1,701 research outputs found
Destruction of superconductivity in disordered materials : a dimensional crossover
The disorder-induced Superconductor-to-Insulator Transition in amorphous
NbSi two-dimensional thin films is studied for different niobium
compositions through a variation of the sample thickness . We show that
the critical thickness , separating a superconducting regime from an
insulating one, increases strongly with diminishing , thus attaining values
of over 100 {\AA}. The corresponding phase diagram in the plane is
inferred and related to the three-dimensional situation. The two-dimensional
Superconductor-to-Insulator Transition well connects with the three-dimensional
Superconductor-to-Metal Transition
La Formation de Jupille, nouvelle formation dans le Dévonien inférieur de la Haute-Ardenne (Belgique)
The Jupille Formation, new formation in the lower Devonian of the High-Ardenne (Belgium). A new formation named Jupille is proposed to better characterize in the High-Ardenne area the rocks interbedded between the La Roche (or Villé if La Roche is missing) and PÚrnelle Formations, at the transition between the Pragian/Emsian stages (Lower Devonian). This formation is made up of series of grey, blue grey or greenish grey sandstone layers interbedded in blue grey siltstones and slates similar to those of the La Roche Formation. Locally, the sandstones grades to quartzites. Tool marks, current ripples, lenticular and oblique or hummocky cross-stratifications and load casts (pseudonodules) are present in the sandstone layers
Effect of annealing on the superconducting properties of a-Nb(x)Si(1-x) thin films
a-Nb(x)Si(1-x) thin films with thicknesses down to 25 {\AA} have been
structurally characterized by TEM (Transmission Electron Microscopy)
measurements. As-deposited or annealed films are shown to be continuous and
homogeneous in composition and thickness, up to an annealing temperature of
500{\deg}C. We have carried out low temperature transport measurements on these
films close to the superconductor-to-insulator transition (SIT), and shown a
qualitative difference between the effect of annealing or composition, and a
reduction of the film thickness on the superconducting properties of a-NbSi.
These results question the pertinence of the sheet resistance R_square as the
relevant parameter to describe the SIT.Comment: 9 pages, 12 figure
Magnetic field-induced quantum superconductor-insulator transition in
A study of magnetic-field tuned superconductor-insulator transitions in
amorphous thin films shows that quantum
superconductor-insulator transitions are characterized by an unambiguous
signature -- a kink in the temperature profile of the critical magnetic field.
Using this criterion, we show that the nature of the magnetic-field tuned
superconductor-insulator transition depends on the orientation of the field
with respect to the film. For perpendicular magnetic field, the transition is
controlled by quantum fluctuations with indications for the existence of a Bose
insulator; while for parallel magnetic field, the transition is classical,
driven by the breaking of Cooper pairs at the temperature dependent critical
field .Comment: 5 pages, 4 figure
A length scale for the superconducting Nernst signal above T in NbSi
We present a study of the Nernst effect in amorphous superconducting thin
films of NbSi. The field dependence of the Nernst coefficient
above T displays two distinct regimes separated by a field scale set by
the Ginzburg-Landau correlation length. A single function , with the
correlation length as its unique argument set either by the zero-field
correlation length (in the low magnetic field limit) or by the magnetic length
(in the opposite limit), describes the Nernst coefficient. We conclude that the
Nernst signal observed on a wide temperature () and field () range is exclusively generated by short-lived Cooper pairs.Comment: 4 pages, 4 figure
Gaze-contingent flicker pupil perimetry detects scotomas in patients with cerebral visual impairments or glaucoma
The pupillary light reflex is weaker for stimuli presented inside as compared to outside absolute scotomas. Pupillograph perimetry could thus be an objective measure of impaired visual processing. However, the diagnostic accuracy in detecting scotomas has remained unclear. We quantitatively investigated the accuracy of a novel form of pupil perimetry. The new perimetry method, termed gaze-contingent flicker pupil perimetry, consists of the repetitive on, and off flickering of a bright disk (2 hz; 320 cd/m; 4° diameter) on a gray background (160 cd/m) for 4 seconds per stimulus location. The disk evokes continuous pupil oscillations at the same rate as its flicker frequency, and the oscillatory power of the pupil reflects visual sensitivity. We monocularly presented the disk at a total of 80 locations in the central visual field (max. 15°). The location of the flickering disk moved along with gaze to reduce confounds of eye movements (gaze-contingent paradigm). The test lasted ~5 min per eye and was performed on 7 patients with cerebral visual impairment (CVI), 8 patients with primary open angle glaucoma (age >45), and 14 healthy, age/gender-matched controls. For all patients, pupil oscillation power (FFT based response amplitude to flicker) was significantly weaker when the flickering disk was presented in the impaired as compared to the intact visual field (CVI: 12%, AUC = 0.73; glaucoma: 9%, AUC = 0.63). Differences in power values between impaired and intact visual fields of patients were larger than differences in power values at corresponding locations in the visual fields of the healthy control group (CVI: AUC = 0.95; glaucoma: AUC = 0.87). Pupil sensitivity maps highlighted large field scotomas and indicated the type of visual field defect (VFD) as initially diagnosed with standard automated perimetry (SAP) fairly accurately in CVI patients but less accurately in glaucoma patients. We provide the first quantitative and objective evidence of flicker pupil perimetry's potential in detecting CVI-and glaucoma-induced VFDs. Gaze-contingent flicker pupil perimetry is a useful form of objective perimetry and results suggest it can be used to assess large VFDs with young CVI patients whom are unable to perform SAP
Tunable Superconducting Properties of a-NbSi Thin Films and Application to Detection in Astrophysics
We report on the superconducting properties of amorphous NbxSi1-x thin films.
