Experimental characterization of friction properties of materials for innovative beam-to-column dissipative connection for low-damage RC structures

Low-damage design of structures in seismic-prone areas is becoming an efficient strategy to obtain "earthquake-proof" buildings, i.e. buildings that, even in the case of severe seismic actions, experience a low or negligible amount of damage. Besides the safeguard of human lives, this design strategy aims also to limit the downtime of buildings, which represents a significant source of economic loss, and to ensure an immediate occupancy in the aftermath of an earthquake. In this context, focusing on moment-resisting frames (MRFs), several solutions have been developed for the beam-to-column connections (BCCs) of steel and precast/prestressed concrete structures, but very few for cast-in-situ reinforced concrete (RC) structures. This paper focuses on a recently-proposed friction-based BCC for MRFs made with hybrid steel-trussed concrete beams (HSTCBs). The latter are made by a spatial lattice built using V-shaped rebars and a steel bottom plate, which eases the introduction of a friction dissipative device. HSTCBs are usually characterized by a small effective depth, which leads to a large amount of longitudinal rebars. The latter, together with a small-sized beam-column joint, make it potentially subjected to severe damage, which reduces its dissipative capacity. The shear force acting on the joint can be reduced by endowing the BCC with a friction device, with the aim of increasing the lever arm of the bending moment transferred between beam and joint, preventing the latter from damage. To evaluate the mechanical performance of the above connection, two experimental programs have been carried out at the Structures Laboratory of the University of Palermo. The first one focused on the characterization of the friction properties of two different materials (thermal sprayed aluminum and brass), by means of a linear dissipative device subjected to cyclic load. The second one tested a beam-to-column subassembly endowed with the recently-proposed connection in which the dissipative device was made with the best performing friction material tested before. The results of the cyclic tests are presented and commented, showing the promising performance of such connection in providing a low-damage behavior and a satisfactory dissipative capacity

Innovative connections for steel-concrete-trussed beams: a patented solution

The most recent design strategies welcome the adoption of innovative techniques for seismic energy input mitigation, aiming to achieve high dissipation capacity, prevent the structure from collapse and ensure the serviceability of the construction. Friction damper devices have been widely adopted in framed steel structures for decades, while their introduction in different structural types is still under investigation. This paper presents the outcomes of innovative research supported by the industry and conducted on beam-to-column connections of RC structures in which the beams are Hybrid Steel-Trussed Concrete Beams (HSTCBs) and the columns are classical RC pillars. An innovative solution, recently patented, has been found for the mitigation of the effects of seismic cyclic actions on small-sized beam-column joints, typically characterised by a large amount of longitudinal reinforcement due to the small effective depth of the beam. This paper collects the main featuring steps of the innovative research, which has led to the patented solution. The calculation procedure for designing the proposed connection is shown, and the validation through 3D finite element modelling is described. For the structural analysis of the joint, several monotonic and cyclic simulations have been carried out with the scope of investigating different design moment values. The finite element results proved that the patented solution is effective in preventing beam, column and joint from damage and it is suitable for exhibiting adequate dissipative capacity ensured by a flexural behaviour dominated by wide and stable hysteresis loops

Seismic Performance of Earthquake-Resilient RC Frames Made with HSTC Beams and Friction Damper Devices

Seismic behavior of RC frames with hybrid steel-trussed concrete beams is affected by panel zone damage due to a large amount of longitudinal reinforcement. Here the seismic efficiency of innovative frames characterized by friction damper devices (FDDs) at beam-to-column connections is compared against traditional frame. Three configurations are investigated: FDDs alone; FDDs with column-to-foundation connections having preloaded threaded bars and disk springs; FDDs with self-centering friction devices. Non-linear analyses show that FDDs alone prevent plastic hinge formation at beam ends and beam–column joint damage. FDDs with self-centering friction devices effectively limit both peak and residual drifts, avoiding column base plasticization

Low-Damage Friction Connections in Hybrid Joints of Frames of Reinforced-Concrete Buildings

Seismic-resilient buildings are increasingly designed following low-damage and free-from-damage design strategies that aim to protect the structure’s primary load-bearing systems under ultimate-level seismic loads. With this scope, damping devices are located in accessible and easy-to-inspect sites within the main structural frames where the damage concentrates, allowing the primary structure to remain mostly undamaged or easily repairable after a severe earthquake. This paper analyses the effects of friction-damping devices in structural joints of RC buildings endowed with hybrid steel-trussed concrete beams (HSTCBs) and standard RC columns. The study proposes innovative solutions to be adopted into RC moment-resisting frames (MRFs) at beam-to-column connections (BCCs) and column-base connections (CBCs). The cyclic behaviour of the joint is analysed through 3D finite element models, while pushover and non-linear time history analyses are performed on simple two-storey and two-span MRFs endowed with the proposed devices. The main results show that the BCC endowed with curved slotted holes and Perfobond connectors is the most effective in preventing the damage that might occur in beam, column, and joint, and it is adequate to guarantee good dissipative properties. For CBCs, the results showed that the re-centering system with friction pads is the most effective in containing the peak and residual drifts, preventing the plasticization of the column base

Effectiveness of defatted seed meals from Brassicaceae with or without crude glycerin against black grass ( Alopecurus myosuroides Huds.)

Herbicide resistance has become an increasing problem, and at the same time pesticide usage is declining due to stringent EU pesticide legislation which aims to reduce the impact on environment and human health. For these reasons, new alternative integrated weed management approaches are becoming increasingly relevant. Formulations based on Brassica defatted seed meals (DSMs) and glycerin, have previously been shown to be effective in reducing the germination of lettuce seed. In this work five DSMs, formulated with and without crude glycerin, were chosen for in vitro and glasshouse experiments: i) Brassica nigra, ii) Brassica tournefortii, iii) Eruca sativa, iv) Rapistrum rugosum and v) Sinapis alba. Black-grass (Alopecurus myosuroides), a weed demonstrating extensive herbicide resistance, was used as a target, and the germination inhibition caused on this weed by Brassica defatted seed meals was assessed. In both in vitro and in vivo experiments, the most effective DSM for inhibiting germination of both lettuce and black-grass seeds was the sinigrin containing DSM, Brassica nigra. The aim of the manuscript was to suggest a new high value application for Brassicas derived DSM as a co-products from the vegetable oil production chain. The proposed treatments could represent an interesting and 100% novel natural alternative to the conventional herbicides