Birth Order and BMI in Teenage Girls

The goal of this study was to investigate the relation of birth order to relative weight and prevalence of obesity in a group of 13–15 years old girls. In 1997, 1458 girls were examined. The height and weight measured by trained staff were recorded. Family size and birth order were obtained by a questionnaire. For the purpose of the present study, 776 and 250 girls coming from two- and three-child full families, respectively, were selected from the total sample on the basis of complete information. The Body Mass Index (kg/m2) was adjusted to reference US population (NCHS) by means of the LMS parameters. Prevalence of overweight and obesity was defined according to recommendation of the International Obesity Task Force. The effect of birth order on BMI was tested by one-way analysis of variance. Prevalence of obesity was tested by the means of Pearson chi-square. First and second born girls from two-sibling families did not show significant differences in average standardized BMI. Relative weight significantly differs among girls coming from three sibling families, decreasing along with the birth order. The first-born girls were 1.5 times at higher risk of obesity in comparison to later- born girls. Differences in the proportion of overweight girls among birth order groups showed a high significance within three sibling families

Quantification of Carbonyl Compounds Generated from Ozone-Based Food Colorants Decomposition Using On-Fiber Derivatization-SPME-GC-MS

Fruit leathers (FLs) production produces some not-to-specification material, which contains valuable ingredients like fruit pulp, sugars and acidulates. Recovery of FL for product recycling requires decolorization. In earlier research, we proved the efficiency of an ozone-based decolorization process; however, it produces carbonyls as major byproducts, which could be of concern. A headspace solid-phase microextraction with on-fiber derivatization followed by gas chromatography-mass spectrometry was developed for 10 carbonyls analysis in ozonated FL solution/suspension. Effects of dopant concentration, derivatization temperature and time were studied. The adapted method was used to analyze ozonated FL solution/suspension samples. Dopant concentration and derivatization temperature were optimized to 17 mg/mL and 60 °C, respectively. Competitive extraction was studied, and 5 s extraction time was used to avoid non-linear derivatization of 2-furfural. The detection limits (LODs) for target carbonyls ranged from 0.016 and 0.030 µg/L. A much lower LOD (0.016 ppb) for 2-furfural was achieved compared with 6 and 35 ppb in previous studies. Analysis results confirmed the robustness of the adapted method for quantification of carbonyls in recycled process water treated with ozone-based decolorization. Ethanal, hexanal, 2-furfural, and benzaldehyde were identified as byproducts of known toxicity but all found below levels for concern

Understanding the role of semiochemicals on the reproductive behaviour of cheetahs (Acinonyx jubatus)—A review

The cheetah species (Acinonyx jubatus) is currently listed as vulnerable according to the International Union for Conservation of Nature (IUCN). Captive breeding has long since been used as a method of conservation of the species, with the aim to produce a healthy, strong population of cheetahs with an increased genetic variety when compared to their wild counterparts. This would then increase the likelihood of survivability once released into protected areas. Unfortunately, breeding females have been reported to be difficult due to the age of these animals. Older females are less fertile, have more difficult parturition, and are susceptible to asymmetric reproductive aging whereas younger females tend to show a significantly lower frequency of mating behaviour than that of older females, which negatively affects breeding introductions, and therefore mating. Nonetheless, the experience from breeding methods used in some breeding centres in South Africa and the Netherlands, which also rely on the role that semiochemicals play in breeding, proves that cheetahs can be bred successfully in captivity. This review aims to give the reader an in-depth overview of cheetahs’ reproductive physiology and behaviour, focusing on the role that pheromones play in this species. Furthermore, it aims to provide new insight into the use of semiochemicals to improve conservation strategies through captive breeding

Performance Evaluation of a Passively-Aerated Plastic-Wrapped Composting System Designed for Emergency Disposal of Swine Mortalities

Monitoring of a passively-aerated plastic-wrapped mortality composting system designed for emergency disposal of diseased swine highlighted the importance of the physical characteristics of materials used to envelop the carcasses. Inadequate moisture was a problem when using envelope materials such as ground cornstalks or straw having low density and high air-filled porosity. High O2 concentrations throughout these materials, and significantly higher moisture levels in the top layers than in the materials surrounding the carcasses, suggested significant air movement and transport of carcass moisture away from the carcasses, resulting in carcass desiccation and incomplete decay. Although internal temperatures and moisture levels in test units constructed with corn silage were much more favorable than in those constructed with cornstalks or straw, less carcass decomposition occurred. Settling and compaction, resulting in high bulk density and low air-filled porosity, caused low O2 concentrations that appeared to impair carcass decay in the silage test units

