Optimising biocatalyst design for obtaining high transesterification activity by alpha-chymotrypsin in non-aqueous media.

RIGHTS : This article is licensed under the BioMed Central licence at http://www.biomedcentral.com/about/license which is similar to the 'Creative Commons Attribution Licence'. In brief you may : copy, distribute, and display the work; make derivative works; or make commercial use of the work - under the following conditions: the original author must be given credit; for any reuse or distribution, it must be made clear to others what the license terms of this work are.BACKGROUND: Enzymes are often used in organic solvents for catalyzing organic synthesis. Two enzyme preparations, EPRP (enzyme precipitated and rinsed with n-propanol) and PCMC (protein coated microcrystals) show much higher activities than lyophilized powders in such systems. Both preparations involve precipitation by an organic solvent. The clear understanding of why these preparations show higher catalytic activity than lyophilized powders in organic solvents is not available. RESULTS: It was found that EPRPs of alpha-chymotrypsin prepared by precipitation with n-propanol in the presence of trehalose contained substantial amount of trehalose (even though trehalose alone at these lower concentrations was not precipitated by n-propanol). The presence of trehalose in these EPRPs resulted in much higher transesterification rates (45.2 nmoles mg(-1) min(-1)) as compared with EPRPs prepared in the absence of trehalose (16.6 nmoles mg(-1) min(-1)) in octane. Both kinds of EPRPs gave similar initial transesterification rates in acetonitrile. Use of higher concentrations of trehalose (when trehalose alone also precipitates out), resulted in the formation of PCMCs, which showed higher transesterification rates in both octane and acetonitrile. SEM analysis showed the relative sizes of various preparations. Presence of trehalose resulted in EPRPs of smaller sizes. CONCLUSION: The two different forms of enzymes (EPRP and PCMC) known to show higher activity in organic solvents were found to be different only in the way the low molecular weight additive was present along with the protein. Therefore, the enhancement in the transesterification activity in EPRPs prepared in the presence of trehalose was due to: (a) better retention of essential water layer for catalysis due to the presence of the sugar. This effect disappeared where the reaction media was polar as the polar solvent (acetonitrile) is more effective in stripping off the water from the enzyme; (b) reduction in particle size as revealed by SEM. In the case of PCMC, the enhancement in the initial rates was due to an increase in the surface area of the biocatalyst since protein is coated over the core material (trehalose or salt).It is hoped that the insight gained in this work would help in a better understanding for designing high activity biocatalyst preparation of non-aqueous media.Published versio

Optimising biocatalyst design for obtaining high transesterification activity by α-chymotrypsin in non-aqueous media

<p>Abstract</p> <p>Background</p> <p>Enzymes are often used in organic solvents for catalyzing organic synthesis. Two enzyme preparations, EPRP (enzyme precipitated and rinsed with n-propanol) and PCMC (protein coated microcrystals) show much higher activities than lyophilized powders in such systems. Both preparations involve precipitation by an organic solvent. The clear understanding of why these preparations show higher catalytic activity than lyophilized powders in organic solvents is not available.</p> <p>Results</p> <p>It was found that EPRPs of α-chymotrypsin prepared by precipitation with <it>n</it>-propanol in the presence of trehalose contained substantial amount of trehalose (even though trehalose alone at these lower concentrations was not precipitated by <it>n</it>-propanol). The presence of trehalose in these EPRPs resulted in much higher transesterification rates (45.2 nmoles mg^-1min^-1) as compared with EPRPs prepared in the absence of trehalose (16.6 nmoles mg^-1min^-1) in octane. Both kinds of EPRPs gave similar initial transesterification rates in acetonitrile. Use of higher concentrations of trehalose (when trehalose alone also precipitates out), resulted in the formation of PCMCs, which showed higher transesterification rates in both octane and acetonitrile. SEM analysis showed the relative sizes of various preparations. Presence of trehalose resulted in EPRPs of smaller sizes.</p> <p>Conclusion</p> <p>The two different forms of enzymes (EPRP and PCMC) known to show higher activity in organic solvents were found to be different only in the way the low molecular weight additive was present along with the protein. Therefore, the enhancement in the transesterification activity in EPRPs prepared in the presence of trehalose was due to: (a) better retention of essential water layer for catalysis due to the presence of the sugar. This effect disappeared where the reaction media was polar as the polar solvent (acetonitrile) is more effective in stripping off the water from the enzyme; (b) reduction in particle size as revealed by SEM. In the case of PCMC, the enhancement in the initial rates was due to an increase in the surface area of the biocatalyst since protein is coated over the core material (trehalose or salt).</p> <p>It is hoped that the insight gained in this work would help in a better understanding for designing high activity biocatalyst preparation of non-aqueous media.</p

Enhancement of lipase activity in non-aqueous media upon immobilization on multi-walled carbon nanotubes

