Genetic analysis of japonica x indica recombinant inbred lines and characterization of major fragrance gene by microsatellite markers

Traditional basmati rice varieties are very low yielding due to their tendency to lodging and increasing susceptibility to diseases. To improve the characters of basmati rice variety and study the inheritance of various physio-morphological and quality characters, F5 population comprising of 204 lines from the cross between NPT II (non-aromatic, japonica) and Taraori Basmati or HBC19 (aromatic, indica), were evaluated. Ample amount of genetic variability was observed for the characters plant height, tillers per plant, kernel length, kernel breath and L/B ratio. The grain yield/plant showed positive correlation with productive tiller/plant and test weight. Path coefficient analysis showed that the productive tiller/plant and test weight contribute to grain yield/ plant through direct effect. The parent off-spring regression was high for all the characters under study suggesting improvement of these characters by mere selection. Based on divergence study, 204 lines were categorized in seven clusters whereas parents were grouped in different clusters. Molecular restricted selection using specific SSR markers with depicting high correlation with aroma could offer great promise to select high yielding rice among high aroma lines. A total of 54 randomly selected F5 plants were subjected to SSR marker analysis using SSR markers. The F5 plants had an allele from either of the two parental lines (homozygous condition) or alleles from both the parental rice varieties (heterozygous condition). At some SSR loci, new/recombinant alleles were observed, which indicate the active recombination between genomes of two rice varieties and can be used for linkage mapping once complete homozygosity is achieved. SSR allelic profile based on two dimensional principal component analysis demonstrated high level of diversity among parents and F5 plants spread between them.Keywords: Oryza sativa L., basmati, microsatellite, phenotyping, rice, recombinant inbred lines (RILs)African Journal of Biotechnology Vol. 12(32), pp. 5022-502

Characteristic features of winter precipitation and its variability over northwest India

Northwestern parts of India receive considerable amount of precipitation during the winter months of December-March. Although, it is only about 15 of the annual precipitation, the precipitation is very important for rabi crops and to maintain the glaciers extend in the Himalaya, which melt and supply water to the rivers during other seasons. The precipitation is mainly associated with the sequence of synoptic systems known as 'western disturbances'. The precipitation has considerable spatial and temporal variability, with maximum precipitation occurring particularly over northern hilly regions, with decreasing influence southwards. The spatially coherent winter precipitation series has been prepared for the largest possible area comprising nine meteorological subdivisions of northwest India, which constitute about 32 of the total area of the country, having similar precipitation characteristics. The precipitation series has been statistically analysed to understand its characteristics and variability. The seasonal precipitation series is found to be homogeneous, Gaussian (normal) distributed and free from persistence. The precipitation variability has increased during the most recent three decades with more excess and deficient years

Altered expression of microRNA in the airway wall in chronic asthma: miR-126 as a potential therapeutic target

Background: The role of microRNAs (miRNAs) in regulating gene expression is currently an area of intense interest. Relatively little is known, however, about the role of miRNAs in inflammatory and immunologically-driven disorders. In a mouse model, we have previously shown that miRNAs are potentially important therapeutic targets in allergic asthma, because inhibition of miR-126, one of a small subset of miRNAs upregulated in the airway wall, effectively suppressed Th2-driven airway inflammation and other features of asthma. In the present study, we extended investigation of the therapeutic potential of miRNA inhibition to our well-established model of chronic asthma. Methods: Female BALB/c mice were systemically sensitised with ovalbumin (OVA) and chronically challenged with low mass concentrations of aerosolised OVA for up to 6 weeks. Airway tissue was obtained by blunt dissection and RNA was isolated for miRNA profiling. On the basis of the results obtained, animals were subsequently treated with either an antagomir to miR-126 (ant-miR-126) or a scrambled control antagomir once weekly during the 6 weeks of chronic challenge, and the effects on airway inflammation and remodelling were assessed using established morphometric techniques. Results: Compared to naïve mice, there was selective upregulation of a modest number of miRNAs, notably miR-126, in the airway wall tissue of chronically challenged animals. The relative increase was maximal after 2 weeks of inhalational challenge and subsequently declined to baseline levels. Compared to treatment with the scrambled control, ant-miR-126 significantly reduced recruitment of intraepithelial eosinophils, but had no effect on the chronic inflammatory response, or on changes of airway remodelling. Conclusions: In this model of chronic asthma, there was an initial increase in expression of a small number of miRNAs in the airway wall, notably miR-126. However, this later declined to baseline levels, suggesting that sustained changes in miRNA may not be essential for perpetuation of chronic asthma. Moreover, inhibition of miR-126 by administration of an antagomir suppressed eosinophil recruitment into the airways but had no effect on chronic inflammation in the airway wall, or on changes of remodelling, suggesting that multiple miRNAs are likely to regulate the development of these lesions

