2,670 research outputs found
Importance of DTM accuracy, precision and acquisition technique for estimating contributing areas of post-fire erosion at the slope and catchment scale
Wildfires are a frequent phenomenon in Portugal, affecting over 300.000 ha in dry years like 2003 and 2005. Directly and/or indirectly, wildfires can strongly enhance the hydrological response and associated sediment losses and, thereby, negatively affect land-use sustainability as well as ecosystem functioning of downstream aquatic habitats. Therefore, the EROSFIRE projects aim at developing a GIS-tool for predicting soil erosion hazard following wildfire and post-fire land management practices. Assessment and modeling of runoff and soil erosion rates critically depends on accurate estimates of the contributing areas. In the case of catchments as well as unbounded erosion plots (arguably, the only practical solution for slope-scale measurements), delineation of contributing area requires a Digital Terrain Model (DTM) with an adequate resolution and accuracy. The DTM that was available for the Colmeal study area (Goís municipality, central Portugal) was that of the 1:25.000 topographic map produced by the Military Geographic Institute. Since this study area involves a rather small experimental catchment of roughly 10 ha and relatively short study slopes of less than 100 m long, two different data acquisition techniques were used to produce high-resolution and high-accuracy DTM. One is aerial photogrammetry, whilst the other is terrestrial laser scanning. To produce a DTM by photogrammetric means, a dedicated digital aerial photography mission was carried out. The images had a pixel size of 10 cm. Manual measurements permitted to measure breaklines and were complemented by automatic measurements. In this way, a DTM in a TIN format was produced. This was further converted to grid format using the ArcGIS software system. Signalized control points allowed obtaining the DTM in the same global reference system as that employed for terrestrial laser scanning. The terrestrial laser scanning was done using a Riegl LMS Z360I, stationed in 8 points within the area to provide a complete coverage. The resulting dense cloud of points was filtered – by the company carrying out the scanning mission - to remove the non-terrain points (in particular vegetation). Several grids of different sizes were produced (0.10 x 0.10, 0.20 x 0.20, 0.50 x 0.50, 1 x 1 and 2 x 2 m2). The proposed work will compare and analyze estimates of contribution areas that were obtained with the two above-mentioned data acquisition techniques and for different spatial resolutions. This will be done for selected slope-scale sediment fences as well as for the outlet of the experimental catchment. In addition, different algorithms available in ArcGIS for TIN-to-grid conversion will be compared, since preliminary results have suggested that these procedures produce markedly different results
Effect of the Resolution and Accuracy of DTM produced with Aerial Photogrammetry and Terrestrial Laser Scanning on Slope- and Catchment-scale Erosion Assessment in a Recently Burnt Forest Area: a Case Study
Wildfires are a common phenomenon in Portugal, affecting on average 100.000 ha of rural areas per year and up to 400.000 ha in dramatic years like 2003 and 2005. Wildfires can strongly enhance the hydrological response and associated sediment losses in recently burnt forest catchments and, thereby, negatively affect land-use sustain- ability of the affected terrains as well as ecosystem functioning of downstream aquatic habitats. Therefore, the EROSFIRE-I and –II projects aim at developing a GIS-tool for predicting soil erosion hazard following wildfire and, ultimately, for assessing the implications of alternative post-fire land management practices.
Assessment of runoff and soil erosion rates critically depends on accurate estimates of the corresponding runoff areas. In the case of catchments as well as unbounded erosion plots (arguably, the only practical solution for slope-scale measurements), delineation of runoff area requires a Digital Terrain Model (DTM) with an adequate resolution and accuracy. The DTM that was available for the Colmeal study area, localized in the mountain range of Lousã, in the central part of Portugal, of EROSFIRE-II project is that of the 1:25.000 topographic map produced by the Military Geographic Institute. Since the Colmeal area involves a rather small experimental catchment of roughly 10 ha and relatively short study slopes of less than 100 m long, two different data acquisition techniques were used to produce high-resolution and high-accuracy DTM. One of the data acquisition techniques is aerial photogrammetry whilst the other is terrestrial laser scanning. In order to produce a DTM by photogrammetric means, a dedicated digital aerial photography mission was carried out. The images have a pixel size of 10 cm. Manual measurements permitted to measure breaklines and were complemented by automatic measurements. In this way, a DTM in a TIN format was produced. This was further converted to grid format using the ArcGIS software system. Signalized control points allowed obtaining the DTM in the same global reference system as that employed for terrestrial laser scanning. The terrestrial laser scanning was done using a Riegl LMS Z360I, stationed in 8 points within the area to provide a complete coverage. The resulting dense cloud of points was filtered – by the company carrying out the scanning mission - to remove the non-terrain points (in particular vegetation). Several grids of different sizes were produced (0.10 x 0.10, 0.20 x 0.20, 0.50 x 0.50, 1 x 1 and 2 x 2 m2).
