Reading performance with various lamps in age-related macular degeneration

The purpose of this study was to determine if there was an objective difference in reading between four commonly available lamps, of varying spectral radiance, for 13 subjects with age-related maculopathy (ARM) or non-exudative age-related macular degeneration (AMD) - logMAR visual acuity between 0.04 and 0.68. At a constant illuminance of 2000 lux, there was no interaction between ARM and AMD subgroups and no statistically significant difference between the lamps: standard (clear envelope) incandescent, daylight simulation (blue tint envelope) incandescent, compact fluorescent and halogen incandescent, for any reading outcome measure (threshold print size p = 0.67, critical print size p = 0.74, acuity reserve p = 0.84 and mean reading rate p = 0.78). For lamps typically used in low-vision rehabilitation, a clinically significant effect of spectral radiance on reading for people with ARM or non-exudative AMD is unlikely. © 2007 The College of Optometrists

Continuous production of iron oxide nanoparticles via fast and economical high temperature synthesis

From all of the iron oxide nanoparticle (IONP) syntheses, thermal decomposition methods are the most developed for controlling particle properties, but suffer from poor reproducibility at larger scale. An alternative solution for large scale production is continuous synthesis, where the production volume can be increased with longer operation times. However, continuous thermal decomposition synthesis is not trivial as it requires oxygen and water removal from the precursor solution, reaction temperatures above 230 °C, and the formation of particles is likely to cause reactor fouling. This work presents a continuous thermal decomposition synthesis of IONPs using a tubular flow reactor, which provides inert reaction conditions at temperatures of up to 290 °C, and heating/cooling at rates which cannot be achieved in standard batch systems. This makes it possible to define the start and endpoint accurately, hence, allowing for a well-controlled and scalable thermal decomposition synthesis. A simple synthetic protocol was chosen using only ferric acetylacetonate, oleylamine, and 1-octadecene as a solvent, but no additives to minimise costs. In this flow reactor residence times of less than 10 min were shown to be sufficient to synthesise monodisperse IONPs of 5–7 nm and achieve precursor conversion between 10–70% depending on the reaction temperature. For all synthesis conditions tested, there was no indication of reactor fouling. Since the precursor conversion correlated to the residence time and reaction temperature, but particle sizes were comparable for all reaction conditions studied, the particle formation is proposed to follow mechanisms other than classical nucleation and growth. To examine possible economic advantages of such a continuous thermal decomposition process as compared to a conventional batch synthesis, a cost analysis, comparing costs assigned to chemicals, reactor equipment, energy and labour, was performed

Room-temperature emitters in wafer-scale few-layer hBN by atmospheric pressure CVD

Hexagonal boron nitride (hBN) is a two-dimensional, wide band gap semiconductor material suitable for several technologies. 2D hBN appeared as a viable platform to produce bright and optically stable single photon emitters (SPEs) at room temperature, which are in demand for quantum technologies. In this context, one main challenge concerns the upscaling of 2D hBN with uniform spatial and spectral distribution of SPE sources. In this work we optimized the atmospheric-pressure chemical vapor deposition (APCVD) growth and obtained large-area 2D hBN with uniform fluorescence emission properties. We characterized the hBN films by a combination of electron microscopy, Raman and X-ray photoelectron spectroscopy techniques. The extensive characterization revealed few-layer, polycrystalline hBN films (∼3 nm thickness) with balanced stoichiometry and uniformity over 2″ wafer scale. We studied the fluorescence emission properties of the hBN films by multidimensional hyperspectral fluorescence microscopy. We measured simultaneously the spatial position, intensity, and spectral properties of the emitters, which were exposed to continuous illumination over minutes. Three main emission peaks (at 538, 582, and 617 nm) were observed, with associated replica peaks red-shifted by ∼53 nm. A surface emitter density of ∼0.1 emitters/μm2 was found. A comparative test with pristine hBN nanosheets produced by liquid-phase exfoliation (LPE) was performed, finding that CVD and LPE hBN possess analogous spectral emitter categories in terms of peak position/intensity and density. Overall, the line-shape and wavelength of the emission peaks, as well as the other measured features, are consistent with single-photon emission from hBN. The results indicate that APCVD hBN might proficiently serve as a SPE platform for quantum technologies