The normal-state resistance and critical temperatures can be separately
adjusted to suit the desired application. Notably, the relatively low
electron-phonon coupling of these films makes them good candidates for an "all
electron bolometer" for Cosmological Microwave Background radiation detection.
Moreover, this device can be made to suit both high and low impedance readouts
MicrofaciĂšs dâune lentille biohermale a la limite Eifelien/Givetien (âFondry Des Chiensâ, Nismes, bord sud du synclinorium de Dinant)
Microfacies of a biohermal lens at the Eifelian.Givetian transition (âFondry des Chiensâ, Nismes, southern border of the Dinant Synclinorium). The biohermal lens of the âFondry des Chiensâ belongs to the Eifelian-Givetian transition beds near Nismes (southern flank of the Dinant basin). The lens is 64 m thick and composed of a stromatopore-coral framestone. It is overlain by restricted lagoonal algal and cyanophycean facies near the emersion, and overlies Udoteacean and coral-bryozoan coverstones forming the flanks of two other unexposed lenses. Two crinoidal soles stabilized by syntaxial cementation constitute the substratum of these lenses. The reefal sedimentation is regressive. The log is based on the succession of 10 carbonate microfacies (MF1-10, standard sequence). The deepest microfacies (MF1) is open marine at the upper limit of the storm waves and the dysphotic-euphotic boundary. The shallowest sediments were partly emerged (lagoonal sediments, MF10). The exposed reefal lens (rudstones and framestones, MF6-7) and the flanks (grainstones, floatstones and coverstones, MF3-4-5) of the two other lenses are preserved due to early isopachous intergranular cement in the original cavities of the framestones or âintramicriticâ (replacement of the matrix) cementation in the floatstones and coverstones. The similarity of the facies and their algal content suggest that the sedimentary model proposed at Wellin is applicable at Nismes. Sequential analysis points to a three steps regressive evolution of the sedimentation probably related to a discontinuous subidence. The sequences have similar thicknesses (sixty or so meters) and grade from the dysphotic-euphotic boundary estimated here around twenty meters deep to emersion. As for Wellin, the subsidence is thus much more important than the eustatic regression
AMORPHOUS PD-SI ALLOYS AND HYDRIDES PREPARED BY LOW-TEMPERATURE ION-IMPLANTATION
Ion implantation simultaneously produces compositional changes and radiation damage in the target. If the latter is not annealed, amorphization should ultimately result. Can implantation of a covalent solute into a transition metal host stabilize the damage and hence produce an amorphous alloy at lower concentrations than other techniques ? We have studied the composition-dependence of the resistivity and TCR of thin (600-800 Ă
) Pd films implanted at 6 K with Si ions : The results are compared to those obtained on the corresponding well-documented quench-condensed alloys, which are amorphous at Si concentrations ~.18. The resistivity of the implanted films saturates at about 90 ”Ω·cm for Si concentrations above ~.18. Thus, the critical concentration for amorphization is presumably the same for the low-temperature implanted or quench-condensed Pd-Si alloy, confirming that local structure effects dominate amorphous alloy formation criteria. In a further experiment, hydrogen was implanted into the amorphous Pd-Si films (again at 6K). The resistivity increased sharply, doubling at H concentrations around 100 %. The resulting systems were superconducting ; their maximum critical temperature was 2.6 K
Niobium Silicon alloys for Kinetic Inductance Detectors
We are studying the properties of Niobium Silicon amorphous alloys as a
candidate material for the fabrication of highly sensitive Kinetic Inductance
Detectors (KID), optimized for very low optical loads. As in the case of other
composite materials, the NbSi properties can be changed by varying the relative
amounts of its components. Using a NbSi film with T_c around 1 K we have been
able to obtain the first NbSi resonators, observe an optical response and
acquire a spectrum in the band 50 to 300 GHz. The data taken show that this
material has very high kinetic inductance and normal state surface resistivity.
These properties are ideal for the development of KID. More measurements are
planned to further characterize the NbSi alloy and fully investigate its
potential.Comment: Accepted for publication on Journal of Low Temperature Physics.
Proceedings of the LTD15 conference (Caltech 2013
- âŠ