New chopper modulators using differential voltage current conveyor

This paper presents new chopper modulators which can enable to assign three modulators in one circuit. Full amplitude modulators as Cowan and Ring modulators are kinds of the amplitude modulators as well. The proposed circuit is implemented from the differential voltage current conveyor, four-MOS transistors switch and two-MOS transistors inverter. The advantage of this proposed circuit is high input and low output impedance and is able to be connected with any load without buffer and the number of transistors is quite less which is suitable for integrated circuits. The technique is to control the switch by using the square pulse which is obtained from a direct signal generator. All simulation results are based on the PSPICE program simulator which confirms the performance of the proposed circuit and technique

Voltage-Mode Multifunction Biquadratic Filters Using New Ultra-Low-Power Differential Difference Current Conveyors

This paper presents two low-power voltage-mode multifunction biquadratic filters using differential difference current conveyors. Each proposed circuit employs three differential difference current conveyors, two grounded capacitors and two grounded resistors. The low-voltage ultra-low-power differential difference current conveyor is used to provide low-power consumption of the proposed filters. By appropriately connecting the input and output terminals, the proposed filters can provide low-pass, band-pass, high-pass, band-stop and all-pass voltage responses at high-input terminals, which is a desirable feature for voltage-mode operations. The natural frequency and the quality factor can be orthogonally set by adjusting the circuit components. For realizing all the filter responses, no inverting-type input signal requirements as well as no component-matching conditional requirements are imposed. The incremental parameter sensitivities are also low. The characteristics of the proposed circuits are simulated by using PSPICE simulators to confirm the presented theory

ECCCII-Based Current-Mode Universal Filter with Orthogonal Control of w_o and Q

This paper presents a new current-mode current-controlled four-input five-output universal filter employing one current-controlled current conveyor (CCCII), one electronically tunable CCCII and two grounded capacitors. The proposed configuration provides lowpass, bandpass, highpass, bandstop and allpass current responses that taken from the high-output impedance terminals, which enable easy cascadability of the current-mode operation. The filter also offers both orthogonal and electronic controls of the natural frequency and the quality factor through adjusting the bias current of the CCCIIs. For realizing all the filter responses, the proposed filter does not require passive component-matching condition and both active and passive sensitivities are low. In addition, a new current-mode current-controlled single-input five-output universal filter can be achieved by using an additional multiple-output minus-type CCCII. The proposed filter is simulated using PSPICE simulations to confirm the theoretical analysis

Voltage-Controlled Floating Resistor Using DDCC

This paper presents a new simple configuration to realize the voltage-controlled floating resistor, which is suitable for integrated circuit implementation. The proposed resistor is composed of three main components: MOS transistor operating in the non-saturation region, DDCC, and MOS voltage divider. The MOS transistor operating in the non-saturation region is used to configure a floating linear resistor. The DDCC and the MOS transistor voltage divider are used for canceling the nonlinear component term of MOS transistor in the non-saturation region to obtain a linear current/voltage relationship. The DDCC is employed to provide a simple summer of the circuit. This circuit offers an ease for realizing the voltage divider circuit and the temperature effect that includes in term of threshold voltage can be compensated. The proposed configuration employs only 16 MOS transistors. The performances of the proposed circuit are simulated with PSPICE to confirm the presented theory

Mixed-Mode Third-Order Quadrature Oscillator Based on Single MCCFTA

This paper presents a new mixed-mode third-order quadrature oscillator based on new modified current-controlled current follower transconductance amplifier (MCCFTA). The proposed circuit employs one MCCFTA as active element and three grounded capacitors as passive component which is highly suitable for integrated circuit implementation. The condition and frequency of oscillations can be controlled orthogonally and electronically by adjusting the bias currents of the active device. The circuit provides four quadrature current outputs and two quadrature voltage outputs into one single topology, which can be classified as mixed-mode oscillator. In addition, four quadrature current output terminals possess high-impedance level which can be directly connected to next stage without additional buffer circuits. The performance of the proposed structure has been verified through PSPICE simulators using 0.25 µm CMOS process from TSMC and experimental results are also investigated