141 research outputs found
A proposal of a UCN experiment to check an earthquake waves model
Elastic waves with transverse polarization inside incidence plane can create
longitudinal surface wave (LSW) after reflection from a free surface. At a
critical incidence angle this LSW accumulates energy density, which can be
orders of magnitude higher than energy density of the incident transverse wave.
A specially arranged vessel for storage of ultracold neutrons (UCN) can be used
to verify this effect.Comment: 8 pages 3 figures added a paragraph on vibrations along surface at
critical angl
Estimation of crack control reliability for aircraft structures
Достоверность обнаружения трещин методами неразрушающего контроля (НК)
определяется вероятностью обнаружения дефекта с заданным размером а – POD(a). Показано, что
этот показатель определяет надежность всей системы НК, включая человеческий фактор. На примере
использования вероятностного подхода Бейеса с учетом POD(a) показана возможность некорректного
обоснования эмпирического распределения размера дефектов.The realization of the damage tolerance concept for aviation structures is defined appreciably
by solution of a problem of the damage detection reliability by nondestructive inspection (NDI) methods. The
reliability of cracks detection by NDI methods is defined by probability of detection of the given flow size a –
POD (a). The reliability index of the NDI taking into account the reliability of the flow detection or miss POD
(a) is the probability of the crack size detection more than a. Another reliability index of the NDI system, which
depends on POD (a), is the missing probability of the crack size more than a. It is shown that POD (a) defines
reliability of all NDI system, including the human factor. The example of a wing surface control by eddy currents
is considered for the plane round rivet holes in knots of skin and stringer fastening. The distribution of the
detected crack length is described by a Weibull distribution (a posteriori distribution). However, this distribution
cannot be accepted as correct because the part of cracks will be not detect under control (especially small sizes
cracks). It is shown that a priori (valid) crack length distribution can be defined by using of the Bayesian
probabilistic approach, which essentially differs from initial Weibull distribution. The approach offered in this
paper is useful to an estimation of a technical condition of aircraft structures by results of operation defects
testing
Those wonderful elastic waves
We consider in a simple and general way elastic waves in isotropic and
anisotropic media, their polarization, speeds, reflection from interfaces with
mode conversion, and surface waves. Reflection of quasi transverse waves in
anisotropic media from a free surface is shown to be characterized by three
critical angles.Comment: 11 Figures 26 page
Neutron-antineutron Oscillations in the Trapping Box
We have reexamined the problem of oscillations for ultra-cold
neutrons (UCN) confined within a trap. We have shown that the growth of the
component with time is to a decent accuracy given by where is the mixing parameter,
sec in the neutron propagation time between subsequent collisions
with the trap walls. Possible corrections to this law and open questions are
discussed.Comment: 11 pages, LaTeX2
Entanglement production with multimode Bose-Einstein condensates in optical lattices
Deep optical lattices are considered, in each site of which there are many
Bose-condensed atoms. By the resonant modulation of trapping potentials it is
possible to transfer a macroscopic portion of atoms to the collective nonlinear
states corresponding to topological coherent modes. Entanglement can be
generated between these modes. By varying the resonant modulating field it is
possible to effectively regulate entanglement production in this multimode
multitrap system of Bose condensates.Comment: Latex file, 16 pages, 7 figure
Rayleigh Imaging of Graphene and Graphene Layers
We investigate graphene and graphene layers on different substrates by
monochromatic and white-light confocal Rayleigh scattering microscopy. The
image contrast depends sensitively on the dielectric properties of the sample
as well as the substrate geometry and can be described quantitatively using the
complex refractive index of bulk graphite. For few layers (<6) the
monochromatic contrast increases linearly with thickness: the samples behave as
a superposition of single sheets which act as independent two dimensional
electron gases. Thus, Rayleigh imaging is a general, simple and quick tool to
identify graphene layers, that is readily combined with Raman scattering, which
provides structural identification.Comment: 8 pages, 9 figure
