405 research outputs found
Direct-acting antivirals and visceral leishmaniasis: A case report
Background: Visceral leishmaniasis is a vector-borne parasitic disease caused by protozoa belonging to the genus Leishmania. The clinical presentation of visceral leishmaniasis strictly depends on the host immunocompetency, whereas depressive conditions of the immune system impair the capability to resolve the infection and allow reactivation from sites of latency of the parasite. Case presentation: We describe a case of visceral leishmaniasis (VL) that occurred in a patient with chronic hepatitis C treated with direct-acting antiviral drugs (DAA). The hypothesized mechanism is the alteration of protective inflammation mechanisms secondary to DAA therapy. Downregulation of type II and III IFNs, their receptors, which accompany HCV clearance achieved during treatment with sofosbuvir and ribavirin might have a negative impact on a risk for reactivation of a previous Leishmania infection. We know indeed that IFN-\u3b3 is important to enhance killing mechanisms in macrophages, which are the primary target cells of Leishmania. Conclusion: Since VL is endemic in Sicily as well as in other countries of the Mediterranean basin, physicians should be aware of the possible unmasking of cryptic Leishmania infection by DAAs
Regionalization of ports as a strategic leverage to improve competitiveness. A study on central italy ports and related hinterland
Nowadays, the success of a maritime port does not depend anymore on its traditional intrinsic points of strength, such as the internal capacity, but also on its ability to effectively integrate the development of its hinterland into business relations and supply chains. Mediterranean ports can get competitive, if specific "regionalization" processes are launched and supported. Key point for this strategy is the hinterland involvement: logistics and transports integration, railways, realization and development of dryports, terminals, distribution centres. All these are core elements for this purpose. The overall focus has changed from port performances to performance of the entire supply chain in the port-hinterland relationship. This is what it is going to do the Port of Civitavecchia, the most important port in Lazio Region, would like to become the central point into commercial, industrial and infrastructural development of central Italy. The development of railway terminal and of regional road network for the developing of intermodal logistics chain, of the industrial port activities (shipbuilding sector and oil bunkering), of trade relations with Fiumicino Airport and with the roman agroindustrial sector, of logistics relations with the dryport of Orte and with the intermodal terminal (road-railway) of Pomezia Santa Palomba, are some of the activities planned and undertaken by the port for improving the regionalization of Civitavecchia. Aim of this paper is to show and underline how these regionalization processes can increase the development, and so benefit the entire regional hinterland and the competitiveness and attraction of the entire port system. A model to estimate the regionalization effect has been designed by the authors and implemented to make a comparison analysis between Civitavecchia and competing ports. © 2021 Georg Thieme Verlag. All rights reserved
Contact between the components of a knee prosthesis: numerical and experimental study
The aim of this work is the analysis of the contact area in a knee prosthesis using two different approaches. In particular, the interface between the femoral component and the polyethylene insert has been studied both numerically and experimentally. The interest in studying the contact area is related to the fact that the wear of the polyethylene insert, due to the high contact pressures, represents one of the major causes of failure of the total knee prosthesis. The possibility to evaluate the contact area at different loads and mutual position between femur and tibia is, therefore, of fundamental importance to study the service life of a prosthesis and to improve its performance. The finite element numerical approach has required the acquisition, through reverse engineering, and CAD modelling of the prosthetic components. Then the FEM simulations have been developed considering two different load conditions. In order to compare the calculated data, the same load configurations have been used for experimental tests based on ultrasonic method. In this case, some preliminary tests were required to calibrate the system depending on the particular characteristics of materials, geometries and surface finish of the prosthesis.The results show a good correlation between the data obtained with the two different approaches and, consequently, a good level of reliability of the procedures developed for the numerical and experimental evaluation of the contact area. The numerical procedure can be used to determine the area for different angles and loads, but especially in the design phase. The ultrasonic technique can be used to validate the numerical data
Mediterranean spotted fever in paediatric and adult patients: two clinical aspects of the same disease
Contact between the components of a knee prosthesis: numerical and experimental study
