Environmental factors influencing the spread of the highly pathogenic avian influenza H5N1 virus in wild birds in Europe

A large number of occurrences of the highly pathogenic avian influenza (HPAI) H5N1 virus in wild birds were reported in Europe. The relationship between the occurrence pattern and environmental factors has, however, not yet been explored. This research uses logistic regression to quantify the relationships between anthropogenic or physical environmental factors and HPAI H5N1 occurrences. Our results indicate that HPAI H5N1 occurrences are highly correlated with the following: the increased normalized difference vegetation index (NDVI) in December; intermediate NDVI in March; lower elevations; increased minimum temperatures in January; and reduced precipitation in January. A predictive risk map of HPAI H5N1 occurrences in wild birds in Europe was generated on the basis of five key environmental factors. Independent validation of the risk map showed the predictive model to be of high accuracy (79%). The analysis suggests that HPAI H5N1 occurrences in wild birds are strongly influenced by the availability of food resources and are facilitated by increased temperatures and reduced precipitation. We therefore deduced that HPAI H5N1 occurrences in wild birds in Europe are probably caused by contact with other wild birds and not by contact with domestic poultry. These findings are important considerations for the global surveillance of HPAI H5N1 occurrences in wild birds

An experimental study on the application of polyalcohol solid-solid phase change materials in solar drying with cross-corrugated solar air collectors

In this paper, two identical solar driers with the same cross-corrugated solar air collectors and drying chamber were developed, one with phase-change materials (PCMs) and the other without PCMs. These two solar drying systems were tested in typical sunny and cloudy days in Kunming and their thermal performances were analyzed. The experimental results show that the temperature changing is smoother in the collector with the PCMs, which is beneficial for the drying as the useful drying time was prolonged. The same trend was also found in the chamber with the PCMs. The PCMs in solar drying system was found to play a role in temperature regulating. There were several cycles of heat charging-discharging in a cloudy testing day while the temperatures on collectors and in chambers with the polyalcohol PCMs is higher than each phase-change temperature. Nevertheless, there was only one cycle of heat charging-discharging in a sunny testing day. The collector with PCMs has higher daily useful heat gain than the collector without PCMs

Bianchi type I space and the stability of inflationary Friedmann-Robertson-Walker space

Stability analysis of the Bianchi type I universe in pure gravity theory is studied in details. We first derive the non-redundant field equation of the system by introducing the generalized Bianchi type I metric. This non-redundant equation reduces to the Friedmann equation in the isotropic limit. It is shown further that any unstable mode of the isotropic perturbation with respect to a de Sitter background is also unstable with respect to anisotropic perturbations. Implications to the choice of physical theories are discussed in details in this paper.Comment: 5 pages, some comment adde

Friedmann Equation and Stability of Inflationary Higher Derivative Gravity

Stability analysis on the De Sitter universe in pure gravity theory is known to be useful in many aspects. We first show how to complete the proof of an earlier argument based on a redundant field equation. It is shown further that the stability condition applies to $k \ne 0$ Friedmann-Robertson-Walker spaces based on the non-redundant Friedmann equation derived from a simple effective Lagrangian. We show how to derive this expression for the Friedmann equation of pure gravity theory. This expression is also generalized to include scalar field interactions.Comment: Revtex, 6 pages, Add two more references, some typos correcte

Simulation of the stochastic wave loads using a physical modeling approach

In analyzing stochastic dynamic systems, analysis of the system uncertainty due to randomness in the loads plays a crucial role. Typically time series of the stochastic loads are simulated using traditional random phase method. This approach combined with fast Fourier transform algorithm makes an efficient way of simulating realizations of the stochastic load processes. However it requires many random variables, i.e. in the order of magnitude of 1000, to be included in the load model. Unfortunately having too many random variables in the problem makes considerable difficulties in analyzing system reliability or its uncertainty. Moreover applicability of the probability density evolution method on engineering problems faces critical difficulties when the system embeds too many random variables. Hence it is useful to devise a method which can make realization of the stochastic load processes with low, say less than 20, number of random variables. In this article we introduce an approach, so-called "physical modeling of stochastic processes", and show its applicability for simulation of the wave surface elevation.</jats:p

Alternatives to Sedum on green roofs: Can broad leaf perennial plants offer better ‘cooling service’?

Green roof plants alter the microclimate of building roofs and may improve roof insulation. They act by providing cooling by shading, but also through transpiration of water through their stomata. However, leaf surfaces can become warmer when plants close the stomata and decrease water loss in response to drying substrate (typically associated with green roofs during summers), also reducing transpirational cooling. By using a range of contrasting plant types (Sedum mix – an industry green roof ‘standard’, Stachys byzantina, Bergenia cordifolia and Hedera hibernica) we tested the hypothesis that plants differ in their ‘cooling potential’. We firstly examined how leaf morphology influenced leaf temperature and how drying substrate altered that response. Secondly, we investigated the relationship between leaf surface temperatures and the air temperatures immediately above the canopies (i.e. potential to provide aerial cooling). Finally we measured how the plant type influenced the substrate temperature below the canopy (i.e. potential for building cooling). In our experiments Stachys outperformed the other species in terms of leaf surface cooling (even in drying substrate, e.g. 5 oC cooler compared with Sedum), substrate cooling beneath its canopy (up to 12 oC) and even - during short intervals over hottest still periods - the air above the canopy (up to 1 oC, when soil moisture was not limited). We suggest that the choice of plant species on green roofs should not be entirely dictated by what survives on the shallow substrates of extensive systems, but consideration should be given to supporting those species providing the greatest eco-system service potential