О целесообразности строительства мини-ТЭЦ на местных видах топлива в условиях Республики Беларусь. Часть 2. Роль мини-ТЭЦ в системах теплоснабжения городов и населенных пунктов Беларуси
. Within the framework of ensuring the country's energy security and pursuing a policy of decarbonization of the economy in the Republic of Belarus, it is assumed to maximize the use of its own fuel and energy resources (TER). However, the question of choosing the type of heat source in centralized heat supply systems when using local fuels (LF) remains open. The commissioning of the Belarusian Nuclear Power Plant and the relatively high unit cost of power generation capacities running on LF inclines the scales to use boiler houses as heat sources. Based on the world experience in the development and application of heating as the most energy-efficient solution in the field of heat supply, this problem has been studied in the conditions of Belarus. It is shown that the electric capacity of mini-thermal power plants using traditional LF connected to the unified system of the country is less than 100 MW, and the main technologies implemented at mini-thermal power plants using LF in the Republic of Belarus are traditional steam power plants with water steam as the working fluid (11 power plants) and steam power plant with organic Rankine cycle (ORC) (3 power plants). Geographically, mini- thermal power plants operating on LF are located evenly throughout the entire territory of the Republic of Belarus. The number of hours of use of the installed capacity of renewable energy sources (RES) of the Republic of Belarus has been determined. Energy sources based on organic waste and biomass (over 4,000 hours per year) and on hydro resources (about 3,500 hours per year) have a clear advantage, for which indicator of the number of hours of installed capacity use is much higher than for solar and wind power installations. In addition, biomass generating capacities have the lowest coefficient of electricity supply to the combined energy system. Based on the analysis of modern trends in the development of energy, technical and economic “attractiveness factors” for the construction of heating systems for heat supply on LF in the conditions of Belarus have been formulated, which, in addition to traditional factors (substitution of imported fuel – natural gas and oil), include improvement of the quality and reliability of energy supply to consumers in remote locations, development of polygeneration, reduction of losses of electric energy for its transport, participation in covering the electric load schedule of the unified power system, and also indicated the possibility of creating an energy hub on the basis of a mini-thermal power plant, structured for the integration of energy sub-sectors, distributed generation sources and the option of generating “green” energy carriers.В рамках обеспечения энергетической безопасности страны и проведения политики декарбонизации экономики в Республике Беларусь предполагается максимальное использование собственных топливно-энергетических ресурсов (ТЭР). Однако открытым остается вопрос выбора вида теплоисточника в системах централизованного теплоснабжения при использовании местных видов топлива (МВТ). Ввод в эксплуатацию Белорусской АЭС и относительно высокая удельная стоимость электрогенерирующих мощностей на МВТ склоняют чашу весов к применению в качестве теплоисточников котельных. Исходя из мирового опыта развития и применения теплофикации как наиболее энергоэффективного решения в области теплоснабжения, исследована данная проблема в условиях Республики Беларусь. Показано, что электрическая мощность мини-ТЭЦ на традиционных МВТ, подключенных к объединенной системе страны, составляет менее 100 МВт, а основными технологиями, реализованными на мини-ТЭЦ на МВТ в Республике Беларусь, являются традиционные ПСУ с водяным паром в качестве рабочего тела (11 электростанций) и ПСУ с органическим циклом Ренкина (ОРЦ) (3 электростанции). Географически мини-ТЭЦ, работающие на МВТ, расположены равномерно по всей территории Республики Беларусь. Определено число часов использования установленной мощности возобновляемых источников энергии Республики Беларусь. Явное преимущество имеют энергоисточники на органических отходах и биомассе (свыше 4000 ч/год) и на гидроресурсах (около 3500 ч/год), для которых показатель числа часов использования установленной мощности значительно выше, чем для установок солнечной и ветровой энергетики. Кроме того, генерирующие мощности на биомассе имеют наименьший коэффициент поставки электроэнергии в Объединенную энергетическую систему Беларуси. На основе анализа современных тенденций развития энергетики сформулированы технико-экономические «факторы привлекательности» строительства теплофикационных систем теплоснабжения на МВТ в условиях Беларуси, к которым, помимо традиционных факторов (замещение импортируемого топлива – природного газа и нефти), относятся повышение качества и надежности энергообеспечения потребителей в удаленных точках, развитие полигенерации, снижение потерь электрической энергии на ее транспорт, участие в покрытии электрического графика нагрузок объединенной энергосистемы, а также указана возможность создания на базе мини-ТЭЦ энергетического хаба, структурированного под интеграцию энергетических подотраслей, источников распределенной генерации и опцию генерации «зеленых» энергоносителей