This work will study the effect on runoff and erosion rates at the slope- and catchment-scale of DTM with differ- ent resolution, but produced with data collected with the same acquisition technique, and of DTM with the same resolution, but produced with data collected with the two different acquisition techniques. The study is being carried out in ArcGIS using DTM in a grid format. Preliminary results suggest that the conver- sion of TIN-to-grid in ArcGIS produces results that depend on the procedure being applied. Therefore, the different algorithms available at ArcGIS for TIN-to-grid conversion are currently being tested, using an artificially produced DTM. This testing includes various interpolation techniques for grid generation, and will be extended to different algorithms for computation of drainage flow direction
Trajectory Deflection of Spinning Magnetic Microparticles, the Magnus Effect at the Microscale
The deflection due to the Magnus force of magnetic particles with a diameter
of 80 micrometer dropping through fluids and rotating in a magnetic field was
measured. With Reynolds number for this experiment around 1, we found
trajectory deflections of the order of 1 degree, in agreement within
measurement error with theory. This method holds promise for the sorting and
analysis of the distribution in magnetic moment and particle diameter of
suspensions of microparticles, such as applied in catalysis, or objects loaded
with magnetic particles.Comment: 12 pages, 3 figures. Appendix with 6 figure
Benchmarking high fidelity single-shot readout of semiconductor qubits
Determination of qubit initialisation and measurement fidelity is important
for the overall performance of a quantum computer. However, the method by which
it is calculated in semiconductor qubits varies between experiments. In this
paper we present a full theoretical analysis of electronic single-shot readout
and describe critical parameters to achieve high fidelity readout. In
particular, we derive a model for energy selective state readout based on a
charge detector response and examine how to optimise the fidelity by choosing
correct experimental parameters. Although we focus on single electron spin
readout, the theory presented can be applied to other electronic readout
techniques in semiconductors that use a reservoir.Comment: 19 pages, 8 figure
Runoff at the micro-plot and slope scale following wildfire, central Portugal
Through their effects on soil properties and vegetation/litter cover, wildfires can strongly enhance overland flow generation and accelerate soil erosion [1] and, thereby, negatively affect land-use sustainability as well as downstream aquatic and flood zones. Wildfires are a common phenomenon in present-day Portugal, devastating in an average year some 100.000 ha of forest and woodlands and in an exceptional year like 2003 over 400.000 ha. There therefore exists a clear need in Portugal for a tool that can provide guidance to post-fire land management by predicting soil erosion risk, on the one hand, and, on the other, the mitigation effectiveness of soil conservation measures. Such a tool has recently been developed for the Western U.S.A. [3: ERMiT] but its suitability for Portuguese forests will need to be corroborated by field observations.
Testing the suitability of existing erosion models in recently burned forest areas in Portugal is, in a nutshell, the aim of the EROSFIRE projects. In the first EROSFIRE project the emphasis was on the prediction of erosion at the scale of individual hill slopes. In the ongoing EROSFIRE-II project the spatial scope is extended to include the catchment scale, so that also the connectivity between hill slopes as well as channel and road processes are being addressed. Besides ERMiT, the principal models under evaluation for slope-scale erosion prediction are: (i) the variant of USLE [4] applied by the Portuguese Water Institute after the wildfires of 2003; (ii) the Morgan–Morgan–Finney model (MMF) [5]; (iii) MEFIDIS [6]. From these models, MEFIDIS and perhaps MMF will, after successful calibration at the slope scale, also be applied for predicting catchment-scale sediment yields of extreme events
Runoff and erosion at the micro-plot and slope scale in a small burnt catchment, central Portugal
Wildfires can have important impacts on hydrological processes and soil erosion in forest catchments, due to the destruction of vegetation cover and changes to soil properties. However, the processes involved are non-linear and not fully understood. This has severely limited the understanding on the impacts of wildfires, especially in the up-scaling from hillslopes to catchments; in consequence, current models are poorly adapted for burnt forest conditions.