Operating Manifold Services in Hospitals: A costly affair?

Manifold services form an important cost centre in hospitals. Most public sector hospitals do not have standard cost accounting system and therefore budget allocation is often difficult for support services such as the manifold. The study was conducted in a 1045 bedded tertiary care hospital in New Delhi, India with the objective of identifying the cost incurred in delivery of manifold services.This traditional costing exercise was conducted from 01 July to 30 Sept 2010 and included classification of costs, identification of the cost centres in the hospital, cost allocation and apportioning. Direct and indirect costs as well as capital and operational costs were calculated. The process of manifold services from delivery to the operational aspects was studied. Tender documents and supply orders were perused to arrive at expenditure on manifold gas pipeline system, equipment & accessories. Total annual cost of manifold services at the hospital was calculated to be $333,676 and per day cost was calculated to be$ 941 .Annual cost per manifold terminal unit was $207.3. The daily cost of manifold system was calculated to be$ 0.56. The annual and daily cost per bed was deduced to be $320 and$ 0.87 respectively.While manifold is a vital support service, the fact remains that it is cost intensive and underutilized and often poorly planned in terms of cost effectiveness. The focus on technology in manifold services needs to be sustained

Sacrospinous ligament fixation for prevention and treatment of vaginal vault prolapse: a retrospective study of 45 cases

Background: To assess intraoperative and postoperative complications and to evaluate recurrence of vault prolapse in women who have undergone unilateral (left) Sacrospinous ligament fixation.Methods: Between January 2007 and January 2015, 45 women (mean age 56.5 years, range 35 to 78 years) underwent vaginal unilateral (left) Sacrospinous ligament fixation at Shree Dharmasthala Manjunatheshwara (SDM) College of Medical Sciences, Dharwad, India. 15 patients had prior hysterectomy. Concomitant hysterectomy and Sacrospinous ligament fixation was performed in 30 patients. Sacrospinous ligament fixation was combined with additional procedures like Trans-Obturator tape (TOT) insertion in 2 (4.6%) patients.Results: All patients were analyzed for intraoperative and postoperative complications. 1 patient had Urinary tract infection (n=1, 2.2%), 1 patient had haemorrhage requiring blood transfusion (n=1, 2.2%). The mean follow up was for 15 months (range 6 months to 24 months). 1 patient (2.2%) had asymptomatic recurrent cystocele and 1 patient (2.2%) had dyspareunia. No recurrence of vault prolapse was noted.Conclusions: Sacrospinous ligament fixation is a simple, effective and safe procedure for treatment and prevention of vault prolapse with least complications and recurrence rates.

