Papillary cystic acinic cell carcinoma: report of a rare lesion with unusual presentation

Introduction: Acinic cell carcinoma is an uncommon low grade tumour of the salivary glands that constitutes 2.5 to 4% of parotid gland tumours. Acinic cell carcinoma -Papillary cystic variant (ACC-PCV) is histologically composed of tumor with papillary and cystic growth patterns, with varying proportions of one or more cell types. It has been conferred significance because it has a poorer prognosis and is reported to be universally fatal in ten years. Case Report: We present a case of ACC-PCV in a sixteen year old male with unusual unicystic gross appearance, benign cytological picture and characteristic histopathological features .Cystic areas with papillary projection of surrounding cells showing characteristic tombstone or hobnail arrangements were seen. Discussion: The histogenesis and myriad architectural and cellular variations of ACC-PCV have been discussed along with its variegated cytomorphology which may lead to pitfalls in cytodiagnosis. The tumor may pose difficulty in histodiagnosis due to its resemblance to papillary carcinoma of the thyroi

SCIENTIFIC WRITING AS AN ART: AN OVERVIEW

Writing well is an art that takes time to be perfect, but if you don't try it, you won't nail it. The value of writing should never be underestimated, as writing well improves your work [1]. If the writing is clear, it can turn bad science into good science and makes more impactful and valuable [1]. Writing helps the speaker to express the issue before audience very easier. There are various types of writing such as articles, journals, literature review etc [3]. The scientific writing should be simple, objective and concise. Writing depends on the reader's needs (for a normal reader technical terms mathematical expressions has never suited well) [2]. Various types of manuscripts are used in scientific writing. One of the key developers in scientific publications is the adoption of the IMRAD's [Introduction, Methods, Results and Discussion] structure [5]. Apart from this other form is TAKAR (Title, Abstract, Keywords, Acknowledgements, and References) [5]. Approaches made by writers for in the design of the contents are about various forms in more than one journal [4]. In case of reference also various styles are used, such as Vancouver's style, the Harvard system. Writing is a most important factor to criticize and evaluate the publications [9]. Writing process should not intend to be sane, effective. Writing is a decision making process and Writers designs in different ways for their scientific work [7]. All written communications are affected by a larger context or situation [8]. This article helps the reviewers to know about the different writing methods its rhythm and styles

Oral mucosal diseases in anxiety and depression patients: Hospital based observational study from south India

Objectives: The objective of this study was to evaluate the prevalence of different Oral Mucosal diseases in Anxiety and Depression patients. Material and Methods: A hospital based observational Study was conducted in the department of Psychiatry and department of Oral Medicine and Radiology. Patients who were diagnosed with Anxiety or Depression by the psy - chiatrists using Hamilton Anxiety and Depression scale were subjected to complete oral examination to check for oral diseases like Oral Lichen Planus (OLP), Recurrent Aphthous Stomatitis (RAS), and Burning Mouth Syndrome (BMS). Equal number of control group subjects were also included. Results: In this study statistically significant increase in the oral diseases in patients with anxiety and depression than the control group was recorded. Oral diseases were significantly higher in anxiety patients (20.86%) than in depression (9.04%) and control group patients (5.17%). In anxiety patients, the prevalence of RAS was 12%, OLP was 5.7%, and BMS was 2.87%. In depression patients, the prevalence of RAS was 4.02%, OLP was 2.01% and BMS was 3.01%. In control group the prevalence was 2.2%, 1.33% and 1.62% in RAS, OLP and BMS respecti - vely. RAS and OLP were significantly higher in the younger age group (18-49) and BMS was seen between the age group of 50-77 years in both study and control groups. Conclusions: The results of the present study showed a positive association between psychological alterations and changes in the oral mucosa, particularly conditions like OLP, RAS and BMS. Thus psychogenic factors like anxiety and depression may act as a risk factor that could influence the initiation and development of oral mucosal diseases. Hence psychological management should be taken into consideration when treating patients with these oral diseases

A geotechnical perspective on soil-termite interaction: Role of termites in unsaturated soil properties

The soil-insect interaction has gathered significant attention in the recent years due to its contribution to bio-cementation. Termites, as a group of cellulose-eating insects, alter physical (texture) and chemical (chemical composition) properties of soil. Conversely, physico-chemical properties of soil also influence termite activities. It is vital to understand the soil-termite interaction and their influence on hydraulic properties and shear strength of soil, which are related to a series of geotechnical engineering problems such as ground water recharge, runoff, erosion and stability of slopes. In this study, an attempt has been made to review the latest developments and research gaps in our understanding of soil-termite interaction within the context of geo-environmental engineering. The hydraulic properties and shear strength of termite modified soil were discussed with respect to soil texture, density and physico-chemical composition. The incorporation of hysteresis effect of soil water characteristic curve, and spatio-temporal variations of hydraulic conductivity and shear strength of termite modified soil is proposed to be considered in geotechnical engineering design and construction. Finally, the challenges and future trends in this research area are presented. The expertise from both geotechnical engineering and entomology is needed to plan future research with an aim to promote use of termites as maintenance engineers in geotechnical infrastructure