О целесообразности строительства мини-ТЭЦ на местных видах топлива в условиях Республики Беларусь. Часть 1. Состояние использования местных видов топлива в системах теплоснабжения
As part of ensuring the country's energy security and pursuing a policy of decarbonization of the economy in the Republic of Belarus, the maximum use of its own fuel and energy resources (FER) is expected. However, the question of choosing the type of heat source in centralized heat supply systems when using local fuels (LF) remains open. The commissioning of the Belarusian Nuclear Power Plant and the relatively high specific cost of electricity generating capacities using local fuels tip the scales to the use of boiler houses as heat sources. However, world experience in the development and application of heating, as the most energy-efficient solution in the field of heat supply, requires a more thorough study of this problem. The paper presents an overview of the use of local fuels in Belarus and a number of European countries with developed centralized heat supply. Based on the analysis of open source data, the paper provides information on the state of use of local fuels in district heating systems of the Republic of Belarus and a number of European countries that have experience in the widespread use of solid biomass and where it constitutes a significant share in the structure of thermal and electrical energy production in relation to other fuel and energy resources. The main aspects of the energy programs of a number of European countries with the largest share of thermal and electrical energy generation using local fuels are presented. It has been revealed that the energy program of Finland is of the greatest interest for Belarus, where the share of nuclear energy in the structure of electrical energy production, just like in the Republic of Belarus, is approaching to 40 % and the energy strategy assumes an increase in the share of thermal power plants using local fuels in the structure of heat and electricity generation.В рамках обеспечения энергетической безопасности страны и проведения политики декарбонизации экономики в Республике Беларусь предполагается максимальное использование собственных топливно-энергетических ресурсов (ТЭР). Однако открытым остается вопрос выбора вида теплоисточника в системах централизованного теплоснабжения при использовании местных видов топлива (МВТ). Ввод в эксплуатацию Белорусской АЭС и относительно высокая удельная стоимость электрогенерирующих мощностей на МВТ склоняет чашу весов к применению в качестве теплоисточников котельных. Однако мировой опыт развития и применения теплофикации, как наиболее энергоэффективного решения в области теплоснабжения, требует более тщательного исследования данной проблемы. В статье представлен обзор по применению МВТ в Беларуси и ряде европейских стран с развитым централизованным теплоснабжением, а также на основе анализа данных открытых источников представлена информация по состоянию применения МВТ в системах централизованного теплоснабжения Республики Беларусь и ряда европейских стран, имеющих опыт в широком использовании твердой биомассы и где она составляет существенную долю в структуре выработки тепловой и электрической энергии по отношению к другим ТЭР. Приведены основные аспекты энергетических программ ряда европейских стран с наибольшей долей выработки тепловой и электрической энергии на МВТ. Выявлено, что наибольший интерес для Беларуси представляет энергетическая программа Финляндии, где доля атомной энергии в структуре выработки электрической энергии так же, как и в Республике Беларусь, приближается к 40 % и энергетическая стратегия предполагает увеличение доли ТЭЦ на МВТ в структуре выработки тепловой и электрической энергии
Синтез новых производных арилкарбоновых кислот, содержащих гетероциклические заместители
The method for preparation of new substituted arylcarboxylic acids containing the amino function, that are the key precursors for new functionally substituted amides, has been described.Путем прямого восстановительного алкилирования 2-ариламинопиримидинов и первичных ароматических (гетероароматических) аминов осуществлен синтез новых замещенных арилкарбоновых кислот, содержащих в молекуле аминную функциональность, которые являются ключевыми синтетическими предшественниками новых функционализированных амидов
- …