<p>Abstract</p> <p>Background</p> <p>Immobilization of biologically active proteins on nanosized surfaces is a key process in bionanofabrication. Carbon nanotubes with their high surface areas, as well as useful electronic, thermal and mechanical properties, constitute important building blocks in the fabrication of novel functional materials.</p> <p>Results</p> <p>Lipases from <it>Candida rugosa </it>(CRL) were found to be adsorbed on the multiwalled carbon nanotubes with very high retention of their biological activity (97%). The immobilized biocatalyst showed 2.2- and 14-fold increases in the initial rates of transesterification activity in nearly anhydrous hexane and water immiscible ionic liquid [Bmim] [PF6] respectively, as compared to the lyophilized powdered enzyme. It is presumed that the interaction with the hydrophobic surface of the nanotubes resulted in conformational changes leading to the 'open lid' structure of CRL. The immobilized enzyme was found to give 64% conversion over 24 h (as opposed to 14% with free enzyme) in the formation of butylbutyrate in nearly anhydrous hexane. Similarly, with ionic liquid [Bmim] [PF6], the immobilized enzyme allowed 71% conversion as compared to 16% with the free enzyme. The immobilized lipase also showed high enantioselectivity as determined by kinetic resolution of (±) 1-phenylethanol in [Bmim] [PF6]. While free CRL gave only 5% conversion after 36 h, the immobilized enzyme resulted in 37% conversion with > 99% enantiomeric excess. TEM studies on the immobilized biocatalyst showed that the enzyme is attached to the multiwalled nanotubes.</p> <p>Conclusion</p> <p>Successful immobilization of enzymes on nanosized carriers could pave the way for reduced reactor volumes required for biotransformations, as well as having a use in the construction of miniaturized biosensensor devices.</p

Examining structure-activity correlations of some high activity enzyme preparations for low water media

A first study of the comparison of structures of enzymes (by FT-IR and CD) in different high activity (in low water media) preparations is reported. Using chymotrypsin and subtilisin as models, we have studied various factors that distinguish enzyme precipitated and rinsed with propanol (EPRP), crosslinked enzyme aggregates (CLEA), protein coated microcrystals (PCMC) and crosslinked protein coated microcrystals (CLPCMC). The suspensions in organic media were assayed for catalytic activity, and structures were probed by FT-IR and CD measurements. CD studies of enzyme suspensions were possible by using a rotating cell accessory. There was a generally good correlation between higher catalytic activity and retention of native structures. Activity and retention of native structure was always higher if aqueous enzyme solution was added to propanol rather than vice versa in the precipitation step of these preparations. The work identifies factors which may lead to better biocatalyst designs for low water media

Insertion of a Calcium-Responsive β‑Roll Domain into a Thermostable Alcohol Dehydrogenase Enables Tunable Control over Cofactor Selectivity

The RTX domains found in some secreted proteins fold into the β-roll secondary structure motif upon calcium binding, which enables folding to be localized extracellularly. We inserted an RTX domain from the adenylate cyclase of Bordetella pertussis into a loop near the catalytic active site of the thermostable alcohol dehydrogenase D (AdhD) from Pyrococcus furiosus. The resultant chimera, β-AdhD, gained the calcium-binding ability of the β-roll, retained the thermostable activity of AdhD, and exhibited reduced overall alcohol dehydrogenase activity. However, the addition of calcium to β-AdhD preferentially inhibited NAD⁺-dependent activity in comparison to NADP⁺-dependent activity. Calcium was found to be a competitive inhibitor of AdhD, and the addition of the RTX domain introduced calcium-dependent noncompetitive inhibition to β-AdhD affecting NAD⁺-dependent activity. Thus, the insertion of an intrinsically disordered calcium-binding domain into a key loop in a cofactor-dependent enzyme results in an enzyme with tunable cofactor selectivity, reminiscent of a calcium-controlled cofactor selectivity rheostat switch

Facile fabrication of antibacterial and antiviral perhydrolase-polydopamine composite coatings

Abstract In situ generation of antibacterial and antiviral agents by harnessing the catalytic activity of enzymes on surfaces provides an effective eco-friendly approach for disinfection. The perhydrolase (AcT) from Mycobacterium smegmatis catalyzes the perhydrolysis of acetate esters to generate the potent disinfectant, peracetic acid (PAA). In the presence of AcT and its two substrates, propylene glycol diacetate and H2O2, sufficient and continuous PAA is generated over an extended time to kill a wide range of bacteria with the enzyme dissolved in aqueous buffer. For extended self-disinfection, however, active and stable AcT bound onto or incorporated into a surface coating is necessary. In the current study, an active, stable and reusable AcT-based coating was developed by incorporating AcT into a polydopamine (PDA) matrix in a single step, thereby forming a biocatalytic composite onto a variety of surfaces. The resulting AcT-PDA composite coatings on glass, metal and epoxy surfaces yielded up to 7-log reduction of Gram-positive and Gram-negative bacteria when in contact with the biocatalytic coating. This composite coating also possessed potent antiviral activity, and dramatically reduced the infectivity of a SARS-CoV-2 pseudovirus within minutes. The single-step approach enables rapid and facile fabrication of enzyme-based disinfectant composite coatings with high activity and stability, which enables reuse following surface washing. As a result, this enzyme-polymer composite technique may serve as a general strategy for preparing antibacterial and antiviral surfaces for applications in health care and common infrastructure safety, such as in schools, the workplace, transportation, etc