Effects of powder characteristics and chemical composition on the properties of 25Cr7Ni stainless steel fabricated by laser-powder bed fusion and evaluation of process simulation

The 25Cr7Ni stainless steel alloy system is gaining increasing interest in the oil and gas industry because of its combination of high strength and corrosion resistance properties. However, very few studies on the effects of starting powder attributes and chemical composition on the as-printed properties of 25Cr7Ni stainless steel fabricated through laser-powder bed fusion (L-PBF) exist in the literature. This study examined the influence of powder attributes and chemical composition on the samples from gas atomized and water atomized 25Cr7Ni stainless steel powders, fabricated through L-PBF, on their as-printed microstructure and properties. The mechanical properties that were examined included ultimate tensile strength (UTS), elongation (%), and hardness. The corrosion behavior was also studied using linear sweep voltammetry in 3.5 wt.% NaCl solution. The evolved phases were characterized using optical and scanning electron microscopy, as well as through X-ray diffraction. The gas atomized powders, with their spherical and uniform morphology, yielded as-printed parts of higher relative densities when compared to water atomized powders, with irregular morphology due to better powder bed compaction. The higher densification obtained in the L-PBF samples from gas atomized powders translated into the highest UTS, hardness, and yield strength among the L-PBF samples from water atomized powders and wrought–annealed 25Cr7Ni stainless steel. The presence of higher amounts of N and Mn in the chemical composition of the gas atomized powders over water atomized powders promoted the presence of retained austenite in the corresponding L-PBF samples. Higher amounts of Mo, combined with austenite content, yielded a higher corrosion resistance in the L-PBF samples from the gas atomized powder than in the L-PBF samples from the water atomized powders. The latter part of the work is focused on the evaluation of simulation parameters for analyzing the fabrication procedure for the L-PBF process using Simufact software. For a given set of process parameters, Simufact provides the distortion and internal stresses developed in the printed parts as output. The present study sought to evaluate the process simulation by comparing the experimental observations in terms of the part distortion achieved in a stainless steel cube fabricated through L-PBF with Simufact process simulation obtained using the same set of process parameters

Relation of Stump Length with Various Gait Parameters in Trans-tibial Amputees

The purpose of this paper is evaluating the impact of stump length of unilateral below knee amputees (BKA) on different gait parameters. Nine unilateral BKA were chosen and divided into three groups comprising patients with short, medium, and long stump length. Each of them underwent gait analysis test by Computer Dynography (CDG) system to measure the gait parameters. It was found that the ground reaction force is higher in the patients with medium stump length whereas the velocity, step length both for the prosthetic and sound limb and cadence were high in longer stump length. Statistical analysis shows a significant difference (p<0.05) between the gait parameters of BKA with medium and longer stump length. The patients with longer stump length were more efficient than medium and short stump patients as they consumed comparatively lesser energy while walking with self-selected velocity and conventional (Solid ankle cushioned heel) SACH foot

Design and Evaluation of an Oral Floating Matrix Tablet of Salbutamol Sulphate

Purpose: To develop floating matrix tablets of salbutamol sulphate using ethyl cellulose and acrycoat S-100 as polymers, and sodium bicarbonate, citric acid and tartaric acid as gas generating agents. Methods: Twenty four formulations were prepared and segregated into four major categories, A to D. The floating tablets were prepared by wet granulation technique, and the granules were compressed at a pressure of 50 kg/cm2. The tablets contained drug, ethyl cellulose and Acrycoat S-100 (as releaseretarding polymers), sodium bicarbonate, citric acid and tartaric acid (as gas formers) as well as various additives. The tablets were made by wet granulation technique. The formulations were evaluated for in vitro buoyancy, dissolution and in vitro drug release. Results: All the formulations fulfilled the essential requirements for good floating systems. Formulation F8, containing citric acid and sodium bicarbonate, showed lower lag time and longer floating duration than the formulations containing only sodium bicarbonate. Formulation F8.2 (which contained citric and tartaric acid at a ratio of 1:1) showed longer floating duration (9 h) than F8. As the concentration of sodium bicarbonate increased in formulation F8.2, drug release decreased while floating duration increased.Conclusion: Of all the 24 formulations, the one containing tartaric acid and citric acid in ratio 1:3 and 12 mg sodium bicarbonate showed the highest floating duration and least lag time.Keywords: Salbutamol sulphate, Ethyl cellulose, Acrycoat S-100, Sodium bicarbonate, Citric acid, Tartaric aci