Performance of a Bio-secure Emergency Composting System for Disposal of Swine Carcasses

A plastic-wrapped passively-ventilated composting system used by the Canadian Food Inspection Agency for bio-secure emergency disposal of poultry mortalities during an avian influenza outbreak in 2004, was adapted and field tested to determine its feasibility for emergency disposal of infectious swine carcasses. System performance was evaluated during triple-replicated 8-week long trials, and 10-day long lab-scale studies were carried out to supplement the field results. Treatment variables included season (warm or cool), type of envelope material (cornstalks, oat straw, corn silage, wood shavings, alfalfa hay, and soybean straw), and initial moisture content of the envelope materials (low\u3c 20% w.b; moderate 40-65%). Performance variables included: final moisture content and leachate production; ability to sustain desirable internal O2 concentrations; % carcass (soft tissue) decomposition; and ability to attain and sustain pathogen-killing temperatures. Despite release of significant amounts of water from carcasses, and being wrapped in plastic sheeting, little leachate accumulation was observed and the moisture content of envelope materials was generally lower at the end of the trail than at the beginning. All materials, except corn silage, were able to maintain internal O2 concentrations of 10% or higher when air was supplied through flexible 10 cm diameter ducts spaced at 2m intervals. O2 concentrations in corn silage often dropped below 10% even though aeration ducts were spaced at 0.5m intervals. Corn silage demonstrated superior pathogen killing potential. Average daily temperatures in the carcass layer of silage test units during the first 30 days of composting (T30) exceeded 50 oC, and USEPA Class B criteria for pathogen reduction were achieved at 90% of monitored locations. T30 values for cornstalks, soybean straw, and alfalfa hay are about 40 oC, and Class B criteria were achieved in only 45-57% of monitored locations in the carcass layer. Wood shavings and oat straw had the worst temperature performance with T30 values of only about 30 oC, and a Class B success rate of about 35%. Mean soft tissue decomposition in the field was lowest in corn silage (72%), and highest in cornstalks and soybean straw (87% and 85% respectively)

Ozonation-Based Decolorization of Food Dyes for Recovery of Fruit Leather Wastes

Commercial manufacture of fruit leathers (FL) usually results in a portion of the product that is out of specification. The disposition of this material poses special challenges in the food industry. Because the material remains edible and contains valuable ingredients (fruit pulp, sugars, acidulates, etc.), an ideal solution would be to recover this material for product rework. A key practical obstacle to such recovery is that compositing of differently colored wastes results in an unsalable gray product. Therefore, a safe and scalable method for decolorization of FL prior to product rework is needed. This research introduces a novel approach utilizing ozonation for color removal. To explore the use of ozonation as a decolorization step, we first applied it to simple solutions of the commonly used food colorants 2-naphthalenesulfonic acid (Red 40), tartrazine (Yellow 5), and erioglaucine (Blue 1). Decolorization was measured by UV/vis spectrometry at visible wavelengths and with a Hunter colorimeter. Volatile and semivolatile byproducts from ozone-based colorant decomposition were identified and quantified with solid phase microextraction coupled with gas chromatography–mass spectrometry (SPME-GC-MS). Removal of Yellow 5, Red 40 and Blue 1 of about 65%, 80%, and 90%, respectively, was accomplished with 70 g of ozone applied per 1 kg of redissolved and resuspended FL. Carbonyl compounds were identified as major byproducts from ozone-induced decomposition of the food colorants. A conservative risk assessment based on quantification results and published toxicity information of potentially toxic byproducts, determined that ozone-based decolorization of FL before recycling is acceptable from a safety standpoint. A preliminary cost estimate based on recycling of 1000 tons of FL annually suggests a potential of $275,000 annual profit from this practice at one production facility alone

Efficacy and tolerability of an endogenous metabolic modulator (AXA1125) in fatigue-predominant long COVID: a single-centre, double-blind, randomised controlled phase 2a pilot study

