4 research outputs found
Extracting Concrete Thermal Characteristics from Temperature Time History of RC Column Exposed to Standard Fire
A numerical method to identify thermal conductivity from time history of one-dimensional temperature variations in thermal unsteady-state is proposed. The numerical method considers the change of specific heat and thermal conductivity with respect to temperature. Fire test of reinforced concrete (RC) columns was conducted using a standard fire to obtain time history of temperature variations in the column section. A thermal equilibrium model in unsteady-state condition was developed. The thermal conductivity of concrete was then determined by optimizing the numerical solution of the model to meet the observed time history of temperature variations. The determined thermal conductivity with respect to temperature was then verified against standard thermal conductivity measurements of concrete bricks. It is concluded that the proposed method can be used to conservatively estimate thermal conductivity of concrete for design purpose. Finally, the thermal radiation properties of concrete for the RC column were estimated from the thermal equilibrium at the surface of the column. The radiant heat transfer ratio of concrete representing absorptivity to emissivity ratio of concrete during fire was evaluated and is suggested as a concrete criterion that can be used in fire safety assessment
Effect of Surrogate Aggregates on the Thermal Conductivity of Concrete at Ambient and Elevated Temperatures
The accurate assessment of the thermal conductivity of concretes is an important part of building design in terms of thermal efficiency and thermal performance of materials at various temperatures. We present an experimental assessment of the thermal conductivity of five thermally insulated concrete specimens made using lightweight aggregates and glass bubbles in place of normal aggregates. Four different measurement methods are used to assess the reliability of the thermal data and to evaluate the effects of the various sensor types. The concrete specimens are also assessed at every 100°C during heating to ~800°C. Normal concrete is shown to have a thermal conductivity of ~2.25 W m−1 K−1. The surrogate aggregates effectively reduce the conductivity to ~1.25 W m−1 K−1 at room temperature. The aggregate size is shown not to affect thermal conduction: fine and coarse aggregates each lead to similar results. Surface contact methods of assessment tend to underestimate thermal conductivity, presumably owing to high thermal resistance between the transducers and the specimens. Thermogravimetric analysis shows that the stages of mass loss of the cement paste correspond to the evolution of thermal conductivity upon heating
Experimental Evaluation of Thermal Performance and Durability of Thermally-Enhanced Concretes
The thermal performance and durability of the thermally-enhanced concrete with various insulating materials were evaluated through a series of tests. Three types of insulating materials—diatomite powder, hollow micro-spheres, and a micro-foam agent—were used for both normalweight aggregate concrete (NWAC) and lightweight aggregate concrete (LWAC). The thermal conductivity was measured by two different test methods: quick thermal conductivity meter (QTM) and guarded hot wire (GHW) methods. Then, the results were compared with each other. All insulating materials used in this study proved their ability to reduce the thermal conductivity. Additionally, it can be found that the trend of a decrease in air-dry density is similar to that of thermal conductivity of thermally-enhanced concrete. Additional thermal transmission tests with seven large-scale specimens were conducted by using the calibrated hot box (CHB). However, from this tests, it was seen that thermal transmission reduction for tested specimens were not large compared to the thermal conductivity reduction measured by QTM and GHW, due to multiple heat transfer. To examine the durability of thermally-enhanced concretes, accelerated carbonation and freeze-thaw cycle tests were conducted. From the results, it can be found that the thermally-enhanced concrete shows good freeze-thaw resistance. However, the carbonation rates of the concretes increased rapidly and additional methods to improve the carbonation resistance should be considered
Investigation of Pozzolanic Reaction in Nanosilica-Cement Blended Pastes Based on Solid-State Kinetic Models and 29Si MAS NMR
The incorporation of pozzolanic materials in concrete has many beneficial effects to enhance the mechanical properties of concrete. The calcium silicate hydrates in cement matrix of concrete increase by pozzolanic reaction of silicates and calcium hydroxide. The fine pozzolanic particles fill spaces between clinker grains, thereby resulting in a denser cement matrix and interfacial transition zone between cement matrix and aggregates; this lowers the permeability and increases the compressive strength of concrete. In this study, Ordinary Portland Cement (OPC) was mixed with 1% and 3% nanosilica by weight to produce cement pastes with water to binder ratio (w/b) of 0.45. The specimens were cured for 7 days. 29Si nuclear magnetic resonance (NMR) experiments are conducted and conversion fraction of nanosilica is extracted. The results are compared with a solid-state kinetic model. It seems that pozzolanic reaction of nanosilica depends on the concentration of calcium hydroxide