Trapping shape-controlled nanoparticle nucleation and growth stages via continuous-flow chemistry

Continuous flow chemistry is used to trap the nucleation and growth stages of platinum-nickel nano-octahedra with second time resolution and high throughputs to probe their properties ex-situ. The growth starts from poorly crystalline particles (nucleation) at 5 seconds, to crystalline 1.5 nm particles bounded by the {111}-facets at 7.5 seconds, followed by truncation and further growth to octahedral nanoparticles at 20 seconds

Tuning the physicochemical features of titanium oxide nanomaterials by ultrasound: Elevating photocatalytic selective partial oxidation of lignin-inspired aromatic alcohols

The research for “green” and economically feasible approaches such as (photo)catalysis especially for biomass valorization such as selective oxidation of biomass derived compounds like aromatic alcohols to corresponding aldehyde by avoiding the harsh reaction conditions and the addition of reagents concentrate the focus of attention the last years. Hence, design and development of novel photocatalyst for the partial selective oxidation is highly desirable. In this research work, ultrasonication of different frequencies (22, 40, 80 kHz) and different amplitudes was utilized as synthesis tool in order to obtain novel materials by precipitation method. The synthesized samples were characterized by using different techniques such as N2 sorption, TEM, XPS, XRD, thermal analysis, and diffuse reflectance spectroscopy. The synthesized sample by using low ultrasound frequency (22 kHz) and amplitude showed a mixed morphological and structural nature consisting of asymmetric 1-dimensional (nanorods-like), layered nano-structures and not well-defined areas, leading to elevate for metal oxide specific surface areas up to 155 m2/g. The observed 1-D nanostructures have diamentions in the range of 20–60 nm. This sample revealed the highest photo-oxidation efficiency for the selective conversion of two biomass-derived, and more specifically lignin-inspired model compounds, benzyl alcohol and cinnamyl alcohol to benzaldehyde and cinnamyl aldehyde, respectively, and hence the highest yield towards the desired aldehydes. The selective photo-oxidation activity was retained even after 5 photocatalytic cycles, while no leaching of Ti was recorded

Iridium–Iron Diatomic Active Sites for Efficient Bifunctional Oxygen Electrocatalysis

Diatomic catalysts, particularly those with heteronuclear active sites, have recently attracted considerable attention for their advantages over single-atom catalysts in reactions involving multielectron transfers. Herein, we report bimetallic iridium−iron diatomic catalysts (IrFe−N−C) derived from metal−organic frameworks in a facile wet chemical synthesis followed by postpyrolysis. We use various advanced characterization techniques to comprehensively confirm the atomic dispersion of Ir and Fe on the nitrogen-doped carbon support and the presence of atomic pairs. The asobtained IrFe−N−C shows substantially higher electrocatalytic performance for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) when compared to the single-atom counterparts (i.e., Ir−N−C and Fe−N−C), revealing favorable bifunctionality. Consequently, IrFe−N−C is used as an air cathode in zinc− air batteries, which display much better performance than the batteries containing commercial Pt/C + RuO2 benchmark catalysts. Our synchrotron-based X-ray absorption spectroscopy experiments and density functional theory (DFT) calculations suggest that the IrFe dual atoms presumably exist in an IrFeN6 configuration where both Ir and Fe coordinates with four N atoms and two N atoms are shared by the IrN4 and FeN4 moieties. Furthermore, the Fe site contributes mainly to the ORR, while the Ir site plays a more important role in the OER. The dual-atom sites work synergistically, reducing the energy barrier of the rate-determining step and eventually boosting the reversible oxygen electrocatalysis. The IrFe−N−C catalysts hold great potential for use in various electrochemical energy storage and conversion devices.info:eu-repo/semantics/publishedVersio