Mitigating Phytophthora foot rot and slow decline diseases of black pepper through the deployment of bacterial antagonists

Field trial was conducted at ICAR-IISR Experimental Farm, Peruvannamuzhi, Kozhikode district, Kerala, during 2008-2013 using IPM modules. Planting materials of black pepper were produced by raising two node runners cuttings treated with chemicals and bioagents. A plot having non-living standards in 3 x 2 m spacing was selected. Pits of 50 cm3 were made and buffered with lime and cow dung. Planting was done with three month old rooted plants where roots were primed with respective bacterium/chemical. The experiment was in RCBD with eight treatments viz., Pseudomonas aeruginosa (Bp 35) + Phorate, P. putida (Bp 25) + Phorate, P. fluorescence (IISR 6)  (later identified as P.aeruginosa) + Phorate, Bacillus megaterium (Bp 17) + Metalaxyl Mz, Curtobacterium luteum (TC10) + Metalaxyl Mz, P. aeruginosa (IISR 853) + Metalaxyl Mz and Phorate + Metalaxyl Mz (chemical check) and an absolute control having no treatments.  The differential treatments were imposed at planting in May and subsequent application in September and thereafter every year. Initial two years, plants were maintained weed free by plastic mulching. Commonly, shade and irrigation were provided during summer in the first two years and thereafter only mulching and irrigation were continued. All the plants were sprayed with ZnSO4 (0.25%), DAP (0.5%) and MgSO4 (0.25%) during May and September from second year onwards. For controlling ‘Pollu’ beetle (Longitarsus nigripennis) and anthracnose (Colletotrichum gloeosporioides), quinalphos (0.075%) + Bordeaux mixture (1%) was sprayed twice during September and November. Soil biological properties and pathogen population were monitored regularly. No foot rot incidence due to Phytophthora spp. could be noticed in any of the treatments till the end of the experimental period. However, nematode infection, manifested as yellowing of the vines, as well as nematode population showed a gradual increase. Among the treatments, C. luteum (TC 10) with Metalaxyl- Mz showed significant reduction in nematode population and also showed better performance in growth and yield

Approaches in biotechnological applications of natural polymers

Natural polymers, such as gums and mucilage, are biocompatible, cheap, easily available and non-toxic materials of native origin. These polymers are increasingly preferred over synthetic materials for industrial applications due to their intrinsic properties, as well as they are considered alternative sources of raw materials since they present characteristics of sustainability, biodegradability and biosafety. As definition, gums and mucilages are polysaccharides or complex carbohydrates consisting of one or more monosaccharides or their derivatives linked in bewildering variety of linkages and structures. Natural gums are considered polysaccharides naturally occurring in varieties of plant seeds and exudates, tree or shrub exudates, seaweed extracts, fungi, bacteria, and animal sources. Water-soluble gums, also known as hydrocolloids, are considered exudates and are pathological products; therefore, they do not form a part of cell wall. On the other hand, mucilages are part of cell and physiological products. It is important to highlight that gums represent the largest amounts of polymer materials derived from plants. Gums have enormously large and broad applications in both food and non-food industries, being commonly used as thickening, binding, emulsifying, suspending, stabilizing agents and matrices for drug release in pharmaceutical and cosmetic industries. In the food industry, their gelling properties and the ability to mold edible films and coatings are extensively studied. The use of gums depends on the intrinsic properties that they provide, often at costs below those of synthetic polymers. For upgrading the value of gums, they are being processed into various forms, including the most recent nanomaterials, for various biotechnological applications. Thus, the main natural polymers including galactomannans, cellulose, chitin, agar, carrageenan, alginate, cashew gum, pectin and starch, in addition to the current researches about them are reviewed in this article.. }To the Conselho Nacional de Desenvolvimento Cientfíico e Tecnológico (CNPq) for fellowships (LCBBC and MGCC) and the Coordenação de Aperfeiçoamento de Pessoal de Nvíel Superior (CAPES) (PBSA). This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit, the Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and COMPETE 2020 (POCI-01-0145-FEDER-006684) (JAT)

Solitary osteoma of body of the mandible

Osteomas are relatively rare benign osteogenic neoplasm′s characterized by the proliferation of compact or cancellous bone. Osteomas can develop as peripheral (periosteal) masses attached to the cortical plates or as central lesions arising from endosteal bone surfaces. Although multiple osteomas of the jaws are a hallmark of Gardner′s syndrome (familial adenomatous polyposis), non-syndromic cases are typically solitary. The purpose of this paper is to present a large peripheral osteoma originating from the buccal surface of the mandible and causing asymmetry in a 35-year-old woman