The aim of this work is the analysis of the contact area in a knee prosthesis using two different approaches. In particular, the interface between the femoral component and the polyethylene insert has been studied both numerically and experimentally. The interest in studying the contact area is related to the fact that the wear of the polyethylene insert, due to the high contact pressures, represents one of the major causes of failure of the total knee prosthesis. The possibility to evaluate the contact area at different loads and mutual position between femur and tibia is, therefore, of fundamental importance to study the service life of a prosthesis and to improve its performance. The finite element numerical approach has required the acquisition, through reverse engineering, and CAD modelling of the prosthetic components. Then the FEM simulations have been developed considering two different load conditions. In order to compare the calculated data, the same load configurations have been used for experimental tests based on ultrasonic method. In this case, some preliminary tests were required to calibrate the system depending on the particular characteristics of materials, geometries and surface finish of the prosthesis.The results show a good correlation between the data obtained with the two different approaches and, consequently, a good level of reliability of the procedures developed for the numerical and experimental evaluation of the contact area. The numerical procedure can be used to determine the area for different angles and loads, but especially in the design phase. The ultrasonic technique can be used to validate the numerical data
Improving sustainable mobility in university campuses. The case study of Sapienza University
The pursue of sustainable mobility is one of the greatest environmental challenges nowadays. It requires a people mind shift, where the use of private vehicles give way to different modes of public transport like buses, bicycles, car sharing, electric cars, and walking lanes. This new call to make mobility sustainable has already been undertaken by policymakers and public managers in many urban contexts around the world, as well as, more recently, by the managers of university systems. The paper shows the work developed in 2018 for the Sapienza Sustainable University Mobility Plan (SUMP). The study stems from the need to understand and improve, in the sustainability direction, modes of travel for the students and staff of one of the oldest universities in the world, and one of the largest in Europe (112,142 students enrolled and 23,101 between academic staff and no academic staff), with its premises located in a complex and challenging urban context such as the city of Rome. The SUMP has been developed in two phases. The first one investigated travel patterns and the reasons for the modal shift and highlighted the main issues. The second phase defined strategies and interventions to be implemented in the short, medium, and long term to make students and staff's mobility more environmentally sustainable. The methodology used in the fact-finding stage was the online survey that was carried out through the use of a diversified questionnaire for staff and students of the University. The sample of students who participated in the survey amounted to 14,719 units, while the sample of faculty and staff was 9,403. The main questionnaire outcomes showed that the attitudes recorded were largely different between faculty and staff and students. While for the first ones the choice of private vehicles is the first option (36%), for students public transport is the prevailing preference (78%). According to the critical aspects found in this first stage, the SUMP objectives were defined, leading to the identification of macro-areas of intervention and specific actions. At a policy and strategic level, the attention was focused on the guidelines issued by the United Nations, the European Commission, and the Network of Universities for Sustainable Development, of which Sapienza University is a member. For this reason, the identification of strategies and interventions results from the combination of the first phase analysis, the Sapienza Governance objectives, and the national and international context in which the SUMP was drafted. Five macro-areas of intervention have been identified: Smart Strategies, Pedestrian Mobility, Cycling, Local Public Transport, Private Transport, and for each one specific intervention to be implemented in different time frames have been defined
Serological screening for Leishmania infantum in asymptomatic blood donors living in an endemic area (Sicily, Italy)
The purpose of our study was to assess whether Leishmania infantum parasitemia occurs in asymptomatic Leishmania-seropositive subjects. Samples from 500 blood donors were tested using an enzyme-linked immunosorbent assay (ELISA). Anti-Leishmania antibodies were not found in any sample. Our findings suggest that the risk of L. infantum transmission by blood transfusion in Sicily is very low
Atrial fibrillation in Mediterranean spotted fever
Mediterranean spotted fever (MSF) is a tick-borne acute febrile disease caused by Rickettsia conorii and characterized by fever, maculo-papular rash and a black eschar at the site of the tick bite ('tache noir'). We describe the case of a 58-year-old man affected by MSF who developed atrial fibrillation. The patient presented himself to the hospital after 7 days of fever, malaise and severe headache. Cardiac auscultation revealed a chaotic heart rhythm and an electrocardiogram confirmed atrial fibrillation with a fast ventricular response. Diagnosis of MSF was made after the appearance of a maculo-papular skin rash, and treatment with oral doxycycline was started. An immunofluorescence antibody test confirmed R. conorii infection. The patient recovered after 7 days of treatment. Cardiac arrhythmia is a rare complication of MSF. Inflammation may play a role in the pathogenesis of atrial fibrillation. R. conorii is an intracellular bacterium which could trigger atrial fibrillation. Our patient was previously healthy and had no reported history of cardiac disease. This suggests that heart function should be monitored in MSF patients even in the absence of underlying risk factors
- …