34,237 research outputs found

    Nanometer lithography on silicon and hydrogenated amorphous silicon with low-energy electrons

    Get PDF
    We report the local oxidation of hydrogen terminated silicon (Si) surfaces induced with the scanning-tunneling microscope (STM) operating in air and by a beam of free low-energy electrons. With STM, oxide lines were written in Si(100) and Si(110) and transferred into the substrate by wet etching. In case of Si(110) trenches with a width as small as 35 nm and a depth of 300 nm were made. The same process has also successfully been applied to the patterning of hydrogenated amorphous silicon (a-Si:H) thin films. We demonstrate the fabrication of metallic ‘nanowires’ using a-Si:H as resist layer. With regard to the process of oxidation, it is found that the oxide written with STM is apparently not proportional to the electron current, in contrast to results obtained with a beam of free electrons in an oxygen gas-environment. The dose needed to remove the hydrogen was determined as a function of electron energy. This dose is minimal for 100 eV electrons amounting to 4 mC/cm2

    EXTENSION-2000 A.D.- COMMENTS

    Get PDF
    Views future changes in Extension and lists suggestions for Extension marketing workers to improve their position.Teaching/Communication/Extension/Profession,

    Solving the Poisson equation on small aspect ratio domains using unstructured meshes

    Full text link
    We discuss the ill conditioning of the matrix for the discretised Poisson equation in the small aspect ratio limit, and motivate this problem in the context of nonhydrostatic ocean modelling. Efficient iterative solvers for the Poisson equation in small aspect ratio domains are crucial for the successful development of nonhydrostatic ocean models on unstructured meshes. We introduce a new multigrid preconditioner for the Poisson problem which can be used with finite element discretisations on general unstructured meshes; this preconditioner is motivated by the fact that the Poisson problem has a condition number which is independent of aspect ratio when Dirichlet boundary conditions are imposed on the top surface of the domain. This leads to the first level in an algebraic multigrid solver (which can be extended by further conventional algebraic multigrid stages), and an additive smoother. We illustrate the method with numerical tests on unstructured meshes, which show that the preconditioner makes a dramatic improvement on a more standard multigrid preconditioner approach, and also show that the additive smoother produces better results than standard SOR smoothing. This new solver method makes it feasible to run nonhydrostatic unstructured mesh ocean models in small aspect ratio domains.Comment: submitted to Ocean Modellin

    Wave packet approach to transport in mesoscopic systems

    Full text link
    Wave packets provide a well established and versatile tool for studying time-dependent effects in molecular physics. Here, we demonstrate the application of wave packets to mesoscopic nanodevices at low temperatures. The electronic transport in the devices is expressed in terms of scattering and transmission coefficients, which are efficiently obtained by solving an initial value problem (IVP) using the time-dependent Schroedinger equation. The formulation as an IVP makes non-trivial device topologies accessible and by tuning the wave packet parameters one can extract the scattering properties for a large range of energies.Comment: 12 pages, 4 figure

    PACS and SPIRE photometer maps of M 33: First results of the HERschel M 33 Extended Survey (HERM33ES)

    Get PDF
    Context. Within the framework of the HERM33ES key program, we are studying the star forming interstellar medium in the nearby, metal-poor spiral galaxy M 33, exploiting the high resolution and sensitivity of Herschel. Aims. We use PACS and SPIRE maps at 100, 160, 250, 350, and 500 μm wavelength, to study the variation of the spectral energy distributions (SEDs) with galacto-centric distance. Methods. Detailed SED modeling is performed using azimuthally averaged fluxes in elliptical rings of 2 kpc width, out to 8 kpc galacto-centric distance. Simple isothermal and two-component grey body models, with fixed dust emissivity index, are fitted to the SEDs between 24 μm and 500 μm using also MIPS/Spitzer  data, to derive first estimates of the dust physical conditions. Results. The far-infrared and submillimeter maps reveal the branched, knotted spiral structure of M 33. An underlying diffuse disk is seen in all SPIRE maps (250–500 μm). Two component fits to the SEDs agree better than isothermal models with the observed, total and radially averaged flux densities. The two component model, with β fixed at 1.5, best fits the global and the radial SEDs. The cold dust component clearly dominates; the relative mass of the warm component is less than 0.3% for all the fits. The temperature of the warm component is not well constrained and is found to be about 60 K ± 10 K. The temperature of the cold component drops significantly from ~24 K in the inner 2 kpc radius to 13 K beyond 6 kpc radial distance, for the best fitting model. The gas-to-dust ratio for β = 1.5, averaged over the galaxy, is higher than the solar value by a factor of 1.5 and is roughly in agreement with the subsolar metallicity of M 33

    Tungsten-rhenium alloy thermocouples effective for high-temperature measurement

    Get PDF
    Tungsten-rhenium alloy thermocouples, specifically, insulated, sheathed W/W plus 26Re and W plus 5 Re/W plus 26 Re thermocouples, are effective for temperature measurement in excess of 2920 degrees C. These thermocouples have a high thermoelectric output and excellent relationship to temperatures up to 2760 degrees C

    A correction to the enhanced bottom drag parameterisation of tidal turbines

    Get PDF
    Hydrodynamic modelling is an important tool for the development of tidal stream energy projects. Many hydrodynamic models incorporate the effect of tidal turbines through an enhanced bottom drag. In this paper we show that although for coarse grid resolutions (kilometre scale) the resulting force exerted on the flow agrees well with the theoretical value, the force starts decreasing with decreasing grid sizes when these become smaller than the length scale of the wake recovery. This is because the assumption that the upstream velocity can be approximated by the local model velocity, is no longer valid. Using linear momentum actuator disc theory however, we derive a relationship between these two velocities and formulate a correction to the enhanced bottom drag formulation that consistently applies a force that remains closed to the theoretical value, for all grid sizes down to the turbine scale. In addition, a better understanding of the relation between the model, upstream, and actual turbine velocity, as predicted by actuator disc theory, leads to an improved estimate of the usefully extractable energy. We show how the corrections can be applied (demonstrated here for the models MIKE 21 and Fluidity) by a simple modification of the drag coefficient

    The von Karman equations, the stress function, and elastic ridges in high dimensions

    Full text link
    The elastic energy functional of a thin elastic rod or sheet is generalized to the case of an M-dimensional manifold in N-dimensional space. We derive potentials for the stress field and curvatures and find the generalized von Karman equations for a manifold in elastic equilibrium. We perform a scaling analysis of an M-1 dimensional ridge in an M = N-1 dimensional manifold. A ridge of linear size X in a manifold with thickness h << X has a width w ~ h^{1/3}X^{2/3} and a total energy E ~ h^{M} (X/h)^{M-5/3}. We also prove that the total bending energy of the ridge is exactly five times the total stretching energy. These results match those of A. Lobkovsky [Phys. Rev. E 53, 3750 (1996)] for the case of a bent plate in three dimensions.Comment: corrected references, 27 pages, RevTeX + epsf, 2 figures, Submitted to J. Math. Phy
    • …
    corecore