Measurement of low‐density lipoprotein cholesterol levels in primary and secondary prevention patients: Insights from the PALM registry

Background The 2013 American College of Cardiology/American Heart Association Guideline on the Treatment of Blood Cholesterol to Reduce Atherosclerotic Cardiovascular Risk in Adults recommended testing low-density lipoprotein cholesterol ( LDL -C) to identify untreated patients with LDL -C ≥190 mg/dL, assess lipid-lowering therapy adherence, and consider nonstatin therapy. We sought to determine whether clinician lipid testing practices were consistent with these guidelines. Methods and Results The PALM (Patient and Provider Assessment of Lipid Management) registry enrolled primary and secondary prevention patients from 140 US cardiology, endocrinology, and primary care offices in 2015 and captured demographic data, lipid treatment history, and the highest LDL -C level in the past 2 years. Core laboratory lipid levels were drawn at enrollment. Among 7627 patients, 2787 (36.5%) had no LDL -C levels measured in the 2 years before enrollment. Patients without chart-documented LDL -C levels were more often women, nonwhite, uninsured, and non-college graduates (all P\u3c0.01). Patients without prior lipid testing were less likely to receive statin treatment (72.6% versus 76.0%; P=0.0034), a high-intensity statin (21.5% versus 24.3%; P=0.016), nonstatin lipid-lowering therapy (24.8% versus 27.3%; P=0.037), and had higher core laboratory LDL -C levels at enrollment (median 97 versus 92 mg/dL; P\u3c0.0001) than patients with prior LDL -C testing. Of 166 individuals with core laboratory LDL -C levels ≥190 mg/dL, 36.1% had no LDL -C measurement in the prior 2 years, and 57.2% were not on a statin at the time of enrollment. Conclusions In routine clinical practice, LDL -C testing is associated with higher-intensity lipid-lowering treatment and lower achieved LDL -C level

Applicability of perturbative QCD to Λb→Λc\Lambda_b \to \Lambda_c decays

We develop perturbative QCD factorization theorem for the semileptonic heavy baryon decay $\Lambda_b \to \Lambda_c l\bar{\nu}$, whose form factors are expressed as the convolutions of hard $b$ quark decay amplitudes with universal $\Lambda_b$ and $\Lambda_c$ baryon wave functions. Large logarithmic corrections are organized to all orders by the Sudakov resummation, which renders perturbative expansions more reliable. It is observed that perturbative QCD is applicable to $\Lambda_b \to \Lambda_c$ decays for velocity transfer greater than 1.2. Under requirement of heavy quark symmetry, we predict the branching ratio $B(\Lambda_b \to \Lambda_c l{\bar\nu})\sim 2$, and determine the $\Lambda_b$ and $\Lambda_c$ baryon wave functions.Comment: 12 pages in Latex file, 3 figures in postscript files, some results are changed, but the conclusion is the sam

Thermally assisted magnetization reversal in the presence of a spin-transfer torque

We propose a generalized stochastic Landau-Lifshitz equation and its corresponding Fokker-Planck equation for the magnetization dynamics in the presence of spin transfer torques. Since the spin transfer torque can pump a magnetic energy into the magnetic system, the equilibrium temperature of the magnetic system is ill-defined. We introduce an effective temperature based on a stationary solution of the Fokker-Planck equation. In the limit of high energy barriers, the law of thermal agitation is derived. We find that the N\'{e}el-Brown relaxation formula remains valid as long as we replace the temperature by an effective one that is linearly dependent of the spin torque. We carry out the numerical integration of the stochastic Landau-Lifshitz equation to support our theory. Our results agree with existing experimental data.Comment: 5 figure

Peculiarities of the stochastic motion in antiferromagnetic nanoparticles

Antiferromagnetic (AFM) materials are widely used in spintronic devices as passive elements (for stabilization of ferromangetic layers) and as active elements (for information coding). In both cases switching between the different AFM states depends in a great extent from the environmental noise. In the present paper we derive the stochastic Langevin equations for an AFM vector and corresponding Fokker-Planck equation for distribution function in the phase space of generalised coordinate and momentum. Thermal noise is modeled by a random delta-correlated magnetic field that interacts with the dynamic magnetisation of AFM particle. We analyse in details a particular case of the collinear compensated AFM in the presence of spin-polarised current. The energy distribution function for normal modes in the vicinity of two equilibrium states (static and stationary) in sub- and super-critical regimes is found. It is shown that the noise-induced dynamics of AFM vector has pecuilarities compared to that of magnetisation vector in ferromagnets.Comment: Submitted to EPJ ST, presented at the 4-th Conference on Statistical Physics, Lviv, Ukraine, 201