Background: ‘Long COVID’ describes persistent symptoms, commonly fatigue, lasting beyond 12 weeks following SARS-CoV-2 infection. Potential causes include reduced mitochondrial function and cellular bioenergetics. AXA1125 has previously increased β-oxidation and improved bioenergetics in preclinical models along with certain clinical conditions, and therefore may reduce fatigue associated with Long COVID. We aimed to assess the efficacy, safety and tolerability of AXA1125 in Long COVID. / Methods: Patients with fatigue dominant Long COVID were recruited in this single-centre, double-blind, randomised controlled phase 2a pilot study completed in the UK. Patients were randomly assigned (1:1) using an Interactive Response Technology to receive either AXA1125 or matching placebo in a clinical based setting. Each dose (33.9 g) of AXA1125 or placebo was administered orally in a liquid suspension twice daily for four weeks with a two week follow-up period. The primary endpoint was the mean change from baseline to day 28 in the phosphocreatine (PCr) recovery rate following moderate exercise, assessed by 31P-magnetic resonance spectroscopy (MRS). All patients were included in the intention to treat analysis. This trial was registered at ClinicalTrials.gov, NCT05152849. / Findings: Between December 15th 2021, and May 23th 2022, 60 participants were screened and 41 participants were randomised and included in the final analysis. Changes in skeletal muscle phosphocreatine recovery time constant (τPCr) and 6-min walk test (6MWT) did not significantly differ between treatment (n = 21) and placebo group (n = 20). However, treatment with AXA1125 was associated with significantly reduced day 28 Chalder Fatigue Questionnaire [CFQ-11] fatigue score when compared with placebo (least squares mean difference [LSMD] −4.30, 95% confidence interval (95% CI) −7.14, −1.47; P = 0.0039). Eleven (52.4%, AXA1125) and four (20.0%, placebo) patients reported treatment-emergent adverse events; none were serious, or led to treatment discontinuation. / Interpretation: Although treatment with AXA1125 did not improve the primary endpoint (τPCr-measure of mitochondrial respiration), when compared to placebo, there was a significant improvement in fatigue-based symptoms among patients living with Long COVID following a four week treatment period. Further multicentre studies are needed to validate our findings in a larger cohort of patients with fatigue-dominant Long COVID. / Funding: Axcella Therapeutics

Precursor flares in OJ 287

We have studied three most recent precursor flares in the light curve of the blazar OJ 287 while invoking the presence of a precessing binary black hole in the system to explain the nature of these flares. Precursor flare timings from the historical light curves are compared with theoretical predictions from our model that incorporate effects of an accretion disk and post-Newtonian description for the binary black hole orbit. We find that the precursor flares coincide with the secondary black hole descending towards the accretion disk of the primary black hole from the observed side, with a mean z-component of approximately z_c = 4000 AU. We use this model of precursor flares to predict that precursor flare of similar nature should happen around 2020.96 before the next major outburst in 2022.Comment: to appear in the Astrophysical Journa

SIKE Round 2 Speed Record on ARM Cortex-M4

We present the first practical software implementation of Supersingular Isogeny Key Encapsulation (SIKE) round 2, targeting NIST’s 1, 2, and 5 security levels on 32-bit ARM Cortex-M4 microcontrollers. The proposed library introduces a new speed record of SIKE protocol on the target platform. We achieved this record by adopting several state-of-the-art engineering techniques as well as highly-optimized hand-crafted assembly implementation of finite field arithmetic. In particular, we carefully redesign the previous optimized implementations of filed arithmetic on 32-bit ARM Cortex-M4 platform and propose a set of novel techniques which are explicitly suitable for SIKE/SIDH primes. Moreover, the proposed arithmetic implementations are fully scalable to larger bit-length integers and can be adopted over different security levels. The benchmark result on STM32F4 Discovery board equipped with 32-bit ARM Cortex-M4 microcontrollers shows that the entire key encapsulation over p434 takes about 326 million clock cycles (i.e. 1.94 seconds @168MHz). In contrast to the previous optimized implementation of the isogeny-based key exchange on low-power 32-bit ARM Cortex-M4, our performance evaluation shows feasibility of using SIKE mechanism on the target platform. In comparison to the most of the post-quantum candidates, SIKE requires an excessive number of arithmetic operations, resulting in significantly slower timings. However, its small key size makes this scheme as a promising candidate on low-end microcontrollers in the quantum era by ensuring the lower energy consumption for key transmission than other schemes