7 research outputs found
Effect of heavy-ion irradiation on the nanoscale state of advanced reactor ferritic-martensitic steels
Recommended from our members
BERNAS ION SOURCE DISCHARGE SIMULATION
The joint research and development program is continued to develop steady-state ion source of decaborane beam for ion implantation industry. Bemas ion source is the wide used ion source for ion implantation industry. The new simulation code was developed for the Bemas ion source discharge simulation. We present first results of the simulation for several materials interested in semiconductors. As well the comparison of results obtained with experimental data obtained at the ITEP ion source test-bench is presented
Recommended from our members
STATUS OF ITEP DECABORANE ION SOURCE PROGRAM.
The joint research and development program is continued to develop steady-state ion source of decaborane beam for ion implantation industry. Both Freeman and Bemas ion sources for decaborane ion beam generation were investigated. Decaborane negative ion beam as well as positive ion beam were generated and delivered to the output of mass separator. Experimental results obtained in ITEP are presented
Recommended from our members
Ion Sources for Energy Extremes of Ion Implantation.
For the past four years a joint research and development effort designed to develop steady state, intense ion sources has been in progress with the ultimate goal to develop ion sources and techniques, which meet the two energy extreme range needs of mega-electron-volt and 100's of electron-volt ion implanters. This endeavor has already resulted in record steady state output currents of high charge state of Antimony and Phosphorous ions: P{sup 2+} (8.6 pmA), P{sup 3+} (1.9 pmA), and P{sup 4+} (0.12 pmA) and 16.2, 7.6, 3.3, and 2.2 pmA of Sb{sup 3+} Sb{sup 4+}, Sb{sup 5+}, and Sb{sup 6+} respectively. For low energy ion implantation our efforts involve molecular ions and a novel plasmaless/gasless deceleration method. To date, 1 emA of positive Decaborane ions were extracted at 10 keV and smaller currents of negative Decaborane ions were also extracted. Additionally, Boron current fraction of over 70% was extracted from a Bemas-Calutron ion source, which represents a factor of 3.5 improvement over currently employed ion sources
Control and diagnostic systems for specialized synchrotron radiation source of 4 generation SSRS-4
International audienceThe general layout for Specialized Synchrotron Radiation Source 4th generation SSRS 4 is under development by leading of National Research Center “Kurchatov institute”. In the framework of a collaborative project with European Synchrotron Radiation Facility (ESRF) supported by the Ministry of Education and Science of the Russian Federation, the applied research on determination of the configuration and key technical parameters for the control and beam diagnostic systems for 4th generation Specialized Synchrotron Radiation Source – SSRS- 4 is going on. The preliminary view of the proposed control and diagnostic system is presented and discussed. SSRS-4 inherits the experience of the scientific community including a great ESRF expertise in control system development (as founder of TANGO), robust diagnostics and long operational experience on ESRF’s accelerator
Recommended from our members
Sources and transport systems for low energy extreme of ion implantation
For the past seven years a joint research and development effort focusing on the design of steady state, intense ion sources has been in progress with the ultimate goal being to meet the two, energy extreme range needs of mega-electron-volt and 100's of electron-volt ion implanters. However, since the last Fortier is low energy ion implantation, focus of the endeavor has shifted to low energy ion implantation. For boron cluster source development, we started with molecular ions of decaborane (B{sub 10}H{sub 14}), octadecaborane (B{sub 18}H{sub 22}), and presently our focus is on carborane (C{sub 2}B{sub 10}H{sub 12}) ions developing methods for mitigating graphite deposition. Simultaneously, we are developing a pure boron ion source (without a working gas) that can form the basis for a novel, more efficient, plasma immersion source. Our Calutron-Berna ion source was converted into a universal source capable of switching between generating molecular phosphorous P{sub 4}{sup +}, high charge state ions, as well as other types of ions. Additionally, we have developed transport systems capable of transporting a very large variety of ion species, and simulations of a novel gasless/plasmaless ion beam deceleration method were also performed