The objective of this presentation is to give an overview of the hydrological response and sediment yield from the micro-plot to slope scale, in the first year following a wildfire (2008/2009) that burnt an entire catchment nearby the Colmeal village, central Portugal. The overview will focus on three slopes inside the catchment, with samples including:
• Runoff at micro-plot scale (12 bounded plots) and slope scale (12 open plots); • Sediments and Organic Matter loss at micro-plot scale (12 bounded plots) and slope scale (12 open plots plus 3 Sediment fences); • Rainfall and Soil moisture data; • Soil Water Repellency and Ground Cover data.
The analysis of the first year following the wildfire clearly shows the complexity of runoff generation and the associated sediment transport in recently burnt areas, with pronounced differences between hillslopes and across spatial scales as well as with marked variations through time.
This work was performed in the framework of the EROSFIRE-II project (PTDC/AGR-CFL/70968/2006) which has as overall aim to predict soil erosion risk in recently burnt forest areas, including common post-fire forest management practices; the project focuses on the simultaneous measurement of runoff and soil erosion at multiple spatial scales.The results to be presented in this session are expected to show how sediment is generated, transported and exported in the Colmeal watershed; and contribute to understand and simulate erosion processes in burnt catchments, including for model development and evaluation
Hydrological and erosion response at micro-plot to -catchment scale following forest wildfire, north-central Portugal
Wildfires can have important impacts on hydrological and soil erosion processes, due to the destruction of vegetation cover and changes to soil properties. According to Shakesby and Doerr (2006), these wildfire effects are: i) much better known at small spatial scales (especially erosion plots) than at the scale of catchments; ii) much better studied with respect to overland flow and streamflow (and, then, especially peak discharges) than to soil erosion. Following up on a precursor project studying runoff generation and the associated soil losses from micro-plot to slope-scale in Portuguese eucalypt forests, the EROSFIRE-II project addresses the connectivity of these processes across hillslopes as well as within the channel network.
This is done in the Colmeal study area in central Portugal, where the outlet of an entirely burnt catchment of roughly 10 ha was instrumented with a gauging station continuously recording water level and tubidity, and five slopes were each equipped with 4 runoff plots of < 0,5 m2 (“micro-plot”) and 4 slope-scale plots as well as 1 slope-scale sediment fence. Starting one month after the August 2008 wildfire, the plots were monitored at 1- to 2-weekly intervals, depending on the occurrence of rainfall. The gauging station became operational at the end of November 2008, since the in-situ construction of an H-flume required several weeks.
A preliminary analysis of the data collected till the end of 2008, focusing on two slopes with contrasting slope lengths as well as the gauging station: revealed clear differences in runoff and erosion between: (i) the micro-plot and slope-scale plots on the same hillslope; (ii) the two slopes; (iii) an initial dry period and a subsequent much wetter period; (iv) the slopes and the catchment-scale, also depending on the sampling period. These results suggest that the different processes govern the hydrological and erosion response at different spatial scales as well as for different periods, with soil water repellency playing a role during the initial post-fire period.
The current presentation will review these preliminary results based on the data collected during the first year after the wildfire
The Efficiency of the Assay for Haemopietic Colony Forming Cells
The quantitative efficiency of the spleen colony assay in mice is discussed in the light of recent findings on the kinetics of colony forming cells. Arguments are presented showing that the f factor, the 2 hr CFU recovery fraction in the spleen, markedly over‐estimates the assay efficiency which is the ratio of the numbers of colony forming units and colony forming cells. Copyrigh
- …