectrum of Ce3+-doped Y3Al5O12 can be tuned and applied for the near ultraviolet LEDs
Mn-Doped M<sub>2</sub>CdCl<sub>4</sub> (M = CH<sub>3</sub>NH<sub>3</sub><sup>+</sup>, C<sub>2</sub>H<sub>8</sub>N<sup>+</sup>, and C<sub>3</sub>H<sub>10</sub>N<sup>+</sup>) Layered Hybrid Perovskite and Its Flexible Film Based on Simple Mechanochemical Synthesis
Layered hybrid perovskites show significant
advantages in the field
of optoelectronics. However, the low quantum efficiency and complex
preparation methods limit their applications. In this work, we developed
a series of perovskite powders with a two-dimensional (2D) layered
structure of organic–inorganic hybrid metal halides M2CdCl4:x%Mn (M = CH3NH3+, C2H8N+, C3H10N+) via facile mechanochemical methods.
The prepared manganese Mn-doped MA2CdCl4 produces
orange emission at 605 nm under both 254 and 420 nm excitation, which
originates from a dual excitation channel competition mechanism, and
its excitation channel could be changed with the increase of Mn2+ ion concentration. Typically, MA2CdCl4:20%Mn powder exhibits high photoluminescence quantum yield (PLQY)
close to 90% at 605 nm due to the organic amine ions enlarging the
Mn–Mn interlayer distances. In addition, we prepared MA2CdCl4:x%Mn@PVA flexible films,
which also exhibit good luminescence at 254 nm excitation and were
unexpectedly found to have a better response to Cs+, which
could be a candidate for anticounterfeiting applications
Mn-Doped M<sub>2</sub>CdCl<sub>4</sub> (M = CH<sub>3</sub>NH<sub>3</sub><sup>+</sup>, C<sub>2</sub>H<sub>8</sub>N<sup>+</sup>, and C<sub>3</sub>H<sub>10</sub>N<sup>+</sup>) Layered Hybrid Perovskite and Its Flexible Film Based on Simple Mechanochemical Synthesis
Layered hybrid perovskites show significant
advantages in the field
of optoelectronics. However, the low quantum efficiency and complex
preparation methods limit their applications. In this work, we developed
a series of perovskite powders with a two-dimensional (2D) layered
structure of organic–inorganic hybrid metal halides M2CdCl4:x%Mn (M = CH3NH3+, C2H8N+, C3H10N+) via facile mechanochemical methods.
The prepared manganese Mn-doped MA2CdCl4 produces
orange emission at 605 nm under both 254 and 420 nm excitation, which
originates from a dual excitation channel competition mechanism, and
its excitation channel could be changed with the increase of Mn2+ ion concentration. Typically, MA2CdCl4:20%Mn powder exhibits high photoluminescence quantum yield (PLQY)
close to 90% at 605 nm due to the organic amine ions enlarging the
Mn–Mn interlayer distances. In addition, we prepared MA2CdCl4:x%Mn@PVA flexible films,
which also exhibit good luminescence at 254 nm excitation and were
unexpectedly found to have a better response to Cs+, which
could be a candidate for anticounterfeiting applications
Mn-Doped M<sub>2</sub>CdCl<sub>4</sub> (M = CH<sub>3</sub>NH<sub>3</sub><sup>+</sup>, C<sub>2</sub>H<sub>8</sub>N<sup>+</sup>, and C<sub>3</sub>H<sub>10</sub>N<sup>+</sup>) Layered Hybrid Perovskite and Its Flexible Film Based on Simple Mechanochemical Synthesis
Layered hybrid perovskites show significant
advantages in the field
of optoelectronics. However, the low quantum efficiency and complex
preparation methods limit their applications. In this work, we developed
a series of perovskite powders with a two-dimensional (2D) layered
structure of organic–inorganic hybrid metal halides M2CdCl4:x%Mn (M = CH3NH3+, C2H8N+, C3H10N+) via facile mechanochemical methods.
The prepared manganese Mn-doped MA2CdCl4 produces
orange emission at 605 nm under both 254 and 420 nm excitation, which
originates from a dual excitation channel competition mechanism, and
its excitation channel could be changed with the increase of Mn2+ ion concentration. Typically, MA2CdCl4:20%Mn powder exhibits high photoluminescence quantum yield (PLQY)
close to 90% at 605 nm due to the organic amine ions enlarging the
Mn–Mn interlayer distances. In addition, we prepared MA2CdCl4:x%Mn@PVA flexible films,
which also exhibit good luminescence at 254 nm excitation and were
unexpectedly found to have a better response to Cs+, which
could be a candidate for anticounterfeiting applications