538 research outputs found
Conformal Mapping on Rough Boundaries II: Applications to bi-harmonic problems
We use a conformal mapping method introduced in a companion paper to study
the properties of bi-harmonic fields in the vicinity of rough boundaries. We
focus our analysis on two different situations where such bi-harmonic problems
are encountered: a Stokes flow near a rough wall and the stress distribution on
the rough interface of a material in uni-axial tension. We perform a complete
numerical solution of these two-dimensional problems for any univalued rough
surfaces. We present results for sinusoidal and self-affine surface whose slope
can locally reach 2.5. Beyond the numerical solution we present perturbative
solutions of these problems. We show in particular that at first order in
roughness amplitude, the surface stress of a material in uni-axial tension can
be directly obtained from the Hilbert transform of the local slope. In case of
self-affine surfaces, we show that the stress distribution presents, for large
stresses, a power law tail whose exponent continuously depends on the roughness
amplitude
Fundamental Properties of Salts
Thermal properties of molten salt systems are of interest to electrorefining operations, pertaining to both the Fuel Cycle Research & Development Program (FCR&D) and Spent Fuel Treatment Mission, currently being pursued by the Department of Energy (DOE). The phase stability of molten salts in an electrorefiner may be adversely impacted by the build-up of fission products in the electrolyte. Potential situations that need to be avoided, during electrorefining operations, include (i) fissile elements build up in the salt that might approach the criticality limits specified for the vessel, (ii) electrolyte freezing at the operating temperature of the electrorefiner due to changes in the liquidus temperature, and (iii) phase separation (non-homogenous solution). The stability (and homogeneity) of the phases can be monitored by studying the thermal characteristics of the molten salts as a function of impurity concentration. Simulated salt compositions consisting of the selected rare earth and alkaline earth chlorides, with a eutectic mixture of LiCl-KCl as the carrier electrolyte, were studied to determine the melting points (thermal characteristics) using a Differential Scanning Calorimeter (DSC). The experimental data were used to model the liquidus temperature. On the basis of the this data, it became possible to predict a spent fuel treatment processing scenario under which electrorefining could no longer be performed as a result of increasing liquidus temperatures of the electrolyte
Thermal Analysis of Surrogate Simulated Molten Salts with Metal Chloride Impurities for Electrorefining Used Nuclear Fuel
This project is a fundamental study to measure thermal properties (liquidus, solidus, phase transformation, and enthalpy) of molten salt systems of interest to electrorefining operations, which are used in both the fuel cycle research & development mission and the spent fuel treatment mission of the Department of Energy. During electrorefining operations the electrolyte accumulates elements more active than uranium (transuranics, fission products and bond sodium). The accumulation needs to be closely monitored because the thermal properties of the electrolyte will change as the concentration of the impurities increases. During electrorefining (processing techniques used at the Idaho National Laboratory to separate uranium from spent nuclear fuel) it is important for the electrolyte to remain in a homogeneous liquid phase for operational safeguard and criticality reasons. The phase stability of molten salts in an electrorefiner may be adversely affected by the buildup of fission products in the electrolyte. Potential situations that need to be avoided are: (i) build up of fissile elements in the salt approaching the criticality limits specified for the vessel (ii) freezing of the salts due to change in the liquidus temperature and (iii) phase separation (non-homogenous solution) of elements. The stability (and homogeneity) of the phases can potentially be monitored through the thermal characterization of the salts, which can be a function of impurity concentration. This work describes the experimental results of typical salts compositions, consisting of chlorides of strontium, samarium, praseodymium, lanthanum, barium, cerium, cesium, neodymium, sodium and gadolinium (as a surrogate for both uranium and plutonium), used in the processing of used nuclear fuels. Differential scanning calorimetry was used to analyze numerous salt samples providing results on the thermal properties. The property of most interest to pyroprocessing is the liquidus temperature. It was previously known the liquidus temperature of the molten salt would change as spent fuel is processed through the Mk-IV electrorefiner. However, the extent of the increase in liquidus temperature was not known. This work is first of its kind in determining thermodynamic properties of a molten salt electrolyte containing transuranics, fission products and bond sodium. Experimental data concluded that the melting temperature of the electrolyte will become greater than the operating temperature of the Mk-IV ER during current fuel processing campaigns. Collected data also helps predict when the molten salt electrolyte will no longer be able to support electrorefining operations
New techniques for imaging and analyzing lung tissue.
The recent technological revolution in the field of imaging techniques has provided pathologists and toxicologists with an expanding repertoire of analytical techniques for studying the interaction between the lung and the various exogenous materials to which it is exposed. Analytical problems requiring elemental sensitivity or specificity beyond the range of that offered by conventional scanning electron microscopy and energy dispersive X-ray analysis are particularly appropriate for the application of these newer techniques. Electron energy loss spectrometry, Auger electron spectroscopy, secondary ion mass spectrometry, and laser microprobe mass analysis each offer unique advantages in this regard, but also possess their own limitations and disadvantages. Diffraction techniques provide crystalline structural information available through no other means. Bulk chemical techniques provide useful cross-checks on the data obtained by microanalytical approaches. It is the purpose of this review to summarize the methodology of these techniques, acknowledge situations in which they have been used in addressing problems in pulmonary toxicology, and comment on the relative advantages and disadvantages of each approach. It is necessary for an investigator to weigh each of these factors when deciding which technique is best suited for any given analytical problem; often it is useful to employ a combination of two or more of the techniques discussed. It is anticipated that there will be increasing utilization of these technologies for problems in pulmonary toxicology in the decades to come
Отвод и постановка на кадастровый учет земельного участка Воронинского кладбища, с. Воронино Томской области
Отвод и постановка на кадастровый учет земельного участка Воронинского кладбища, с. Воронино Томской области.Elimination and cadastral registration of the land plot of the Voronin cemetery, p. Voronino, Tomsk Region
Conformal Mapping on Rough Boundaries I: Applications to harmonic problems
The aim of this study is to analyze the properties of harmonic fields in the
vicinity of rough boundaries where either a constant potential or a zero flux
is imposed, while a constant field is prescribed at an infinite distance from
this boundary. We introduce a conformal mapping technique that is tailored to
this problem in two dimensions. An efficient algorithm is introduced to compute
the conformal map for arbitrarily chosen boundaries. Harmonic fields can then
simply be read from the conformal map. We discuss applications to "equivalent"
smooth interfaces. We study the correlations between the topography and the
field at the surface. Finally we apply the conformal map to the computation of
inhomogeneous harmonic fields such as the derivation of Green function for
localized flux on the surface of a rough boundary
- …